MCQOPTIONS
Saved Bookmarks
MCQOPTIONS
This section includes 657 Mcqs, each offering curated multiple-choice questions to sharpen your Testing Subject knowledge and support exam preparation. Choose a topic below to get started.
| 1. |
Q: You are connecting an access point and it is set to root. What does extended service set ID mean? |
| A. | That you have more than one access point and they are in the same SSID connected by a distribution system |
| B. | That you have more than one access point and they are in seperate SSIDs connected by a distribution system |
| C. | That you have multiple access points, but they are placed physically in different buildings |
| D. | That you have multiple access points, but one is a repeater access point |
| Answer» B. That you have more than one access point and they are in seperate SSIDs connected by a distribution system | |
| 2. |
Q: You are considering upgrading a Windows NT Workstation 4.0 computer on your network to Windows 2000 Professional. The computer has 12 applications installed in addition to the operating system. All the applications are compatible with Windows 2000. The end user would benefit from the additional features Windows 2000 provides. What action should you take? |
| A. | Upgrade the Windows NT Workstation 4.0 computer to Windows 2000 Server |
| B. | Upgrade the Windows NT Workstation 4.0 computer to Windows 2000 Professional |
| C. | Perform a clean install of Windows 2000 Professional on the Windows NT Workstation 4.0 computer |
| D. | Don't upgrade the Windows NT Workstation 4.0 computer, but install the Directory Service Client on it instead |
| Answer» C. Perform a clean install of Windows 2000 Professional on the Windows NT Workstation 4.0 computer | |
| 3. |
Q: You are in the parking area of a shopping complex. And, suddenly the electricity fails and there is total darkness. You will |
| A. | try and take help from someone around |
| B. | crawl towards your vehicle |
| C. | shout for help |
| D. | wait till the lights come |
| Answer» C. shout for help | |
| 4. |
Q: You are installing Windows 2000 on a computer that already has another operating system installed on it. You choose to install Windows 2000 in a different folder than the previously installed operating system. What will Windows 2000 do? |
| A. | Wireless devices |
| B. | Multiple displays |
| C. | Advanced Power Management (APM) |
| D. | Uninterruptible Power Supplies (UPSs) |
| Answer» D. Uninterruptible Power Supplies (UPSs) | |
| 5. |
Q: You are installing windows 2000 Professional on a computer that is not on a network . When prompted by Windows 2000 Setup during the installation, what should you " Make this computer a member of "? |
| A. | Domain |
| B. | Active Directory domain |
| C. | E-mail group |
| D. | Workgroup |
| Answer» E. | |
| 6. |
Q: You are planning to install and configure network services for ineroperability on your Windows 2000 Server computer. You specifically want this server to maintain and advertise a list of services that use the NWLink IPX/SPX/NetBIOS Compatible Transport Protocol. What service should you install? |
| A. | Indexing Service |
| B. | NNTP Service |
| C. | RIP Listener |
| D. | SAP Agent |
| Answer» E. | |
| 7. |
Q: You are preparing to install Certificate Services for the first time on your Windows 2000 network. You plan to install Certificate Services on a Windows 2000 Server computer that is a member of the domain. You want the certification authority (C |
| A. | to be able to use Active Directory. Which CA type should you select when you install Certificate Services? A) Enterprise root CA |
| B. | Enterprise subordinate CA |
| C. | Stand-alone root CA |
| D. | Enterprise root CA B) Enterprise subordinate CA C) Stand-alone root CA D) |
| Answer» B. Enterprise subordinate CA | |
| 8. |
Q: You are preparing to install Windows 2000 on a computer, and you want this computer to be able to dual boot between Windows 2000 and Windows 98. Which file system should you use? |
| A. | FAT |
| B. | NTFS |
| C. | HPFS |
| D. | You can use either FAT or NTFS |
| Answer» B. NTFS | |
| 9. |
Q: You are preparing to install Windows 2000 server on a new computer at your office. You want to perform an over-the-network installation. Which method will you use to start the installation ? |
| A. | From a CD-ROM drive |
| B. | By using winnt.exe |
| C. | By using winnt32.exe |
| D. | By using a network installation startup disk |
