Explore topic-wise MCQs in Testing Subject.

This section includes 657 Mcqs, each offering curated multiple-choice questions to sharpen your Testing Subject knowledge and support exam preparation. Choose a topic below to get started.

1.

What is TCP / IP Protocol?

A. It receives data from application as a single stream.
B. It uses a three way handshake to establish a connection.
C. It is a Connection Oriented Program
D. All the Above
Answer» E.
2.

Which command gets set as a trunk port on a 2960 Switch?

A. switchport mode trunk
B. trunk on
C. trunk all
D. switchport trunk on
Answer» B. trunk on
3.

What does the Cryptographic hash function return when it takes an arbitrary block of data?

A. Variable size bit string
B. Fixed size bit string
C. All of the Above
D. None of the Above
Answer» C. All of the Above
4.

Data Encryption Standard (DES) is a __________.

A. Stream Cipher
B. Bit Cipher
C. Block Cipher
D. Substitution Cipher
Answer» D. Substitution Cipher
5.

In Transport Layer which protocol does DHCP used?

A. UDP
B. ARP
C. IP
D. Both B and C
Answer» B. ARP
6.

Which command allows to set a Telnet password on a Cisco router?

A. line con 0 4
B. line vty 0 4
C. line telnet 0 4
D. line aux 0 4
Answer» C. line telnet 0 4
7.

Which of the following is / are the advantages of connectionless networking?

A. Reliability
B. It cannot lose connection state.
C. Dynamically rerouted
D. All of the above.
Answer» E.
8.

What command is used to take backup on IOS?

A. copy flash tftp
B. copy ios tftp
C. backup IOS disk
D. copy tftp flash
Answer» B. copy ios tftp
9.

In OSI model where is a hub located?

A. Transport Layer
B. Network Layer
C. Physical Layer
D. Data Link Layer
Answer» D. Data Link Layer
10.

Consider the following characteristics,1. Acknowledgments2. Sequencing3. Flow controlThe above characteristics are indicated in which OSI layer?

A. Layer 4
B. Layer 7
C. Layer 3
D. Layer 2
Answer» B. Layer 7
11.

Which of the following statements is / are true for ICMP packets?

A. It can provide hosts with information about network problems.
B. It is encapsulated within IP datagrams.
C. It is encapsulated within UDP datagrams.
D. Both A and B
Answer» E.
12.

The following is the binary number,101110111Convert this number into decimal and hexadecimal format.

A. 83 / 0xC5
B. 69 / 0x210
C. 183 / B7
D. 137 / A5
Answer» D. 137 / A5
13.

Which protocol is used to find the hardware address of a local device?

A. ARP
B. IP
C. ICMP
D. RARP
Answer» B. IP
14.

In which of the following OS is Internet Packet Exchanger (IPX) / Sequence Package Exchanger (SPX) used?

A. MS-DOS
B. Mac OS
C. Windows 95
D. Novell's Netware Network
Answer» E.
15.

Which of the following switching technologies reduces the size of the broadcast domain?

A. VLAN
B. ISL
C. STP
D. ARP
Answer» B. ISL
16.

Which of the following is / are the advantages of connection - oriented networking?

A. Quality of service
B. No Priority service
C. Bandwidth utilization
D. All of the above
Answer» E.
17.

Which protocol is mostly used to send unknown messages back from a destination network to an originating host?

A. TCP
B. UDP
C. BootP
D. ICMP
Answer» E.
18.

In a 12 - port switch, when a network is segmented, how many broadcast domains are created?

A. 5
B. 1
C. 12
D. 2
Answer» C. 12
19.

Which operation does the following command allow you to perform?' router A(config)#line cons 0 '

A. Shut down the router
B. Disable console connections
C. Set the telnet password
D. Set your console password
Answer» E.
20.

Why do we use flow control in the network?

A. It reassemble segments in the correct order at the destination device.
B. It ensures that data is retransmitted if an acknowledgment is not received.
C. It regulate the size of each segment.
D. It provides a means for the receiver to govern the amount of data sent by the sender.
Answer» E.
21.

_________ allows a router to respond to an ARP request that is intended for a remote host.

A. Inverse ARP (IARP)
B. Gateway DP
C. Reverse ARP (RARP)
D. Proxy ARP
Answer» E.
22.

Which is the correct order when the data is encapsulated?

