Which of the following is not valid with reference to Message Passing Interface (MPI)?

MPI - Comm - Size returns the total number of MPI processes in specified communication

MPI can run on any hardware platform

The programming model is a distributed memory model

MPI - Comm - Size returns the total number of MPI processes in specified communication

Which of the followings is the BEST description of Message Passing Interface (MPI)?

Only communicators and not groups are accessible to the programmer only by a "handle"

A specification of a shared memory library

MPI uses objects called communicators and groups to define which collection of processes may communicate with each other

Only communicators and not groups are accessible to the programmer only by a "handle"

A communicator is an ordered set of processes

___________________ initializes each private copy with the corresponding value from the master thread.

Private (OpenMP) and reduction.

62 + Mcqs in Muli-core Architectures and Programming in Computer Science Engineering (CSE) Page 1 McqOptions

1.	When number of switch ports is equal to or larger than number of devices, this simple network is referred to as ______________
A.	Crossbar
B.	Crossbar switch
C.	Switching
D.	Both a and b
Answer» E.

Discussion

2.	Which MIMD systems are best scalable with respect to the number of processors?
A.	Distributed memory computers
B.	ccNUMA systems
C.	nccNUMA systems
D.	Symmetric multiprocessors
Answer» B. ccNUMA systems

Discussion

3.	Alternative way of a snooping-based coherence protocol, is called a ____________
A.	Write invalidate protocol
B.	Snooping protocol
C.	Directory protocol
D.	Write update protocol
Answer» D. Write update protocol

Discussion

4.	Requesting node sending the requested data starting from the memory, and the requestor which has made the only sharing node, known as ________.
A.	Read miss
B.	Write miss
C.	Invalidate
D.	Fetch
Answer» B. Write miss

Discussion

5.	A processor performing fetch or decoding of different instruction during the execution of another instruction is called ______.
A.	Direct interconnects
B.	Indirect interconnects
C.	Pipe-lining
D.	Uniform Memory Access
Answer» D. Uniform Memory Access

Discussion

6.	MPI provides a function ________, for packing data into a buffer of contiguous memory.
A.	MPI_Pack
B.	MPI_UnPack
C.	MPI_Pack Count
D.	MPI_Packed
Answer» B. MPI_UnPack

Discussion

7.	Which of the following is not valid with reference to Message Passing Interface (MPI)?
A.	MPI can run on any hardware platform
B.	The programming model is a distributed memory model
C.	All parallelism is implicit
D.	MPI - Comm - Size returns the total number of MPI processes in specified communication
Answer» D. MPI - Comm - Size returns the total number of MPI processes in specified communication

Discussion

8.	Each node of the tree has an_________________ , that is, the cost of the partial tour.
A.	Euler s method
B.	associated cost
C.	three-dimensional problems
D.	fast function
Answer» B. associated cost

Discussion

9.	An _____________ is a program that finds the solution to an n-body problem by simulating the behavior of the particles.
A.	Two N-Body Solvers
B.	n-body solver
C.	n-body problem
D.	Newton s second law
Answer» C. n-body problem

Discussion

10.	Parallelizing the two n-body solvers using _______________ is very similar to parallelizing them using OpenMP.
A.	thread s rank
B.	function Loopschedule
C.	Pthreads
D.	loop variable
Answer» D. loop variable

Discussion

11.	The run-times of the serial solvers differed from the single-process MPI solvers by ______________.
A.	More than 1%
B.	less than 1%
C.	Equal to 1%
D.	Greater than 1%
Answer» C. Equal to 1%

Discussion

12.	The ____________________ is a pointer to a block of memory allocated by the user program and buffersize is its size in bytes.
A.	tour data
B.	node tasks
C.	actual computation
D.	buffer argument
Answer» C. actual computation

Discussion

13.	_____________ begins by checking on the number of tours that the process has in its stack.
A.	Terminated
B.	Send rejects
C.	Receive rejects
D.	Empty
Answer» B. Send rejects

Discussion

14.	For the reduced n-body solver, a ________________ will best distribute the workload in the computation of the forces.
A.	cyclic distribution
B.	velocity of each particle
C.	universal gravitation
D.	gravitational constant
Answer» B. velocity of each particle

