

MCQOPTIONS
Saved Bookmarks
This section includes 19 Mcqs, each offering curated multiple-choice questions to sharpen your Prestressed Concrete Structures knowledge and support exam preparation. Choose a topic below to get started.
1. |
A concrete beam is prestressed by a cable carrying an initial prestressing force of 300kn, area is 300mm2. Calculate the percentage of loss of stress due to shrinkage in pretensioned members? |
A. | 6.3% |
B. | 5.3% |
C. | 4% |
D. | 2.3% |
Answer» B. 5.3% | |
2. |
The post tensioned members in dry atmospheric conditions, the shrinkage may be increased by ___________ |
A. | 50% |
B. | 70% |
C. | 30% |
D. | 100% |
Answer» B. 70% | |
3. |
The loss of prestress due to shrinkage is obtained by multiplying ___________ |
A. | Shrinkage strain and modulus of elasticity |
B. | Principal stress and durability of concrete |
C. | Curing and grade of concrete |
D. | Compression and tension |
Answer» B. Principal stress and durability of concrete | |
4. |
After the transfer of prestress, the total residual shrinkage will be larger in case of ___________ |
A. | Pretensioned members |
B. | Post tensioned members |
C. | Chemical tensioned members |
D. | Biological tensioned members |
Answer» B. Post tensioned members | |
5. |
The differential shrinkage between the interior and surface of large members result in ___________ |
A. | Surface gradient |
B. | Strain gradient |
C. | Compatibility gradient |
D. | Stress gradient |
Answer» C. Compatibility gradient | |
6. |
The rate of shrinkage is higher at ___________ |
A. | End |
B. | Surface |
C. | Middle |
D. | Edges |
Answer» C. Middle | |
7. |
The shrinkage of concrete is influenced by ___________ |
A. | Type of cement |
B. | Type of chemical |
C. | Type of admixtures |
D. | Type of retarders |
Answer» B. Type of chemical | |
8. |
The shrinkage of concrete in prestressed members results in ___________ |
A. | Shortening |
B. | Elongation |
C. | Bulking |
D. | Stressing |
Answer» B. Elongation | |
9. |
THE_LOSS_OF_PRESTRESS_DUE_TO_SHRINKAGE_IS_OBTAINED_BY_MULTIPLYING:?$ |
A. | Shrinkage strain and modulus of elasticity |
B. | Principal stress and durability of concrete |
C. | Curing and grade of concrete |
D. | Compression and tension |
Answer» B. Principal stress and durability of concrete | |
10. |
A concrete beam is prestressed by a cable carrying an initial prestressing force of 300kn, area is 300mm2. Calculate the percentage of loss of stress due to shrinkage in pretensioned members?$ |
A. | 6.3% |
B. | 5.3% |
C. | 4% |
D. | 2.3% |
Answer» B. 5.3% | |
11. |
The_post_tensioned_members_in_dry_atmospheric_conditions,_the_shrinkage_may_be_increased_by:$ |
A. | 50% |
B. | 70% |
C. | 30% |
D. | 100% |
Answer» B. 70% | |
12. |
Which of the following Indian standard code is recommended for the loss of prestress due to shrinkage? |
A. | IS: 1445 |
B. | IS: 1343 |
C. | IS: 1210 |
D. | IS: 1550 |
Answer» C. IS: 1210 | |
13. |
After the transfer of prestress, the total residual shrinkage will be larger in case of: |
A. | Pretensioned members |
B. | Post tensioned members |
C. | Chemical tensioned members |
D. | Biological tensioned members |
Answer» B. Post tensioned members | |
14. |
Which curing is adopted in case of pretensioned members to prevent shrinkage? |
A. | Surface curing |
B. | Edge curing |
C. | Moist curing |
D. | Total curing |
Answer» D. Total curing | |
15. |
The differential shrinkage between the interior and surface of large members result in: |
A. | Surface gradient |
B. | Strain gradient |
C. | Compatibility gradient |
D. | Stress gradient |
Answer» C. Compatibility gradient | |
16. |
The rate of shrinkage is higher at: |
A. | End |
B. | Surface |
C. | Middle |
D. | Edges |
Answer» C. Middle | |
17. |
Which of the following is used to reduce shrinkage of concrete? |
A. | High strength concrete |
B. | Admixtures |
C. | Boulders |
D. | Low water cement ratio |
Answer» B. Admixtures | |
18. |
The shrinkage of concrete is influenced by: |
A. | Type of cement |
B. | Type of chemical |
C. | Type of admixtures |
D. | Type of retarders |
Answer» B. Type of chemical | |
19. |
The shrinkage of concrete in prestressed members results in: |
A. | Shortening |
B. | Elongation |
C. | Bulking |
D. | Stressing |
Answer» B. Elongation | |