| Answer» C. By using winnt32.exe | |
| 10. |
Q: You are upgrading your single master Windows NT Server 4.0 network to Windows 2000. Which computer should you upgrade first? |
| A. | The stand-alone server in the Windows NT 4.0 domain that will become the root domain in your Windows 2000 network |
| B. | The primary domain controller (PD |
| C. | in the Windows NT 4.0 domain that will become a child domain in your Windows 2000 network C) The backup domain controller (BDC) in the Windows NT 4.0 domain that will become a child domain in your Windows 2000 network |
| D. | The Primary domain controller (PDC) in the Windows NT 4.0 domain that will become the root domain in your Windows 2000 network |
| Answer» E. | |
| 11. |
Q: You are preparing to upgrade a Windows NT Server 4.0 computer to Windows 2000 Server. You recently obtained upgrade packs for several software applications installed on this computer.When should you apply the upgrade packs? |
| A. | Before the upgrade |
| B. | During the upgrade |
| C. | After the upgrade |
| D. | You can install the upgrade pack at any time |
| Answer» C. After the upgrade | |
| 12. |
Q: You are troubleshooting a connectivity problem in your corporate network and want to isolate the problem. You suspect that a router on the route to an unreachable network is at fault. What IOS user exec command should you issue? |
| A. | Router>ping |
| B. | Router>trace |
| C. | Router>show ip route |
| D. | Router>show interface |
| Answer» C. Router>show ip route | |
| 13. |
Q: You are working on a new project to develop a new wireless product with ease - of - use features recommended by customers. It is as yet undetermined which features and the extent to which each feature will be incorporated into the product.You have a focus group that will continue to evaluate the features as the project goes forward.The focus group is authorized to suggest changes, as are your engineers and the quality department.As a project manager, what will help you most to minimize the effect of these changes? |
| A. | A change management plan |
| B. | A scope management plan |
| C. | Do not continue with the project until all of the features are clearly defined in the scope statement and scope definition. |
| D. | This is an expected part of every project. A good project manager will have a communications plan in place to be sure everyone knows what is happening on the project. |
| Answer» C. Do not continue with the project until all of the features are clearly defined in the scope statement and scope definition. | |
| 14. |
Q: You copy a configuration from a network host to a router's RAM. The configuration looks correct, yet it is not working at all. What could the problem be? |
| A. | You copied the wrong configuraion into RAM |
| B. | You copied the configuration into flash memory instead |
| C. | The copy did not override the shutdown command in running-config |
| D. | The IOS became corrupted after the copy command was initiated |
| Answer» D. The IOS became corrupted after the copy command was initiated | |
| 15. |
Q: You create a System Policy file on a Windows 2000 Server computer to manage Windows NT 4.0 client computers (and their users) on your Windows 2000 network. What filename should you assign to this System Policy file? |
| A. | Config.pol |
| B. | Ntconfig.pol |
| C. | Nt4config.pol |
| D. | Winntconfig.pol |
| Answer» C. Nt4config.pol | |
| 16. |
Q: You decide to add a global catalog server to your site. What tool should you use to cause a domain controller to function as a global catalog server? |
| A. | Active Directory Users and Computers |
| B. | Active Directory Sites and Services |
| C. | Network and Dial-up Connections folder |
| D. | The System application |
| Answer» C. Network and Dial-up Connections folder | |
| 17. |
Q: You create a mirrored volume on a Windows 2000 Server computer. What additional item should you create? |
| A. | A new Config.nt file |
| B. | A new Auto exec.nt file |
| C. | A fault tolerance boot disk |
| D. | A set of Windows 2000 Setup Boot Disks |
| Answer» D. A set of Windows 2000 Setup Boot Disks | |
| 18. |
Q: You connect a host to a switch port, but the new host cannot log into the server that is plugged into the same switch. What could the problem be? |
| A. | The router is not configured for the new host |
| B. | The VTP configuration on the switch is not updated for the new host |
