MCQOPTIONS
Saved Bookmarks
MCQOPTIONS
This section includes 657 Mcqs, each offering curated multiple-choice questions to sharpen your Testing Subject knowledge and support exam preparation. Choose a topic below to get started.
| 1. |
Flate plate collector is generally used for |
| A. | Room heating |
| B. | Water heating |
| C. | Lighting |
| D. | All are correct |
| Answer» B. Water heating | |
| 2. |
Lubricant used in gearbox is |
| A. | SAE 30 |
| B. | SAE 40 |
| C. | SAE 90 |
| D. | None of these |
| Answer» D. None of these | |
| 3. |
Heat required to evaporate one kg of water from grain is |
| A. | 450 Kcal |
| B. | 500 Kcal |
| C. | 600 Kcal |
| D. | 656 Kcal |
| Answer» C. 600 Kcal | |
| 4. |
The extra high speed engines used in knapsack sprayers are powered by |
| A. | Kerosene |
| B. | Diesel |
| C. | Petrol |
| D. | Dual fuel |
| Answer» D. Dual fuel | |
| 5. |
A metal with lowest melting point is |
| A. | Aluminium |
| B. | Copper |
| C. | High carbon steel |
| D. | Nickel |
| Answer» B. Copper | |
| 6. |
The temperature at which vapour flashes momentarily is |
| A. | Pour point |
| B. | Flash point |
| C. | Fire point |
| D. | All are correct |
| Answer» C. Fire point | |
| 7. |
Pressure of hand=operated sprayers varies from |
| A. | 1-5 Kg/cm2 |
| B. | 1-6 Kg/cm2 |
| C. | 1-7 Kg/cm2 |
| D. | 1-8 Kg/cm2 |
| Answer» D. 1-8 Kg/cm2 | |
| 8. |
An improper registration of reaper results in |
| A. | Uneven harvesting |
| B. | Excessive clogging of crop |
| C. | Unbalance load |
| D. | All are correct |
| Answer» E. | |
| 9. |
The percentage of total quantity of water in the world that is saline is |
| A. | 67 |
| B. | 75 |
| C. | 88 |
| D. | 97 |
| Answer» E. | |
| 10. |
The percentage of carbon in cast iron is |
| A. | 0.5 to 1.0% |
| B. | 1.5 to 2.0% |
| C. | 2.0 to 2.5% |
| D. | 2.5 to 4.5% |
| Answer» E. | |
| 11. |
Power operated sprayers are suitable for |
| A. | Small holdings |
| B. | Large holdings |
| C. | Medium holdings |
| D. | None of these |
| Answer» C. Medium holdings | |
| 12. |
Solar pond is used to |
| A. | Collect and store the solar energy |
| B. | Reflect the solar energy |
| C. | Divert solar energy |
| D. | None of these |
| Answer» B. Reflect the solar energy | |
| 13. |
The metering mechanism suitable for metering small and large seeds is |
| A. | Fluted roller |
| B. | Cup feed type |
| C. | Cell feed type |
| D. | Internal double run type |
| Answer» E. | |
| 14. |
Optimum engine temperature is about |
| A. | 50?C |
| B. | 62?C |
| C. | 72?C |
| D. | 82?C |
| Answer» E. | |
| 15. |
Ballasting in rear tyre of tractor is done for |
| A. | Increasing traction |
| B. | Reducing tractor vibration |
| C. | Increasing weight of tractor |
| D. | Prevent overturning of tractor |
| Answer» B. Reducing tractor vibration | |
| 16. |
In the bar point share, the bar serves as |
| A. | Share only |
| B. | Landside only |
| C. | Share and landside |
| D. | None of these |
| Answer» D. None of these | |
| 17. |
The hitching of plough is done by placing the plough |
| A. | Few centimeters below ground level |
| B. | On the ground level |
| C. | Few centimeters above ground level |
| D. | None of these |
| Answer» B. On the ground level | |
| 18. |
The grade of oil used in winter season is |
| A. | SAE 30 |
| B. | SAE 90 |
| C. | SAE 110 |
| D. | All are correct |
| Answer» B. SAE 90 | |
| 19. |
Pressure plate is an essential part of |
| A. | Transmission system |
| B. | Clutch |
| C. | Gear reduction |
| D. | None of these |
| Answer» C. Gear reduction | |
| 20. |
The stroke bore ratio of tractor engines varies from |
| A. | 1.0 to 1.5 |
| B. | 1.0 to 1.25 |
| C. | 1.0 to 1.35 |
| D. | 1.0 to 1.45 |
| Answer» E. | |
| 21. |
The optimum C:N ratio for maximum microbiological activities is |
| A. | 10;1 |
| B. | 15;1 |
| C. | 25;1 |
| D. | 30;1 |
| Answer» E. | |
| 22. |
The amount of heat in kilocalorie the must be added to or removed from one kg of substances to change its temperature by one degree is |
| A. | Latent heat |
| B. | Specific heat |
| C. | Enthalpy |
| D. | Entropy |
| Answer» C. Enthalpy | |
| 23. |
V-shaped gullies are developed when |
| A. | Now velocity is high but runoff volume per unit time is less |
| B. | Now velocity is less but runoff volume is more |
| C. | Flow velocity is less |
| D. | Runoff volume is more |
| Answer» B. Now velocity is less but runoff volume is more | |
| 24. |
Bench terraces are constructed at slope gradient of |
| A. | 5 to 10% |
| B. | 10 to 20% |
| C. | Less than 5% |
| D. | All are correct |
| Answer» C. Less than 5% | |
| 25. |
Threshing in rotating drum cylinder is due to |
| A. | Stripping |
| B. | Tearing |
| C. | Impact |
| D. | Rubbing |
| Answer» D. Rubbing | |
| 26. |
In flail type mower, cutting section has |
| A. | Fixed knives |
| B. | Swinging knives |
