MCQOPTIONS
Saved Bookmarks
MCQOPTIONS
This section includes 657 Mcqs, each offering curated multiple-choice questions to sharpen your Testing Subject knowledge and support exam preparation. Choose a topic below to get started.
| 1. |
The optimum value of reel index for minimum cutter bar loss is |
| A. | 1 to 2 |
| B. | 1.25 to 1.5 |
| C. | 2 to 3 |
| D. | 2.25 to 3.5 |
| Answer» C. 2 to 3 | |
| 2. |
A critical moisture content varies with |
| A. | Rate of drying |
| B. | Thickness of material |
| C. | Both (a) and (b) |
| D. | None of these |
| Answer» D. None of these | |
| 3. |
Spur and helical gears transmit power between two |
| A. | Parallel shafts |
| B. | Parallel shafts with intersecting axis |
| C. | Both (a) & (b) |
| D. | None of these |
| Answer» B. Parallel shafts with intersecting axis | |
| 4. |
Puddling is done to achieve |
| A. | Soft soil bed |
| B. | Non-leaching of water |
| C. | Size reduction of clods |
| D. | Conservation of moisture |
| Answer» C. Size reduction of clods | |
| 5. |
The method of ploughing in which the plough works round the strip of ploughed land is |
| A. | Gathering |
| B. | Casting |
| C. | Head land |
| D. | None of these |
| Answer» B. Casting | |
| 6. |
In rasp-bar type cylinder, the bars varies from |
| A. | 4?6 |
| B. | 6?8 |
| C. | 8?10 |
| D. | 10?12 |
| Answer» C. 8?10 | |
| 7. |
Brake fluid used in hydraulic brake is a mixture of |
| A. | Glycerin and alcohol |
| B. | Alcohol and methane |
| C. | Glycerin and methane |
| D. | None of these |
| Answer» B. Alcohol and methane | |
| 8. |
The firing interval of 4-stroke engine is determined by |
| A. | 180?/No. of cylinder |
| B. | 270?/No. of cylinder |
| C. | 360?/No. of cylinder |
| D. | 720?/No. of cylinder |
| Answer» E. | |
| 9. |
Detonation refers to the |
| A. | Engine knocking |
| B. | Engine speed |
| C. | Engine efficiency |
| D. | All are correct |
| Answer» B. Engine speed | |
| 10. |
The cutting platform of combine operated at height above ground is |
| A. | 6.5-8 cm |
| B. | 7.5-9 cm |
| C. | 8.5-11 cm |
| D. | 9.5-12 cm |
| Answer» C. 8.5-11 cm | |
| 11. |
Primary winding of ignition coil consists of |
| A. | Thin wire |
| B. | Thick wire |
| C. | Steel wire |
| D. | All are correct |
| Answer» C. Steel wire | |
| 12. |
The useful life of tractor is |
| A. | 8,000 hours |
| B. | 10,000 hours |
| C. | 12,000 hours |
| D. | 15,000 hours |
| Answer» C. 12,000 hours | |
| 13. |
According to colling, the draft of MB plough due to furrow slice is |
| A. | 34% |
| B. | 48% |
| C. | 68% |
| D. | Above 68% |
| Answer» B. 48% | |
| 14. |
Compression ratio of diesel engine is |
| A. | 4;1 |
| B. | 6;1 |
| C. | 15;1 |
| D. | 25;1 |
| Answer» B. 6;1 | |
| 15. |
Capacity of battery is expressed in tenns of |
| A. | Amp power |
| B. | Voltage |
| C. | Amp-hour |
| D. | None of these |
| Answer» D. None of these | |
| 16. |
The velocity of flow in open channel is determined by |
| A. | Darcy's formula |
| B. | Manning's formula |
| C. | Both (a) and (b) |
| D. | None of these |
| Answer» B. Manning's formula | |
| 17. |
A spring mass damper system vibrates with |
| A. | 5 degree of freedom |
| B. | 6 degree of freedom |
| C. | 7 degree of freedom |
| D. | 8 degree of freedom |
| Answer» C. 7 degree of freedom | |
