Explore topic-wise MCQs in Geotechnical Engineering.

This section includes 214 Mcqs, each offering curated multiple-choice questions to sharpen your Geotechnical Engineering knowledge and support exam preparation. Choose a topic below to get started.

101.

Even after the excess pore pressure due to consolidation is dissipated, change in void ratio continues and this phenomenon is known as _____________

A. secondary consolidation
B. pre-consolidation
C. under- consolidation
D. normal- consolidation
Answer» B. pre-consolidation
102.

The consolidation test is also known as ____________

A. impact test
B. flexure test
C. Standard Oedometer test
D. standard proctor test
Answer» B. flexure test
103.

In polar form the term, \(\frac{∂r}{∂x}\) is given by______

A. \(\frac{∂r}{∂x}=sinθ\)
B. \(\frac{∂r}{∂x}=cosθsinθ\)
C. \(\frac{∂r}{∂x}=cosθ \)
D. \(\frac{∂r}{∂x}=sin2θ\)
Answer» D. \(\frac{∂r}{∂x}=sin2θ\)
104.

The term \(\frac{∂\overline{u}}{∂t}\) in terms of coefficient of volume change and coefficient of permeability is given by ____________

A. \(\frac{∂\overline{u}}{∂t}=\frac{k}{m_v γ_w} \frac{∂\overline{u}}{∂z}\)
B. \( \frac{∂\overline{u}}{∂t}=\frac{k}{m_v γ_w} \frac{∂\overline{u}}{∂z}\)
C. \( \frac{∂\overline{u}}{∂t}=\frac{k}{m_v γ_w} \frac{∂^2\overline{u}}{∂z^2}\)
D. \( \frac{∂\overline{u}}{∂t}=\frac{k}{m_v γ_w} \frac{∂\overline{u}}{∂z}\)
Answer» D. \( \frac{∂\overline{u}}{∂t}=\frac{k}{m_v γ_w} \frac{∂\overline{u}}{∂z}\)
105.

If the initial voids ratio is 0.964 for a layer of height 100cm. It is located with 200KN/m² and the void ratio becomes 0.822. Find the settlement.

A. 8.54 cm
B. 7.43 cm
C. 7.22 cm
D. 8.44 cm
Answer» D. 8.44 cm
106.

A clay sample 24mm thick takes 20 minutes to consolidate 50% with single drainage. The field clay layer from which sample was obtained takes 386 days to consolidate 50% with single drainage. Find the depth of the clay layer in the field.

A. 200cm
B. 367cm
C. 400cm
D. 569cm
Answer» D. 569cm
107.

The laboratory consolidation test is conducted with an apparatus called ___________

A. consolidometer
B. impact testing machine
C. compression testing machine
D. flexural testing machine
Answer» B. impact testing machine
108.

For a given difference in pressure, the value of aᵥ _______ as pressure increases.

A. increases
B. decreases
C. is same
D. becomes unity
Answer» C. is same
109.

A soil sample is having voids ratio 0.72 under a pressure of 200KN/m². If the void ratio is reduced to 0.5 under 450kn/m² load, then find the change in effective pressure.

A. 4000 kN/m²
B. 250 kN/m²
C. 350 kN/m²
D. 2000 kN/m²
Answer» C. 350 kN/m²
110.

For logarithm of time fitting method, the coefficient of consolidation is detained from ________

A. \(c_v=\frac{(T_v)_{70} d^3}{t_{70}} \)
B. \(c_v=\frac{(T_v)_{80} d^2}{t_{80}} \)
C. \(c_v=\frac{(T_v)_{90} d^4}{t_{90}} \)
D. \(c_v=\frac{(T_v)_{50} d^2}{t_{50}} \)
Answer» E.
111.

The coefficient of consolidation is given by ___________

A. \(C_v=\frac{q}{m_v γ_w}\)
B. \(C_v=\frac{1}{m_v γ_w}\)
C. \(C_v=\frac{k}{m_v} \)
D. \(C_v=\frac{k}{m_v γ_w}\)
Answer» E.
112.

The average drainage path for the pressure increment is calculated from the formula of ______

A. \(d=\frac{1}{2} \left[\frac{H_{‘}-H_f}{2}\right] \)
B. \(d=\frac{1}{2} \left[\frac{H_{‘}}{2}\right] \)
C. \(d=\frac{1}{2} \left[\frac{H_{‘}-H_f}{4}\right] \)
D. \(d=\frac{1}{2} \left[\frac{H_f-H_{‘}^{’}}{2}\right] \)
Answer» B. \(d=\frac{1}{2} \left[\frac{H_{‘}}{2}\right] \)
113.

The consolidation test data are not used to find _________

A. specific gravity of soil particles
B. voids ratio and coefficient of volume change
C. coefficient of consolidation
D. coefficient of permeability
Answer» B. voids ratio and coefficient of volume change
114.