| C. | The host has an invalid MAC address |
| D. | The switch port the host is connected to is not configured with the correct VLAN membership |
| Answer» E. | |
| 19. |
Q: You decide to change the file system on your Windows 2000 computer. You want to change drive C: from FAT to NTFS. What should you type at the command prompt? |
| A. | FORMAT C: /FS : NTFS |
| B. | CONVERT C: /FS : NTFS |
| C. | FORMAT C: /NTFS |
| D. | CONVERT C: /NTFS |
| Answer» C. FORMAT C: /NTFS | |
| 20. |
Q: You get a call from a network administrator who tells you that he typed the following into his router: Router (config) #router ospf 1 Router (config-router) # network 10.0.0.0. 255. 0.0.0 area 0 He tells you he still can't see any routes in the routing table. What configuration error did the administrator make? |
| A. | The wildcard mask is incorrect |
| B. | The OSPF area is wrong |
| C. | The OSPF Process ID is incorrect. |
| D. | The AS configuration is wrong |
| Answer» B. The OSPF area is wrong | |
| 21. |
Q: You give me blood, I will give you freedom Whose slogan was that? |
| A. | Subhash Chandra Bose |
| B. | Mahatma Gandhi |
| C. | Shyamlal Gupta Councilor |
| D. | Savarkar |
| Answer» B. Mahatma Gandhi | |
| 22. |
Q: You have recently been promoted to a project manager for a clinical testing facility. The team is developing a new product that will cut down on testing interval requirements for a new seizure management medication. After you become involved with the project, you decide to add more research reports, which the customer did not request. This is an example of |
| A. | Good customer service scope |
| B. | Scope creep |
| C. | Due diligence |
| D. | Gold Plating |
| Answer» E. | |
| 23. |
Q: You have finished physically installing an access point on the ceiling of your office. At a minimum, which parameter must be configured on the access point in order to allow a wireless client to operate on it? |
| A. | AES |
| B. | PSK |
| C. | SSID |
| D. | WEp |
| Answer» D. WEp | |
| 24. |
Q: You have the following binary number :10110111. What are the decimal and hexadecimal equivalents? |
| A. | 69/0x2102 |
| B. | 183/B7 |
| C. | 173/A6 |
| D. | 83/0xC5 |
| Answer» C. 173/A6 | |
| 25. |
Q: You have started your own company based upon PMI methodologies and have been contracted by the government to develope a new interface for one of its computer applications. You develope a solution and win the bid for the contract but encounter problems at the end of the project when the customer says that you did not fullfill their needs. You are throughly shocked. What is your conclusion of the situation? |
| A. | There are always more customers available |
| B. | If the customer is not satisfied, the project is not successful |
| C. | Change control management was not effective |
| D. | The customer did not communicate very well |
| Answer» C. Change control management was not effective | |
| 26. |
Q: You have two switches connected together with two crossover cables for redundancy, and STP is disabled. Which of the following will happen between the switches? |
| A. | The routing tables on the switches will not update |
| B. | The MAC forward/;filter table will not update on the switch |
| C. | Broadcast storms will occur on the switched network |
| D. | The switches will automatically load-balance between the two links |
| Answer» D. The switches will automatically load-balance between the two links | |
| 27. |
Q: You just finished installing the Dynamic Host Configuration Protocol (DHCP) service on a Windows 2000 Server computer that is a domain controller on your network. What must you do before the DHCP service can start? |
| A. | Authorize the DHCP server in Active Directory |
| B. | Configure a scope, a superscope, and a multicast scope |
| C. | Configure a DHCP address reservation |
| D. | Configure the DHCP server for DNS integration |
| Answer» B. Configure a scope, a superscope, and a multicast scope | |
| 28. |
Q: You move a file from an NTFS volume on a Windows 2000 client computer to a folder on an NTFS volume on a Windows 2000 Server computer. What effect does moving this file have on the NTFS permissions assigned to the file? |
| A. | The moved file retains all of its original NTFS permissions |
| B. | The moved file loses all of its original NTFS permissions, and now has no permissions. |