| 18. |
For sowing mustard seeds, the most suitable seed drill is |
| A. | Plain seed drill |
| B. | Pneumatic seed drill |
| C. | Zero till drill |
| D. | All are correct |
| Answer» C. Zero till drill | |
| 19. |
In tractor engines, a commonly used thermostat valve is |
| A. | Bimetallic type |
| B. | Bellows types |
| C. | Both (a) & (b) |
| D. | None of these |
| Answer» D. None of these | |
| 20. |
The total swept volume of all pistons during power strokes occurring in one minute is |
| A. | Piston volume |
| B. | Clearance volume |
| C. | Displacement volume |
| D. | None of these |
| Answer» D. None of these | |
| 21. |
The width of cut of animal drawn reaper is |
| A. | 500 mm |
| B. | 600 mm |
| C. | 800 mm |
| D. | 900 mm |
| Answer» E. | |
| 22. |
The wet process of biomass digestion involves |
| A. | Pyrolysis and Gasification |
| B. | Hydrogenation and liquefication |
| C. | Liquenfication and pyrolysis |
| D. | Anaerobic digestion and fermentation |
| Answer» E. | |
| 23. |
The minimum soil manipulation is essential for crop production in |
| A. | No tillage |
| B. | Minimum tillage |
| C. | Strip tillage |
| D. | Reduced tillage |
| Answer» C. Strip tillage | |
| 24. |
Generally tractor speed in the top gear varies from |
| A. | 12-18 kmph |
| B. | 12-25 kmph |
| C. | 18-24 kmph |
| D. | All are correct |
| Answer» D. All are correct | |
| 25. |
The main function of potato digger elevator is |
| A. | Digging of potatoes |
| B. | Windrowing of potatoes |
| C. | Both (a) & (b) |
| D. | None of these |
| Answer» D. None of these | |
| 26. |
PTO shaft drive taken from engine transmission the speed of PTO will be |
| A. | Directly proportional to engine speed |
| B. | Inversely proportional to engine speed |
| C. | Both (a) & (b) |
| D. | None of these |
| Answer» C. Both (a) & (b) | |
| 27. |
The percentage of carbon in medium carbon varies from |
| A. | 0.1 to 0.25% |
| B. | 0.12 to 0.3 % |
| C. | 0.25 to 0.5 % |
| D. | 0.5 to 0.75 % |
| Answer» D. 0.5 to 0.75 % | |
| 28. |
What the stroke: bore rati of an engine increases, the volumetric efficiency of the engine |
| A. | Decreases |
| B. | Increases |
| C. | Remains unchanged |
| D. | None of these |
| Answer» B. Increases | |
| 29. |
Variation in engine speed at full load and no load is called |
| A. | Pressure drop |
| B. | Speed drop |
| C. | Pressure hike |
| D. | Speed hike |
| Answer» C. Pressure hike | |
| 30. |
Farm tractor is |
| A. | Prime mover |
| B. | Traction engine |
| C. | Both (a) & (b) |
| D. | None of these |
| Answer» D. None of these | |
| 31. |
Chute spillways are used at |
| A. | Mild slope |
| B. | Steep slope |
| C. | Both (a) & (b) |
| D. | None of these |
| Answer» C. Both (a) & (b) | |
| 32. |
An open channel flow in which flow characteristic at any poi8nt do not change with |
| A. | Steady flow |
| B. | Unsteady flow |
| C. | Uniform flow |
| D. | Non-uniform flow |
| Answer» B. Unsteady flow | |
| 33. |
Tractor mounted groundnut digger shaker is driven by |
| A. | Tractor hydraulic |
| B. | Belt pulley |
| C. | Tractor PTO |
| D. | None of these |
| Answer» D. None of these | |
| 34. |
The size of cutter bar of tractor PTO operated combine is |
| A. | 1.1 m |
| B. | 1.5-2.5 m |
| C. | 2.4 m |
| D. | 4-6 m |
| Answer» C. 2.4 m | |