Discussion

15.	________________ takes the data in data to be packed and packs it into contig_buf.
A.	MPI Unpack
B.	MPI_Pack
C.	MPI_Datatype
D.	MPI_Comm
Answer» C. MPI_Datatype

Discussion

16.	The _______________ function when executed by a process other than 0 sends its energy to process 0.
A.	Out of work
B.	No_work_left
C.	zero-length message
D.	request for work
Answer» B. No_work_left

Discussion

17.	The routine ________________ combines data from all processes by adding them in this case and returning the result to a single process.
A.	MPI _ Reduce
B.	MPI_ Bcast
C.	MPI_ Finalize
D.	MPI_ Comm size
Answer» B. MPI_ Bcast

Discussion

18.	The easiest way to create communicators with new groups is with_____________.
A.	MPI_Comm_rank
B.	MPI_Comm_create
C.	MPI_Comm_Split
D.	MPI_Comm_group
Answer» D. MPI_Comm_group

Discussion

19.	_______________ is an object that holds information about the received message, including, for example, it s actually count.
A.	buff
B.	count
C.	tag
D.	status
Answer» E.

Discussion

20.	__________________is the principal alternative to shared memory parallel programming.
A.	Multiple passing
B.	Message passing
C.	Message programming
D.	None of the above
Answer» C. Message programming

Discussion

21.	________________ returns in its second argument the number of processes in the communicator.
A.	MPI_Init
B.	MPI_Comm_size
C.	MPI_Finalize
D.	MPI_Comm_rank
Answer» C. MPI_Finalize

Discussion

22.	The _______________ operation similarly computes an element-wise reduction of vectors, but this time leaves the result scattered among the processes.
A.	Reduce-scatter
B.	Reduce (to-one)
C.	Allreduce
D.	None of the above
Answer» B. Reduce (to-one)

Discussion

23.	Communication functions that involve all the processes in a communicator are called ___________
A.	MPI_Get_count
B.	collective communications
C.	buffer the message
D.	nonovertaking
Answer» C. buffer the message

Discussion

24.	________________may complete even if less than count elements have been received.
A.	MPI_Recv
B.	MPI_Send
C.	MPI_Get_count
D.	MPI_Any_Source
Answer» B. MPI_Send

Discussion

25.	A ___________ is a script whose main purpose is to run some program. In this case, the program is the C compiler.
A.	wrapper script
B.	communication functions
C.	wrapper simplifies
D.	type definitions
Answer» B. communication functions

Discussion

26.	Programs that can maintain a constant efficiency without increasing the problem size are sometimes said to be _______________.
A.	weakly scalable
B.	strongly scalable
C.	send_buf
D.	recv_buf
Answer» C. send_buf

Discussion

27.	The processes exchange partial results instead of using oneway communications. Such a communication pattern is sometimes called a ___________.
A.	butterfly
B.	broadcast
C.	Data Movement
D.	Synchronization
Answer» B. broadcast

Discussion

28.	MPI provides a function, ____________ that returns the number of seconds that have elapsed since some time in the past.
A.	MPI_Wtime
B.	MPI_Barrier
C.	MPI_Scatter
D.	MPI_Comm
Answer» B. MPI_Barrier

Discussion

29.	Parallelism can be used to increase the (parallel) size of the problem is applicable in ___________________.
A.	Amdahl's Law
B.	Gustafson-Barsis's Law
C.	Newton's Law
D.	Pascal's Law
Answer» C. Newton's Law

Discussion

30.	Synchronization is one of the common issues in parallel programming. The issues related to synchronization include the followings, EXCEPT:
A.	Deadlock
B.	Livelock
C.	Fairness
D.	Correctness
Answer» E.

