MCQOPTIONS
Saved Bookmarks
MCQOPTIONS
This section includes 657 Mcqs, each offering curated multiple-choice questions to sharpen your Testing Subject knowledge and support exam preparation. Choose a topic below to get started.
| 1. |
Where is geothermal energy from volcanoes being harvested? |
| A. | United States |
| B. | Iceland |
| C. | Iran |
| D. | Greenland |
| Answer» C. Iran | |
| 2. |
Supercritical water is a liquid. |
| A. | False |
| B. | True |
| Answer» B. True | |
| 3. |
Which of the following is responsible for the volcanic geothermal heat? |
| A. | Water |
| B. | Hot dry rock |
| C. | Carbon dioxide |
| D. | Supercritical water |
| Answer» E. | |
| 4. |
What are deep hydrothermal systems? |
| A. | Hot dry rock |
| B. | Magma |
| C. | Permeable and fluid saturated region |
| D. | Impermeable and fluid saturated region |
| Answer» D. Impermeable and fluid saturated region | |
| 5. |
Deep hydrothermal systems are found at a depth of ______ |
| A. | 1km |
| B. | 2.5 – 5km |
| C. | 10km |
| D. | 1 – 2km |
| Answer» C. 10km | |
| 6. |
Enhanced geothermal resource is man-made. |
| A. | True |
| B. | False |
| Answer» B. False | |
| 7. |
What is the similarity between enhanced geothermal system and hot dry rock? |
| A. | Magma |
| B. | Presence of steam |
| C. | Presence of fluid |
| D. | Lack of fluid permeability |
| Answer» E. | |
| 8. |
What is the difference between enhanced geothermal system and hot dry rock? |
| A. | Lack of fluid permeability |
| B. | Fluid permeability |
| C. | Presence of fluid |
| D. | Presence of rocks |
| Answer» D. Presence of rocks | |
| 9. |
Which of the following fracture creation techniques is/are used in hot dry rock geothermal resource? |
| A. | Condensation and hydrofracking |
| B. | Hydrofracking and hydroshearing |
| C. | Hydroshearing and distillation |
| D. | Hydrofracking and combustion |
| Answer» C. Hydroshearing and distillation | |
| 10. |
What is hot dry rock geothermal resource made of? |
| A. | Granite |
| B. | Soil |
| C. | Solid carbon dioxide |
| D. | Liquid nitrogen |
| Answer» B. Soil | |
| 11. |
Which of the following is also called as a flash steam plant? |
| A. | Low temperature hydrothermal resource |
| B. | Dry steam |
| C. | Hydrogen |
| D. | Hot water |
| Answer» E. | |
| 12. |
Hot water is _________ dominated. |
| A. | vapour |
| B. | nitrogen |
| C. | liquid |
| D. | Bose-Einstein condensate |
| Answer» D. Bose-Einstein condensate | |
| 13. |
Dry steam is _________ dominated. |
| A. | liquid |
| B. | vapour |
| C. | solid |
| D. | plasma |
| Answer» C. solid | |
| 14. |
Which of the following is a type of high temperature geothermal resource? |
| A. | Dry steam |
| B. | Dry water |
| C. | Wet steam |
| D. | Water |
| Answer» B. Dry water | |
| 15. |
A ___________ consists of colourants dissolved and/or suspended in a ‘vehicle’ or solvent. |
| A. | ceramic mixture |
| B. | paint |
| C. | wood stain |
| D. | plaster |
| Answer» D. plaster | |
| 16. |
Which type of bond does the figure below represents? |
| A. | flemish bond |
| B. | monk bond |
| C. | sussex bond |
| D. | english bond |
| Answer» B. monk bond | |
| 17. |
A brick laid on the long narrow side with the broad face of the brick exposed is known as ______________ |
| A. | shiner |
| B. | header |
| C. | sailor |
| D. | soldier |
| Answer» C. sailor | |
| 18. |
A brick laid flat with its long narrow side exposed is known as ____________ |
| A. | stretcher |
| B. | header |
| C. | rowlock |
| D. | shiner |
| Answer» B. header | |
| 19. |