In three dimension consolidation equation soil is assumed to be ______________

A. partially saturated
B. dry
C. completely saturated
D. both dry and partially saturated
Answer» D. both dry and partially saturated
115.

After the hydrostatic pressure is reduced to zero, some compression of soil takes place by the process of _________

A. effective pressure
B. load increment
C. primary consolidation
D. secondary consolidation
Answer» E.
116.

In fluid flow calculations, water is considered as incompressible.

A. True
B. False
C. May be True or False
D. Can't say
Answer» B. False
117.

The delay caused in consolidation by the slow drainage of water out of a saturated soil mass is called as __________

A. hydrodynamic lag
B. hydrodynamic pressure
C. hydrostatic pressure
D. pore pressure
Answer» B. hydrodynamic pressure
118.

The reduction in volume of soil which is due to squeezing out of water from the voids is __________

A. effective pressure
B. load increment
C. primary consolidation
D. secondary consolidation
Answer» D. secondary consolidation
119.

The curve is straight up to _______________

A. U = 60%
B. U = 65%
C. U = 70%
D. U = 55%
Answer» B. U = 65%
120.

The final settlement in terms of voids ratio is given by ____________

A. \(ρ_f=\frac{e_o-e}{e_o}H\)
B. \(ρ_f=\frac{e}{1+e_o}H\)
C. \(ρ_f=\frac{e_o-e}{1+e_o}\)
D. \(ρ_f=\frac{e_o-e}{1+e_o}H\)
Answer» E.
121.

The slope of isochrones at any point indicates ___________

A. change of pore pressure with total pressure
B. change of effective pressure with pore pressure
C. change of pore pressure with depth at time interval t
D. change of pore pressure with volume
Answer» D. change of pore pressure with volume
122.

Secondary consolidation is also known as __________

A. pre-consolidation
B. secondary compression
C. under- consolidation
D. normal- consolidation
Answer» C. under- consolidation
123.

The mᵥ for pressure range 100 to 200 KN/m² is 0.74 m² /MN. The change in void ratio is 0.157. Find the initial void ratio.

A. 2.456
B. 5.645
C. 1.121
D. 8.553
Answer» D. 8.553
124.

If the final water content is 30% and specific gravity is 2.65 for a soil sample, then its final void ratio is _________

A. 0.900
B. 0.795
C. 0.667
D. 0.549
Answer» C. 0.667
125.

For a finite surface loading, the intensity of change in effective pressure decreases with depth of layer in linear manner.

A. True
B. False
C. May be True or False
D. Can't say
Answer» C. May be True or False
126.

A clay sample in laboratory test has 24mm thickness. It is tested with single drainage and consolidated 50%. The clay layer from which sample was obtained is 4m thick. Find the time to consolidate 50% with double drainage.

A. 44 days
B. 55 days
C. 97 days
D. 107 days
Answer» D. 107 days
127.

The coefficient of volume change mᵥ is given by ______

A. \(m_v= \frac{1}{∆σ’} \)
B. \(m_v= \frac{-∆e}{1+e_o} \)
C. \(m_v= \frac{-∆e}{1+e_o} \frac{1}{∆σ}\)
D. \(m_v= \frac{-∆e}{1+e_o} \frac{1}{∆σ’} \)
Answer» E.
128.

A clay sample 24mm thick takes 20 minutes to consolidate 50% with single drainage. The field clay layer from which sample was obtained takes 386 days to consolidate 50% with double drainage. Find the depth of the clay layer in the field.

A. 800cm
B. 500cm
C. 600cm
D. 480cm
Answer» B. 500cm
129.

Porous stones are kept at the top and bottom of specimen in consolidation test.

A. True
B. False
C. May be True or False
D. Can't say
Answer» B. False
130.

The decrease in volume is given by the equation ___________

A. ∆v=-V₀ ∆σ’
B. ∆v=-aᵥ V₀ ∆σ’
C. ∆v=-mᵥ ∆σ’
D. ∆v=-mᵥ V₀ ∆σ’
Answer» E.
131.

If the specimen height H is 24mm and height of solids Hₛ is 13.45mm, then find the voids ratio.

A. 0.786
B. 0.432
C. 2
D. 34
Answer» B. 0.432
132.

The coefficient of volume change with respect to thickness is given by ______

A. \(m_v= H\frac{1}{∆σ’} \)
B. \(m_v= \frac{-∆H}{H_0} \)
C. \(m_v= \frac{-∆H}{H_0}\frac{1}{e}\)
D. \(m_v= \frac{-∆H}{H_0}\frac{1}{∆σ’} \)
Answer» E.
133.

From the coefficient of consolidation and coefficient of volume change, the coefficient of permeability is found by equation ____________

A. k=mᵥ γᵥ
B. k=Cᵥ γᵥ
C. k=Cᵥ mᵥ γᵥ
D. k=Cᵥ mᵥ
Answer» D. k=Cᵥ mᵥ
134.

For the consolidation of 90%, find the time factor.