Discussion

31.	Considering to use weak or strong scaling is part of ______________ in addressing the challenges of distributed memory programming.
A.	Splitting the problem
B.	Speeding up computations
C.	Speeding up communication
D.	Speeding up hardware
Answer» C. Speeding up communication

Discussion

32.	Which of the followings is the BEST description of Message Passing Interface (MPI)?
A.	A specification of a shared memory library
B.	MPI uses objects called communicators and groups to define which collection of processes may communicate with each other
C.	Only communicators and not groups are accessible to the programmer only by a "handle"
D.	A communicator is an ordered set of processes
Answer» C. Only communicators and not groups are accessible to the programmer only by a "handle"

Discussion

33.	A collective communication in which data belonging to a single process is sent to all of the processes in the communicator is called a ________________.
A.	Scatter
B.	Gather
C.	Broadcast
D.	Allgather
Answer» D. Allgather

Discussion

34.	_______________ specifies that the iteration of the loop must be executed as they would be in serial program.
A.	Nowait
B.	Ordered
C.	Collapse
D.	for loops
Answer» C. Collapse

Discussion

35.	___________________ initializes each private copy with the corresponding value from the master thread.
A.	Firstprivate
B.	lastprivate
C.	nowait
D.	Private (OpenMP) and reduction.
Answer» B. lastprivate

Discussion

36.	A ______________ construct by itself creates a single program multiple data program, i.e., each thread executes the same code.
A.	Parallel
B.	Section
C.	Single
D.	Master
Answer» B. Section

Discussion

37.	The __________________ of a parallel region extends the lexical extent by the code of functions that are called (directly or indirectly) from within the parallel region.
A.	Lexical extent
B.	Static extent
C.	Dynamic extent
D.	None of the above
Answer» D. None of the above

Discussion

38.	_______________ Function returns the number of threads that are currently active in the parallel section region.
A.	omp_get_num_procs ( )
B.	omp_get_num_threads ( )
C.	omp_get_thread_num ( )
D.	omp_set_num_threads ( )
Answer» C. omp_get_thread_num ( )

Discussion

39.	The ______________ specifies that the iterations of the for loop should be executed in parallel by multiple threads.
A.	Sections construct
B.	for pragma
C.	Single construct
D.	Parallel for construct
Answer» C. Single construct

Discussion

40.	In OpenMP, the collection of threads executing the parallel block the original thread and the new thread is called a ____________
A.	team
B.	executable code
C.	implicit task
D.	parallel constructs
Answer» B. executable code

Discussion

41.	When a thread reaches a _____________ directive, it creates a team of threads and becomes the master of the team.
A.	Synchronization
B.	Parallel
C.	Critical
D.	Single
Answer» C. Critical

Discussion

42.	The signal operation of the semaphore basically works on the basic _______ system call.
A.	continue()
B.	wakeup()
C.	getup()
D.	start()
Answer» C. getup()

Discussion

43.	Use the _________ library function to determine if nested parallel regions are enabled.
A.	Omp_target()
B.	Omp_declare target()
C.	Omp_target data()
D.	omp_get_nested()
Answer» E.

Discussion

44.	Which of the following conditions must be satisfied to solve the critical section problem?
A.	Mutual Exclusion
B.	Progress
C.	Bounded Waiting
D.	All of the mentioned
Answer» E.

Discussion

45.	____________ is a form of parallelization across multiple processors in parallel computing environments.
A.	Work-Sharing Constructs
B.	Data parallelism
C.	Functional Parallelism
D.	Handling loops
Answer» C. Functional Parallelism

Discussion

46.	A ___________ construct must be enclosed within a parallel region in order for the directive to execute in parallel.
A.	Parallel sections
B.	Critical
C.	Single
D.	work-sharing
Answer» E.

Discussion

47.	A minimum of _____ variable(s) is/are required to be shared between processes to solve the critical section problem.
A.	one
B.	two
C.	three
D.	four
Answer» C. three

Discussion

48.	The ____________is implemented more efficiently than a general parallel region containing possibly several loops.
A.	Sections
B.	Parallel Do/For
C.	Parallel sections
D.	Critical
Answer» C. Parallel sections

Discussion

49.	___________ are used for signaling among processes and can be readily used to enforce a mutual exclusion discipline.
A.	Semaphores
B.	Messages
C.	Monitors
D.	Addressing
Answer» B. Messages

Discussion

50.	To ensure difficulties do not arise in the readers writer s problem, _______ are given exclusive access to the shared object.
A.	readers
B.	writers
C.	readers and writers
D.	none of the above
Answer» C. readers and writers

Discussion

Explore topic-wise MCQs in Computer Science Engineering (CSE).