Horizontal boards at the top, bottom, and optionally in the middle of a door that join the two stiles and split the door into two or more rows of panels is known as ______________ |
| A. | panels |
| B. | mullions |
| C. | stiles |
| D. | rails |
| Answer» E. | |
| 20. |
Which type of door does the figure show? |
| A. | Hinged doors |
| B. | Folding door |
| C. | Rotating door |
| D. | Automatic door |
| Answer» C. Rotating door | |
| 21. |
Ideally, architects of houses design rooms to meet the needs of the people who will live in the house, this is known as ___________ |
| A. | planning |
| B. | layout |
| C. | finishing |
| D. | interior design |
| Answer» E. | |
| 22. |
Bullock cart can carry a load of ¾ to 1 tonne depending on the type of materials and the nature of road. |
| A. | True |
| B. | False |
| Answer» B. False | |
| 23. |
Calculate the cost of carriage of 50,000 bricks by bullock carts, from a distance of 7 km on kutcha road. The cart can make two trips per day and can carry 250 bricks per trip. The wages of bullock cart may be taken as Rs.50 per day including the driver. |
| A. | Rs.10,000 |
| B. | Rs.5000 |
| C. | Rs.1000 |
| D. | Rs.500 |
| Answer» C. Rs.1000 | |
| 24. |
Which function is performed by counter emf of a DC motor? |
| A. | Exceeds supply voltage |
| B. | Aids applied voltage |
| C. | Helps in energy conversion |
| D. | Regulates its armature voltage |
| Answer» D. Regulates its armature voltage | |
| 25. |
Armature resistance control method is used for the speed _____________ |
| A. | Above rated speed |
| B. | Below rated speed |
| C. | Can be used anywhere |
| D. | Can’t tell |
| Answer» C. Can be used anywhere | |
| 26. |
Field weakening control method is used for the speed _________ |
| A. | Above rated speed |
| B. | Below rated speed |
| C. | Can be used anywhere |
| D. | Can’t tell |
| Answer» B. Below rated speed | |
| 27. |
For very sensitive and wide speed control, which of the following method is preferred? |
| A. | Armature control |
| B. | Ward-Leonard control |
| C. | Multiple voltage control |
| D. | Field control |
| Answer» C. Multiple voltage control | |
| 28. |
Torque developed by a DC motor depends upon _____________ |
| A. | magnetic field |
| B. | active length of the conductor |
| C. | current flow through the conductors |
| D. | Current, active length, no. of conductors, magnetic field all |
| Answer» E. | |
| 29. |
If a DC motor designed for 45°C ambient temperature is to be used for 55°C ambient temperature, then the motor ___________ |
| A. | Of lower HP should be selected |
| B. | Of higher HP should be selected |
| C. | Can be used for 50°C ambient temperature also |
| D. | Is to be de-rated by a factor recommended by manufacturer and select the next higher H.P. motor |
| Answer» E. | |
| 30. |
Which of the following motor is used where high starting torque and wide speed range control is required? |
| A. | All motors |
| B. | Induction motor |
| C. | Synchronous motor |
| D. | DC motor |
| Answer» E. | |
| 31. |
Assume that the SLR parser for a grammar G has n1 states and the LALR parser for G has n2 states. Hence which one is true? |
| A. | N1 is necessarily less than n2 |
| B. | N1 is necessarily equal to n2 |
| C. | N1 is necessarily greater than n2 |
| D. | None of the mentioned |
| Answer» C. N1 is necessarily greater than n2 | |
| 32. |
Which of the following symbols table implementation is based on the property of locality of reference? |
| A. | Hash Table |
| B. | Search tree |
| C. | Self organizing list |
| D. | Linear list |
| Answer» D. Linear list | |
| 33. |
_____________ is a graph representation of a derivation. |
| A. | The parse tree |
| B. | Oct tree |