| 35. |
A draft required to pull 4-botton 30 cm tractor plough working to a depth of 15 cm operated at speed of 6 Km/h. The soil resistance is 0.7 kg/cm2 |
| A. | 12.6 kg |
| B. | 126 kg |
| C. | 1260 kg |
| D. | None of these |
| Answer» D. None of these | |
| 36. |
Tractor front mounted reaper is operated at a forward speed of |
| A. | 1.5 km/h |
| B. | 2.0 km/h |
| C. | 2.5 km/h |
| D. | 3.0 km/h |
| Answer» E. | |
| 37. |
Flow-duration curve is plot of |
| A. | Discharge versus time in chronological order |
| B. | Stream discharge against per cen of time the flow is equaled or exceeded |
| C. | Accumulated flow versus time |
| D. | None of these |
| Answer» C. Accumulated flow versus time | |
| 38. |
The amount of heat required to raise the temperature of a given mass substance by unit is |
| A. | Thermal conductivity |
| B. | Specific heat |
| C. | Heat capacity |
| D. | None of these |
| Answer» D. None of these | |
| 39. |
Flow mass curve is a plot of |
| A. | Cumulative flow versus time |
| B. | Cumulative discharge volume again t time in chronological order |
| C. | Both (a) and (b) |
| D. | None of these |
| Answer» C. Both (a) and (b) | |
| 40. |
Ratio of mass density of substance at certain temperature to the mass density of water at same temperature is called |
| A. | Specific gravity |
| B. | Density |
| C. | Specific weight |
| D. | None of these |
| Answer» B. Density | |
| 41. |
Mass density increases as |
| A. | Pressure increase |
| B. | Pressure decrease |
| C. | Temperature increase |
| D. | Temperature decreases |
| Answer» B. Pressure decrease | |
| 42. |
In comparison to raw rice is parboiled rice rich in |
| A. | Protein |
| B. | Vitamin |
| C. | Minerals |
| D. | All are correct |
| Answer» E. | |
| 43. |
Compared to raw rice, parboiled rice needs |
| A. | Less polishing |
| B. | More polishing |
| C. | Doesn't need polishing |
| D. | None of these |
| Answer» B. More polishing | |
| 44. |
Cooking quality of rice is represented by |
| A. | Time of cooking |
| B. | Swelling capacity and expansion ratio |
| C. | Gruel quality and pastiness |
| D. | All are correct |
| Answer» E. | |
| 45. |
A white shiny talc powder and glucose solution is added to the rice during |
| A. | Polishing |
| B. | Glazing |
| C. | Whitening |
| D. | Hulling |
| Answer» C. Whitening | |
| 46. |
In comparison to raw rice bran, parboiled rice bran contains |
| A. | Less starch and more oil |
| B. | More starch and less oil |
| C. | More starch and more oil |
| D. | Less starch and less oil |
| Answer» B. More starch and less oil | |
| 47. |
Rice yield can be increased with improved mechanical drying method by |
| A. | 1% |
| B. | 1.50% |
| C. | 2% |
| D. | 3% |
| Answer» D. 3% | |
| 48. |
In case of parboiled rice, the average yield obtained from huller is |
| A. | 58-60% |
| B. | 62-64% |
| C. | 64-68% |
| D. | 68-70% |
| Answer» C. 64-68% | |
| 49. |
Mineral lubricants are obtained from |
| A. | Castor and cotton seed oil |
| B. | Crude petroleum |
| C. | Both (a) & (b) |
| D. | None of these |
| Answer» C. Both (a) & (b) | |
| 50. |
Petroleum lubricants are less expensive and suitable for |
| A. | Steam engines |
| B. | IC engines |
| C. | Both (a) & (b) |
| D. | None of these |
| Answer» C. Both (a) & (b) | |