A. Data, Segment, Frame, Packet, Bit
B. Data, Segment, Packet, Frame, Bit
C. Segment, Data, Packet, Frame, Bit
D. Data, Frame, Packet, Segment, Bit
Answer» C. Segment, Data, Packet, Frame, Bit
23.

Which of the following is the type of RJ45 UTP cable that is used between switches?

A. Twisted Pair Cable
B. Serial and Parallel Cable
C. Crossover Cable
D. Straight - through Network Cable
Answer» D. Straight - through Network Cable
24.

Which of the following is true about Threshold ?

A. Threshold is a value.
B. Threshold has value levels, such as minimum level, maximum level, equal level.
C. If the data value doesn't suit the threshold value, then it indicates that this data value might lead to poor performance of the network.
D. All of the above
Answer» E.
25.

Which protocol does the PPP protocol provide for handling the capabilities of theconnection/link on the network?

A. LCP
B. NCP
C. Both a and b
D. TCP
Answer» D. TCP
26.

Which of the following are the HTTP methods (request types)?I. GETII. POSTIII. PATCHIV. BODYV. CREATEVI. OPTION

A. I, II, III, IV, V
B. I, II
C. IV, V, VI
D. I, II, III, VI
Answer» E.
27.

Define the term DHCP server.

A. administrator requires to add an entry for each computer in DHCP.
B. assigned a permanent address to the server software.
C. doesn't allow a computer to join a new network.
D. None of the above.
Answer» C. doesn't allow a computer to join a new network.
28.

Which of the following protocol is widely used in Dynamic assignment?

A. BOOTP
B. DHCP
C. RARP
D. DCHP
Answer» C. RARP
29.

Match the following List 1 to List 21. DHCP Server ------------ i) works as a virtual post office2. Proxy Server ------------- ii) automatically provides an internet protocol.3. Mail Server ---------------- iii) make indirect network connections to other network services.

A. 1-iii, 2i-, 3-ii
B. 1-iii, 2-ii, 3-i
C. 1-ii, 2-iii-, 3-i
D. 1-ii, 2i-, 3-iii
Answer» D. 1-ii, 2i-, 3-iii
30.

Match the followingList 1 to List 21. Ping ------------ i) discover the routes2.Traceroute ----- ii) method for troubleshooting the accessibility of devices3. Netstat --------- iii) control the network connections on Windows NT/XP4. Ipconfig -------- iv) finding problems in the network

A. 1-iii, 2-i, 3-iv, 4-ii
B. 1-ii, 2-i, 3-iv, 4-iii
C. 1-i, 2-iii, 3-ii, 4-iv
D. 1-iv, 2-ii, 3-iii, 4-ii
Answer» C. 1-i, 2-iii, 3-ii, 4-iv
31.

Consider the following types,I. Destination unreachableII. Source quenchIII. Query MessagesIV. Time exceededV . RedirectionIn the above, which is/are the error reporting types?

A. I, II, III
B. I, II, IV, V
C. III, IV, V
D. III, II, IV, V
Answer» C. III, IV, V
32.

Networking: Why Piggybacking technique is used?

A. To take the backup of data packets.
B. To improve the efficiency of the unidirectional protocols.
C. To improve the efficiency of the bidirectional protocols.
D. None of the above.
Answer» D. None of the above.
33.

Networking: Which of the following addresses is used to deliver a message to the correct application program running on a host?

A. Port
B. IP
C. Logical
D. Physical
Answer» B. IP
34.

Networking: In classful addressing, the IP address 190.255.254.254 belongs to which class?

A. Class A
B. Class B
C. Class C
D. Class D
Answer» C. Class C
35.

Networking: Match the following :a. Data linklayer --------- i. Flowcontrolb. Network layer --------- ii. Node tonodedeliveryc. Transport layer ------- iii. Mailservicesd. Application layer ----iv. Routing

A. a-ii , b-i , c-iv , d-iii
B. a-ii , b-iv , c-i , d-iii
C. a-ii , b-i , c-iii , d-iv
D. a-ii , b-iv , c-iii , d-i
Answer» C. a-ii , b-i , c-iii , d-iv
36.

Networking: Which one of the following uses UDP as the transport protocol?