| C. | The moved file loses some of its original NTFS permissions, and inherits some of the NTFS permissions from its destination folder |
| D. | The moved file loses all of its original NTFS permissions, and inherits all of the inheritable NTFS permissions from its destination folder |
| Answer» E. | |
| 29. |
Q: You need the IP address of the devices with which the router has established an adjacency. Also, the retransmit interval and the queue counts for the adjacent routers need to be checked. What command will display the required information? |
| A. | show ip eigrp adjacency |
| B. | show ip eigrp topology |
| C. | show ip eigrp interfaces |
| D. | show ip eigrp neighbors |
| Answer» E. | |
| 30. |
Q: You need to configure a router for a Frame Relay connection to a non-Cisco router. Which of the following commands will prepare the WAN interface of the router for this connection? |
| A. | Router (config-if) #encapsulation frame-relay q933a |
| B. | Router (config - if) #encapsulation frame-relay ansi |
| C. | Router (config - if) #encapsulation frame-relay ietf |
| D. | Router (config - if) #encapsulation frame-relay cisco |
| Answer» D. Router (config - if) #encapsulation frame-relay cisco | |
| 31. |
Q: You need to create an access list that will prevent hosts in the network range of 192.168.160.0 to 192.168.191.0 . Which of the following lists will you use? |
| A. | access - list 10 deny 192.168.160.0 255.255.224.0 |
| B. | access - list 10 deny 192.168.160.0 0.0.191.255 |
| C. | access - list 10 deny 192.168.160.0 0.0.31.255 |
| D. | access - list 10 deny 192.168.0.0 0.0.31.255 |
| Answer» D. access - list 10 deny 192.168.0.0 0.0.31.255 | |
| 32. |
Q: You need to gather the IP address of a remote switch that is located in Hawaii. What can you do to find the address? |
| A. | Issue the show ip route command on the router connected to the switch |
| B. | Issue the show cdp neighbor command on the router connected to the switch |
| C. | Issue the show ip arp command on the router connected to the switch |
| D. | Issue the show cdp neighbors detail command on the router connected to the switch |
| Answer» E. | |
| 33. |
Q: You organise files by storing them in |
| A. | indexes |
| B. | folders |
| C. | archives |
| D. | lists |
| E. | None of these |
| Answer» C. archives | |
| 34. |
Q: You need to stop DoS attacks in real time and have a log of anyone who has tried to attack your network. What should you do your network? |
| A. | Add more routers |
| B. | Use the auto secure command |
| C. | Implement IDS/IPS |
| D. | Configure Naggle |
| Answer» D. Configure Naggle | |
| 35. |
Q: You need to subnet a network that has 5 subnets, each wit at least 16 hosts. Which classful subnet mask would you use? |
| A. | 255.255.255.192 |
| B. | 255.255.255.224 |
| C. | 255.255.255.240 |
| D. | 255.255.255.248 |
| Answer» C. 255.255.255.240 | |
| 36. |
Q: You perform a normal backup for your company once a week. In addition, you want to perform a backup of data each day in between normal backups. You want to minimize the amount of time it takes to perform these backups. Which backup type should you use on the days in between normal backups? |
| A. | Normal |
| B. | Incremental |
| C. | Differential |
| D. | Copy |
| Answer» C. Differential | |
| 37. |
Q: You telnet into a remote device and type debug ip rip, but no output from the debug command is seen. What could the problem be? |
| A. | You must type the show ip rip command first |
| B. | IP addressing on the network is incorrect |
| C. | You must use the terminal monitor command |
| D. | Debug output is sent only to the console. |
| Answer» D. Debug output is sent only to the console. | |
| 38. |
Q: You type Router#sh ru and receive a % ambiguous command error. why did you receive this message? |
| A. | The command requires additional options or parameters |
| B. | There is more than one show command that starts with the letters ru. |
| C. | There is no show command that starts with ru |
| D. | The command is being executed from the wrong router mode |
| Answer» C. There is no show command that starts with ru | |
| 39. |
Q: You use two sites on your Windows 2000 network. You decide you want to manually specify a particular domain controller in each site that will be used for intersite replication. What should you do? |
| A. | Create a site link to connect the two domain controllers |
| B. | Designate the desired domain controller in each site as a bridge-head server |