A. 0.898
B. 0.848
C. 0.976
D. 0.934
Answer» C. 0.976
135.

The change of volume per unit time is __________

A. \(\frac{∂∆V}{∂z}=-V_0 ∆σ’\)
B. \(\frac{∂∆V}{∂z}=-a_v V_0 ∆σ’\)
C. \(\frac{∂∆V}{∂z}=-m_v \frac{∂∆σ’}{∂t}\)
D. \(\frac{∂∆V}{∂z}=-m_v dxdydz \frac{∂∆σ’}{∂t}\)
Answer» E.
136.

A clay sample in laboratory test has 24mm thickness. It is tested with double drainage and consolidated 50%. The clay layer from which sample was obtained is 4m thick. Find the time to consolidate 50% with single drainage.

A. 1544 days
B. 1455 days
C. 1322 days
D. 1799 days
Answer» B. 1455 days
137.

The compression index for normally consolidated soil is ____________

A. constant
B. variable
C. zero
D. unity
Answer» B. variable
138.

Secondary compression proceeds linearly with ________

A. root of time
B. square of time
C. logarithm of time
D. cube of time
Answer» D. cube of time
139.

The distribution of excess hydrostatic pressure is represented by ___________

A. straight line
B. curve
C. helical curve
D. closed curve
Answer» C. helical curve
140.

To find pre-consolidation pressure __________ sample is used.

A. undisturbed clay
B. disturbed clay
C. gravel
D. sand gravel
Answer» B. disturbed clay
141.

If the final height of specimen Hf is 13.45mm and final voids is 0.864, then the change of voids ratio ∆e with respect to ∆H is ____________

A. ∆e=0.139∆H
B. ∆e=0.123∆H
C. ∆e=0.178∆H
D. ∆e=0.148∆H
Answer» B. ∆e=0.123∆H
142.

The isochrones represents ___________

A. water levels in piezometric tubes at different time
B. water levels in piezometric tubes at the same level
C. water levels in piezometric tubes at different levels
D. water levels in piezometric tubes at the same time
Answer» E.
143.

The hydraulic gradient i is given by _________

A. \(i=\frac{γ_w ∂h}{∂z}\)
B. \(i=\frac{∂h}{γ_w ∂z}\)
C. \(i=\frac{\overline{u}∂h}{∂z}\)
D. \(i=\frac{∂h}{∂z}\)
Answer» E.
144.

In terms of compression index and voids ratio for normally consolidated soil, the final settlement is _________

A. \(ρ_f=Hlog_{10} \frac{σ’}{σ’_0}\)
B. \(ρ_f=H \frac{C_c}{1+e_o} log_{10} \frac{σ’}{σ’_0}\)
C. \(ρ_f=\frac{C_c}{1+e_o} log_{10} \frac{σ’}{σ’_0}\)
D. \(ρ_f=H \frac{1}{1+e_o} log_{10} \frac{σ’}{σ’_0}\)
Answer» C. \(ρ_f=\frac{C_c}{1+e_o} log_{10} \frac{σ’}{σ’_0}\)
145.

If a soil A has coefficient of volume change as 0.536m²/MN and the ratio of coefficient of volume change of A and B soils is 1.845, then find mv for soil B.

A. 0.255 m²/MN
B. 0.291 m²/MN
C. 0.234 m²/MN
D. 0.345 m²/MN
Answer» C. 0.234 m²/MN
146.

For a dry soil mass of 180.4 g, specific gravity 2.68 and cross-sectional area of specimen as 50 cm², find the height of solids Hₛ.

A. 13.45 mm
B. 14 mm
C. 17 mm
D. 19.5 mm
Answer» B. 14 mm
147.

In three dimension consolidation equation soil is assumed to be ____________

A. homogenous
B. non-homogenous
C. anisotropic
D. heterogeneous
Answer» B. non-homogenous
148.

The equation for pre-compressed soil given by Hough (1957) is ______

A. Cc=0.009(wL-10%)
B. Cc=0.007(wL-10%)
C. Cc=0.3(e0-0.27)
D. Cc=0.007(wL-30%)
Answer» D. Cc=0.007(wL-30%)
149.

The three dimensional consolidation involves _____________

A. only horizontal flow and strain
B. only vertical flow and strain
C. both horizontal as well as vertical flows and strains
D. only radial flow and strain
Answer» D. only radial flow and strain
150.

The equation given by Skempton for compression index for a remoulded sample is ___________

A. Cc=0.009(wL-10%)
B. Cc=0.007(wL-10%)
C. Cc=0.007(wL-20%)
D. Cc=0.007(wL-30%)
Answer» C. Cc=0.007(wL-20%)