When number of switch ports is equal to or larger than number of devices, this simple network is referred to as ______________

Which MIMD systems are best scalable with respect to the number of processors?

Alternative way of a snooping-based coherence protocol, is called a ____________

Requesting node sending the requested data starting from the memory, and the requestor which has made the only sharing node, known as ________.

A processor performing fetch or decoding of different instruction during the execution of another instruction is called ______.

MPI provides a function ________, for packing data into a buffer of contiguous memory.

Which of the following is not valid with reference to Message Passing Interface (MPI)?

Each node of the tree has an_________________ , that is, the cost of the partial tour.

An _____________ is a program that finds the solution to an n-body problem by simulating the behavior of the particles.

Parallelizing the two n-body solvers using _______________ is very similar to parallelizing them using OpenMP.

The run-times of the serial solvers differed from the single-process MPI solvers by ______________.

The ____________________ is a pointer to a block of memory allocated by the user program and buffersize is its size in bytes.

_____________ begins by checking on the number of tours that the process has in its stack.

For the reduced n-body solver, a ________________ will best distribute the workload in the computation of the forces.

________________ takes the data in data to be packed and packs it into contig_buf.

The _______________ function when executed by a process other than 0 sends its energy to process 0.

The routine ________________ combines data from all processes by adding them in this case and returning the result to a single process.

The easiest way to create communicators with new groups is with_____________.

_______________ is an object that holds information about the received message, including, for example, it s actually count.

__________________is the principal alternative to shared memory parallel programming.

________________ returns in its second argument the number of processes in the communicator.

The _______________ operation similarly computes an element-wise reduction of vectors, but this time leaves the result scattered among the processes.

Communication functions that involve all the processes in a communicator are called ___________

________________may complete even if less than count elements have been received.

A ___________ is a script whose main purpose is to run some program. In this case, the program is the C compiler.

Programs that can maintain a constant efficiency without increasing the problem size are sometimes said to be _______________.

The processes exchange partial results instead of using oneway communications. Such a communication pattern is sometimes called a ___________.

MPI provides a function, ____________ that returns the number of seconds that have elapsed since some time in the past.

Parallelism can be used to increase the (parallel) size of the problem is applicable in ___________________.

Synchronization is one of the common issues in parallel programming. The issues related to synchronization include the followings, EXCEPT:

Considering to use weak or strong scaling is part of ______________ in addressing the challenges of distributed memory programming.

Which of the followings is the BEST description of Message Passing Interface (MPI)?

A collective communication in which data belonging to a single process is sent to all of the processes in the communicator is called a ________________.

_______________ specifies that the iteration of the loop must be executed as they would be in serial program.

___________________ initializes each private copy with the corresponding value from the master thread.

A ______________ construct by itself creates a single program multiple data program, i.e., each thread executes the same code.

The __________________ of a parallel region extends the lexical extent by the code of functions that are called (directly or indirectly) from within the parallel region.

_______________ Function returns the number of threads that are currently active in the parallel section region.

The ______________ specifies that the iterations of the for loop should be executed in parallel by multiple threads.

In OpenMP, the collection of threads executing the parallel block the original thread and the new thread is called a ____________

When a thread reaches a _____________ directive, it creates a team of threads and becomes the master of the team.

The signal operation of the semaphore basically works on the basic _______ system call.

Use the _________ library function to determine if nested parallel regions are enabled.

Which of the following conditions must be satisfied to solve the critical section problem?

____________ is a form of parallelization across multiple processors in parallel computing environments.

A ___________ construct must be enclosed within a parallel region in order for the directive to execute in parallel.

A minimum of _____ variable(s) is/are required to be shared between processes to solve the critical section problem.

The ____________is implemented more efficiently than a general parallel region containing possibly several loops.

___________ are used for signaling among processes and can be readily used to enforce a mutual exclusion discipline.

To ensure difficulties do not arise in the readers writer s problem, _______ are given exclusive access to the shared object.