A. SMTP
B. HTTP
C. Telnet
D. DNS
Answer» E.
37.

What is the default port of TFTP?

A. 3214
B. 69
C. 4012
D. 101
Answer» C. 4012
38.

What kind of task does VLAN do in a network?

A. It provides multiple broadcast domains within a single collision domain.
B. It breaks up the broadcast domains in a layer 2 switch internetwork.
C. It acts as the fastest port to all servers.
D. It provides multiple collision domains.
Answer» C. It acts as the fastest port to all servers.
39.

Which of the following statements is / are related to a stub network?

A. A network with only one entry and exit point.
B. A network with only one entry and no exit point.
C. A network with more than one exit and entry point
D. A network with more than one exit point.
Answer» B. A network with only one entry and no exit point.
40.

Which layer of TCP / IP stack is equivalent to the transport layer of the OSI model?

A. Network Access
B. Internet
C. Host - to - Host
D. Application
Answer» D. Application
41.

Match the following List 1 to List 21. Repeaters ------------- i) Connects multiple device segments.2. Bridges ----------------- ii) Provide translation services between incompatible LANs.3. Routers ----------------- iii) Receives a signal and retransmits it at a higher level.4. Gateways -------------- iv) Provide links between two seperate devices but same type LANs.

A. 1-i, 2-iv, 3-ii, 4- iii
B. 1-iii, 2-i, 3-iv, 4-ii
C. 1-ii, 2iv-, 3-iii, 4-i
D. 1-iii, 2-iv, 3-i, 4-ii
Answer» C. 1-ii, 2iv-, 3-iii, 4-i
42.

The private IP address is _________.

A. 192.168.24.43
B. 172.14.15.36
C. 168.192.19.40
D. 12.0.0.1
Answer» B. 172.14.15.36
43.

Consider the following features,I. Load BalancingII. SecurityIII. Easy to configureIV. Supports authenticationWhat is/are the features of OSPF?

A. II, IV
B. II, III
C. I, II, IV
D. I, II, III
Answer» D. I, II, III
44.

Match the following List 1 to List 21. Application Layer --------- i) Repeater or Hub2. Network Layer ------------- ii) Gateway or five layer switch3. Data link Layer ------------ iii) Bridge or two layer switch4. Physical Layer -------------- iv) Routeror three layer switch

A. 1-i, 2-iv, 3-iii, 4-iv
B. 1-ii, 2-iii, 3-i, 4-iv
C. 1-ii, 2-iv, 3-iii, 4-i
D. 1-i, 2-ii, 3-iv, 4-iii
Answer» D. 1-i, 2-ii, 3-iv, 4-iii
45.

Match the following List 1 to List 21. Label --------------- i) 3 bit2. QoS ----------------- ii) 1 bit3. S-field -------------- iii) 8 bit4. TTL ------------------ iv) 20 bit

A. 1- ii, 2-iii, 3-iv, 4-i
B. 1-iii, 2-iv, 3-i, 4-ii
C. 1-iv, 2-i, 3-ii, 4-iii
D. 1-i, 2-iv, 3-ii, 4-iii
Answer» D. 1-i, 2-iv, 3-ii, 4-iii
46.

Networking: The period of a signal is 10 ms. What is its frequency in Hertz?

A. 10
B. 100
C. 1000
D. 10000
Answer» C. 1000
47.

Match the following: List I - - - - - - - - - - - - - - - - -List II a. Attenuation - - - - - - - - - - - -i. External energy that corrupts a signal.b. Distortion - - - - - - - - - - -- - -ii. Loss of a signal's energyc. Noise - - - - - - - - - - - - -- - -- iii. Alteration of a signal

A. a-iii, b-ii, c-i
B. a-iii, b-i, c-ii
C. a-ii, b-iii, c-i
D. There is no matching pair.
Answer» D. There is no matching pair.
48.

From the given below options, which has the unit as bits/second

A. Propagation speed
B. Propagation time
C. Throughput
D. None of the above.
Answer» D. None of the above.
49.

Which Layer is not present in TCP/ IP model?

A. Application Layer
B. Internet Layer
C. Transport Layer
D. Presentation Layer
Answer» E.
50.

Go-Back-N and Selective-Repeat Protocols uses

A. sliding window
B. sliding frame
C. sliding packet
D. None of the above.
Answer» B. sliding frame
Previous Next