| C. | Reciprocating knives |
| D. | Rotating knives |
| Answer» C. Reciprocating knives | |
| 27. |
The horizontal suction of MB plough is |
| A. | 5 mm |
| B. | 3 cm |
| C. | 5 cm |
| D. | Above 5 cm |
| Answer» B. 3 cm | |
| 28. |
The particle size of silt according to USWA is |
| A. | >0.002 mm |
| B. | <0.002 mm |
| C. | 0.002 to 0.05 mm |
| D. | 0.25 to 0.5 mm |
| Answer» D. 0.25 to 0.5 mm | |
| 29. |
The size of seed drill expressed by |
| A. | Length and width of machine |
| B. | Area covered per unit time |
| C. | Number of furrow opener x spacing between two furrow openers |
| D. | All are correct |
| Answer» D. All are correct | |
| 30. |
The speed variation of heavy belt drive is about |
| A. | 15-20 m/s |
| B. | 20-22 m/s |
| C. | <22 m/s |
| D. | >22 m/s |
| Answer» E. | |
| 31. |
In dry milling process, the following operations are done prior to oil treatment is |
| A. | Conditioning |
| B. | Pitting |
| C. | Polishing |
| D. | Grading |
| Answer» C. Polishing | |
| 32. |
In diesel engines, fuel injected in the cylinder is through |
| A. | Carburetor |
| B. | Fuel injection pump |
| C. | Fuel injector |
| D. | All are correct |
| Answer» D. All are correct | |
| 33. |
Surface creep is carried out by the action of |
| A. | Rolling and jumping |
| B. | Rolling or sliding |
| C. | Both (a) and (b) |
| D. | None of these |
| Answer» C. Both (a) and (b) | |
| 34. |
The sequence of gears and shafts through which the engine power transmitted to tractor wheel is called |
| A. | Gear system |
| B. | Transmission |
| C. | Both (a) & (b) |
| D. | None of these |
| Answer» C. Both (a) & (b) | |
| 35. |
The work timing gear is to |
| A. | Control the ignition timing |
| B. | Control the fuel injection timing |
| C. | Control the timing of opening and closing of valves |
| D. | All are correct |
| Answer» E. | |
| 36. |
The percentage of healthy grain obtained from all outlets with respect to healthy grains received from main outlet by weight is |
| A. | Blower loss |
| B. | Sieve loss |
| C. | Cylinder |
| D. | Visible loss |
| Answer» C. Cylinder | |
| 37. |
The solar radiation received directly from the sun is |
| A. | Beam radiation |
| B. | Scattered radiation |
| C. | Diffuse radiation |
| D. | Reflected radiation |
| Answer» B. Scattered radiation | |
| 38. |
Leakage factor is the property of |
| A. | Confined aquifer |
| B. | Semi-confined aquifer |
| C. | Unconfined aquifer |
| D. | All are correct |
| Answer» C. Unconfined aquifer | |
| 39. |
The pressure of water in confined aquifer is |
| A. | Above atmospheric pressure |
| B. | At atmospheric pressure |
| C. | Below atmospheric pressure |
| D. | All are correct |
| Answer» B. At atmospheric pressure | |
| 40. |
Volumetric efficiency of air-cooled engines in comparison to water-cooled engines is |
| A. | Higher |
| B. | Lower |
| C. | Equal |
| D. | None of these |
| Answer» C. Equal | |
| 41. |
The mowers are designed to cut |
| A. | Wheat |
| B. | Paddy |
| C. | Mustard |
| D. | Grasses |
| Answer» B. Paddy | |
| 42. |
A machine used to cut crops and deliver them in a uniform manner in a row is |
| A. | Combine |
| B. | Mower |
| C. | Reaper binder |
| D. | Windrower |
| Answer» E. | |
| 43. |
In anaerobic digestion, biogas production by bacterial decomposition is |
| A. | Presence of oxygen |
| B. | Absence of oxygen |
| C. | Presence of CO2 |
| D. | Absence of CO2 |
| Answer» C. Presence of CO2 | |
| 44. |
The ratio of reel peripheral speed to forwards speed of combine is termed as |
| A. | Reel velocity |
| B. | Reel index |
| C. | Reel diameter |
| D. | Reel speed |
| Answer» C. Reel diameter | |
| 45. |
The lines on a map through places having equal depth of evapotranspiration is called |
| A. | Isohyets |
| B. | Isobar |
| C. | Isopleths |
| D. | None of these |
| Answer» D. None of these | |
| 46. |
Traction coefficient is maximum in a field when |
| A. | It is dry |
| B. | It is cultivated |
| C. | It is irrigated |
| D. | All are correct |
| Answer» B. It is cultivated | |
| 47. |
The six-cylinder engine with possible number of firing orders is |
| A. | 6 |
| B. | 4 |
| C. | 3 |
| D. | 2 |
| Answer» C. 3 | |
| 48. |
Suitable lubricant for 2-stroke engines is |
| A. | Crude petroleum lubricant |
| B. | Vegetable lubricant |
| C. | Mineral lubricant |
| D. | None of these |
| Answer» D. None of these | |
| 49. |
In the cylinder sorter, the inclination of cylinder for dry granular material is kept up to |
| A. | 75 mm/mb |
| B. | 100 mm/m |
| C. | 125 mm/m |
| D. | 150 mm/m |
| Answer» D. 150 mm/m | |
| 50. |
When the soil moisture and rainfall are inadequate during the growing season to support healthy crop growth to maturity is called |
| A. | Metrological drought |
| B. | Hydrological drought |
| C. | Agricultural drought |
| D. | None of these |
| Answer» D. None of these | |