Explore topic-wise MCQs in Manufacturing Engineering.

This section includes 23 Mcqs, each offering curated multiple-choice questions to sharpen your Manufacturing Engineering knowledge and support exam preparation. Choose a topic below to get started.

1.

The centrifugal casting method, is used for casting articles of __________

A. symmetrical shape about horizontal axis
B. symmetrical shape about vertical axis
C. irregular shape
D. sphere shape
Answer» B. symmetrical shape about vertical axis
Discussion
2.

The melting temperature of non-ferrous alloys, to be casted in a cold chamber die casting machine are of?

A. low melting temperature
B. high melting temperature
C. two eutectic points
D. three eutectic points
Answer» C. two eutectic points
Discussion
3.

Cast iron and steel pipes are produced by __________

A. slush casting
B. investment casting
C. true centrifugal casting
D. die casting
Answer» D. die casting
Discussion
4.

In a hot chamber die casting machine __________

A. melting pot is separate from the machine
B. melting pot is an integral part of the machine
C. melting pot may have any location
D. there is no melting pot in die casting machine
Answer» C. melting pot may have any location
Discussion
5.

In which of the following casting method, the molten metal is poured and allowed to solidify while the mold is revolving?

A. die casting method
B. slush casting method
C. centrifugal casting method
D. investment casting method
Answer» D. investment casting method
Discussion
6.

In permanent mold casting method __________

A. molten metal is poured in a metallic mold, retained in the mold long enough for the outer skin to solidify and finally mold is turned over to remove molten metal still in molten condition
B. molten metal is poured and allowed to solidify while the mold is revolving
C. Molten metal is forced into mold under high pressure
D. none of the mentioned
Answer» E.
Discussion
7.

The directional solidification in casting can be improved by using __________

A. chaplets and riser
B. chills and padding
C. chaplets and padding
D. chills and riser
Answer» E.
Discussion
8.

Which of the following are made of two or more different materials (combining the advantages of each material)?

A. Permanent molds
B. Expendable molds
C. Composite molds
D. Ceramic molds
Answer» D. Ceramic molds
Discussion
9.

Which of the following expandable molds are less heat conductors than metallic molds?

A. metallic
B. nonmetallic
C. composite
D. ceramic
Answer» C. composite
Discussion
10.

Which of the following are made of metals that maintain their strength at high temperatures?

A. Permanent molds
B. Expendable molds
C. Composite molds
D. Ceramic molds
Answer» B. Expendable molds
Discussion
11.

Which of the following are typically made of sand, plaster, ceramics and similar materials and generally are mixed with various binders?

A. Permanent molds
B. Expendable molds
C. Composite molds
D. Ceramic molds
Answer» C. Composite molds
Discussion
12.

CAST_IRON_AND_STEEL_PIPES_ARE_PRODUCED_BY?$

A. slush casting
B. investment casting
C. true centrifugal casting
D. none of the mentioned
Answer» D. none of the mentioned
Discussion
13.

In a cold chamber die casting machine, only non-ferrous alloys with ___________ are casted.$

A. low melting temperature
B. high melting temperature
C. all of the mentioned
D. none of the mentioned
Answer» C. all of the mentioned
Discussion
14.

Which_of_the_following_statement_is_wrong?$

A. The hot chamber die casting machine is used for casting zinc, tin, lead and other low melting alloys
B. The cold chamber die casting machine is used for casting aluminum, magnesium, copper base alloys and other high melting alloys
C. The castings produced by centrifugal casting method have open and coarse grained structure
D. None of the mentioned
Answer» D. None of the mentioned
Discussion
15.

The_centrifugal_casting_method,_is_used_for_casting_articles_of

A. symmetrical shape about vertical axis
B. symmetrical shape about horizontal axis
C. irregular shape
D. none of the mentioned
Answer» B. symmetrical shape about horizontal axis
Discussion
16.

In a hot chamber die casting machin?

A. melting pot is separate from the machine
B. melting pot is an integral part of the machine
C. melting pot may have any location
D. none of the mentioned
Answer» C. melting pot may have any location
Discussion
17.

In a _________ the molten metal is poured and allowed to solidify while the mold is revolving.

A. die casting method
B. slush casting method
C. centrifugal casting method
D. none of the mentioned
Answer» D. none of the mentioned
Discussion
18.

In permanent mold casting method

A. molten metal is poured in a metallic mold, retained in the mold long enough for the outer skin to solidify and finally mold is turned over to remove molten metal still in molten condition
B. molten metal is poured and allowed to solidify while the mold is revolving
C. Molten metal is forced into mold under high pressure
D. none of the mentioned
Answer» E.
Discussion
19.

The directional solidification in casting can be improved by using

A. chills and riser
B. chills and padding
C. chaplets and padding
D. none of the mentioned
Answer» E.
Discussion
20.

___________ which are made of two or more different materials combining the advantages of each material.

A. Permanent molds
B. Expendable molds
C. Composite molds
D. none of the mentioned
Answer» D. none of the mentioned
Discussion
21.

Metal molds are better heat conductors than expendable ___________ molds.

A. metallic
B. nonmetallic
C. composite
D. none of the mentioned
Answer» C. composite
Discussion
22.

_____________ which are made of metals that maintain their strength at high temperatures.

A. Permanent molds
B. Expendable molds
C. Composite molds
D. None of the mentioned
Answer» B. Expendable molds
Discussion
23.

______________ which typically are made of sand, plaster, ceramics, and similar materials and generally are mixed with various binders.

A. Permanent molds
B. Expendable molds
C. Composite molds
D. None of the mentioned
Answer» C. Composite molds
Discussion