| C. | Configure the desired domain controller in each site to be a global catalog server |
| D. | Create a new connection object for the desired domain controller in each site |
| Answer» C. Configure the desired domain controller in each site to be a global catalog server | |
| 40. |
Q: You want to add an additional paging file to your Windows 2000 Server computer. Which tool should you use? |
| A. | System |
| B. | Folder Options |
| C. | Windows Explorer |
| D. | Add/Remove Programs |
| Answer» B. Folder Options | |
| 41. |
Q: You want to assign a mandatory user profile to a user. What must you do? |
| A. | Rename the user's NTUSER.DAT file |
| B. | Rename the user's ntuser.ini file |
| C. | Copy the Default User profile folder to the user's profile folder |
| D. | Copy the user's profile folder to the Default User profile folder |
| Answer» B. Rename the user's ntuser.ini file | |
| 42. |
Q: You want to configure a static IP address on a Windows 2000 Server computer on which you want to install the DNS Server service and Active Directory. What tool should you use to configure the static IP address? |
| A. | IPconfig.exe |
| B. | DNS administrative tool |
| C. | Active Directory Users and Computers |
| D. | Network and Dial-up connections folder |
| Answer» E. | |
| 43. |
Q: You want to configure bindings and provider order on a Windows 2000 computer. Which tool should you use? |
| A. | Network and Dial-up Connections folder |
| B. | Windows Explorer |
| C. | System |
| D. | Device Manager |
| Answer» B. Windows Explorer | |
| 44. |
Q: You want to configure synchronization settings for your office files. Which tool should you use? |
| A. | Folder options |
| B. | Scheduled Tasks |
| C. | Windows Explorer |
| D. | System Information |
| Answer» D. System Information | |
| 45. |
Q: You want to create a Group Policy Object (GPO) that will be associated with a specific domain. Which tool should you use? |
| A. | Domain Security Policy |
| B. | Domain Controller Security Policy |
| C. | Active Directory Users and Computers |
| D. | Active Directory Sites and Services |
| Answer» D. Active Directory Sites and Services | |
| 46. |
Q: You want to create and format a simple volume on a Windows 2000 computer. Which tool should you use? |
| A. | Disk Administrator |
| B. | Disk Management |
| C. | The Convert.exe command -line utility |
| D. | The Format.exe command-line utility |
| Answer» C. The Convert.exe command -line utility | |
| 47. |
Q: You want to enable dynamic routing on a Windows 2000 Server computer on your TCP/IP network . You want this computer to manage the propagation of multicast traffic throught your network. Which routing protocol should you use? |
| A. | IGMP Version2, Router and Proxy |
| B. | Open Shortest Path First (OSPF) |
| C. | RIP Version 2 for Internet Protocol |
| D. | Network Address Translation(NAT) |
| Answer» B. Open Shortest Path First (OSPF) | |
| 48. |
Q: You want to implement a mechanism that automates the IP configuration, including IP address, subnet mask, default gateway, and DNS information. Which protocol will you use to accomplish this? |
| A. | SMTP |
| B. | SNMP |
| C. | DHCP |
| D. | ARP |
| Answer» D. ARP | |
| 49. |
Q: You want to implement Active Directory on your Windows 2000 network. Your network consists of Windows 2000 Server computers, Windows 2000 Professional computers, Windows NT Workstation 4.0 computers, and Windows 98 computers. You want to achieve optimum functionality of all the client computers with Active Directory. What should you do? |
| A. | Install the Directory Service Client on all of the Windows 98 computers. |
| B. | Upgrade all of the Windows 98 computers to Windows 2000 Professional |
| C. | Upgrade all of the Windows NT Workstation 4.0 computers and Windows 98 computers to Windows 2000 Professional |
| D. | Nothing. Windows 2000 will automatically detect all client computers and optimize them to function with Active Directory. |
| Answer» D. Nothing. Windows 2000 will automatically detect all client computers and optimize them to function with Active Directory. | |
| 50. |
Q: You want to improve network performance by increasing the bandwidth available to hosts and limit the size of the broadcast domains. Which of the following options will achieve this goal? |
| A. | Managed hubs |
| B. | Bridges |
| C. | Switches |
| D. | Switches configured with VLANs |
| Answer» E. | |