| C. | Binary tree |
| D. | None of the mentioned |
| Answer» B. Oct tree | |
| 34. |
_________ or scanning is the process where the stream of characters making up the source program is read from left to right and grouped into tokens. |
| A. | Lexical Analysis |
| B. | Diversion |
| C. | Modelling |
| D. | None of the mentioned |
| Answer» B. Diversion | |
| 35. |
The graph that shows basic blocks and their successor relationship is called __________ |
| A. | DAG |
| B. | Flow Chart |
| C. | Control Graph |
| D. | Hamilton graph |
| Answer» C. Control Graph | |
| 36. |
In a bottom up evaluation of a syntax direction definition, inherited attributes can __________ |
| A. | Always be evaluated |
| B. | Be evaluated only if the definition is L –attributed |
| C. | Evaluation only done if the definition has synthesized attributes |
| D. | None of the mentioned |
| Answer» D. None of the mentioned | |
| 37. |
A synthesized attribute is an attribute whose value at a parse tree node depends on __________ |
| A. | Attributes at the siblings only |
| B. | Attributes at parent node only |
| C. | Attributes at children nodes only |
| D. | None of the mentioned |
| Answer» D. None of the mentioned | |
| 38. |
Input to code generator is __________ |
| A. | Source code |
| B. | Intermediate code |
| C. | Target code |
| D. | All of the mentioned |
| Answer» C. Target code | |
| 39. |
The range of temperature at which mesophilic microorganism becomes active in sludge digester is ___________ |
| A. | 30-40oC |
| B. | 10-40oC |
| C. | 20-50oC |
| D. | 20-40oC |
| Answer» E. | |
| 40. |
The minimum size of sludge digestion tank is ___________ |
| A. | 0.5m |
| B. | 1m |
| C. | 2m |
| D. | 3m |
| Answer» E. | |
| 41. |
The high rate sludge digestion tanks are used when the capacity of the tank is ____ million liters per day. |
| A. | 1 |
| B. | 3 |
| C. | 4 |
| D. | 10 |
| Answer» D. 10 | |
| 42. |
Which of the following is obtained in the secondary tank in two stage sludge digester? |
| A. | Partially digested sludge |
| B. | Partially digested sludge and supernatant liquor |
| C. | Digested sludge and supernatant liquor |
| D. | supernatant liquor |
| Answer» D. supernatant liquor | |
| 43. |
The maximum temperature at which thermophilic microorganisms remain active in sludge digester is ___________ |
| A. | 60oC |
| B. | 40oC |
| C. | 30oC |
| D. | 20oC |
| Answer» B. 40oC | |
| 44. |
The color of digestive sludge is ___________ |
| A. | Blue |
| B. | Black |
| C. | Brown |
| D. | Gray |
| Answer» C. Brown | |
| 45. |
The form of sludge which is free from pathogenic bacteria is ___________ |
| A. | Undigested sludge |
| B. | Digested sludge |
| C. | Primary sludge |
| D. | Supernatant liquor |
| Answer» C. Primary sludge | |
| 46. |
How many stages are there in the sludge digestion process? |
| A. | 2 |
| B. | 3 |
| C. | 4 |
| D. | 5 |
| Answer» C. 4 | |
| 47. |
Driver has high output level when____________ |
| A. | Input is high |
| B. | Input is high |
| C. | All of the mentioned |
| D. | None of the mentioned |
| Answer» C. All of the mentioned | |
| 48. |
OR gate has high output if ____________ |
| A. | One input is low |
| B. | One input is high |
| C. | All of the mentioned |
| D. | None of the mentioned |
| Answer» C. All of the mentioned | |
| 49. |
Identify the gate? |
| A. | AND gate |
| B. | INHIBIT gate |
| C. | XOR gate |
| D. | XNOR gateView Answer |
| Answer» C. XOR gate | |
| 50. |
In op-amp IC negative saturation is defined by ______________ |
| A. | Logic High |
| B. | Logic Low |
| C. | Inverter |
| D. | None of the mentioned |
| Answer» C. Inverter | |