MCQOPTIONS
Saved Bookmarks
MCQOPTIONS
This section includes 657 Mcqs, each offering curated multiple-choice questions to sharpen your Testing Subject knowledge and support exam preparation. Choose a topic below to get started.
| 1. |
The diesel engine does not have |
| A. | Carburettor |
| B. | Spark plug |
| C. | Ignition coil |
| D. | All are correct |
| Answer» E. | |
| 2. |
The thermal efficiency of diesel engine varies between |
| A. | 25 and 32 per cent |
| B. | 32 and 38 per cent |
| C. | 32 and 40 per cent |
| D. | 40 and 45 per cent |
| Answer» C. 32 and 40 per cent | |
| 3. |
Rietz mill is applicable for milling |
| A. | Dry material |
| B. | Semi-dry material |
| C. | Wet material |
| D. | All are correct |
| Answer» D. All are correct | |
| 4. |
The hoe type furrow openers work well in |
| A. | Trashy soils |
| B. | Sticky soils |
| C. | Root infested soil |
| D. | All are correct |
| Answer» D. All are correct | |
| 5. |
The friction forces existing between the surfaces in relative motion is called |
| A. | Static friction |
| B. | Coefficient of friction |
| C. | Kinetic friction |
| D. | Angle of internal friction |
| Answer» D. Angle of internal friction | |
| 6. |
The teeth on the crankshaft gear is |
| A. | Half to camshaft gear |
| B. | Equal to camshaft gear |
| C. | Double of camshaft gear |
| D. | Four times camshaft gear |
| Answer» B. Equal to camshaft gear | |
| 7. |
Secondary winding consist of |
| A. | 10000-15000 turns |
| B. | 15000-2000 turns |
| C. | 15000-25000 turns |
| D. | None of these |
| Answer» C. 15000-25000 turns | |
| 8. |
Crushing law was proposed by |
| A. | Rittinger |
| B. | Kick |
| C. | Bond |
| D. | None of these |
| Answer» B. Kick | |
| 9. |
Evaporation from water bodies and soil masses together with the transpiration from vegetation is termed as |
| A. | Evapotranspiration |
| B. | Water loss |
| C. | Total loss or total evaporation |
| D. | All are correct |
| Answer» E. | |
| 10. |
Flooding nozzles have spray angle of |
| A. | 30-45 degree |
| B. | 60-90 degree |
| C. | 90-120 degree |
| D. | 100-150 degree |
| Answer» E. | |
| 11. |
The particle size of clay according to USWA is |
| A. | 0.002 mm |
| B. | <0.002 mm |
| C. | 0.002 to 0.05 mm |
| D. | 0.5 to 1.0 mm |
| Answer» C. 0.002 to 0.05 mm | |
| 12. |
The size of disc harrow is determined by |
| A. | Maximum width of cut |
| B. | Maximum depth of cut |
| C. | Number of disc |
| D. | Number of gangs |
| Answer» B. Maximum depth of cut | |
| 13. |
In dry milling of pulses with seed oil treatment, oils is used at a rate of |
| A. | 0.5 to 1.5 kg/tonne |
| B. | 1.5 to 2.5 kg/tonne |
| C. | 2.5 to 3.5 kg/tonne |
| D. | 3.5 to 1.5 kg/tonne |
| Answer» C. 2.5 to 3.5 kg/tonne | |
| 14. |
The first IC engine was invented in the year |
| A. | 1876 |
| B. | 1890 |
| C. | 1900 |
| D. | 1905 |
| Answer» B. 1890 | |
| 15. |
The ratio of the overall surface area of the ground product to overall surface area of the feed is called |
| A. | Grinding efficiency |
| B. | Coefficient of grinding |
| C. | Degree of grinding |
| D. | Milling efficiency |
| Answer» D. Milling efficiency | |
| 16. |
The spacing between two adjacent discs in Olpad thresher is |
| A. | 5 cm |
| B. | 10 cm |
| C. | 15 cm |
| D. | 20 cm |
| Answer» D. 20 cm | |
| 17. |
The capacity of kothar type storage structure varies from |
| A. | 5 to 15 tonnes |
| B. | 7 to 25 tonnes |
| C. | 9 to 35 tonnes |
| D. | 10 to 40 tonnes |
| Answer» D. 10 to 40 tonnes | |
| 18. |
drag link is component of |
| A. | Clutch system |
| B. | Fuel supply system |
| C. | Transmission system |
| D. | Streering system |
| Answer» E. | |
| 19. |
The expected annual life of harrow is |
| A. | 8 years |
| B. | 10 years |
| C. | 12 years |
| D. | 14 years |
| Answer» C. 12 years | |
| 20. |
Fluidized bed separator used to separate the seed is |
| A. | Lighter seeds |
| B. | Medium seeds |
| C. | Heavier seeds |
| D. | All kinds of seeds |
| Answer» B. Medium seeds | |
| 21. |
Ocean waves contain |
| A. | Kinetic energy |
| B. | Potential energy |
| C. | Static energy |
| D. | All are correct |
| Answer» E. | |
| 22. |
The detonation of fuel takes place during |
| A. | Combustion |
| B. | Injection |
| C. | Exhaust |
| D. | None of these |
| Answer» B. Injection | |
| 23. |
V' pocket (vetch) type disc separator is used for separation |
| A. | Oblong shape material |
| B. | Irregular shape material |
| C. | Round shape material |
| D. | All are correct |
| Answer» D. All are correct | |
| 24. |
The period petween start of injection and ignition is called |
| A. | Ignition period |
| B. | Injection time |
| C. | Ignition delay |
| D. | All are correct |
| Answer» D. All are correct | |
| 25. |
Of the following, which is the form of precipitation? |
| A. | Rainfall |
| B. | Snowfall |
| C. | Hail |
| D. | All are correct |
| Answer» E. | |
| 26. |
In hydraulic sprayers, the degree of atomization is primarily a function of |
| A. | Air velocity |
| B. | Size of nozzle |
| C. | Size and shape of atomizer |
| D. | Liquid pressure and the nozzle characteristics |
| Answer» E. | |
| 27. |
In attrition mill, the size of food grains is reduced due to |
| A. | Impact and shear |
| B. | Shear and crushing |
| C. | Impact and crushing |
| D. | Impact only |
| Answer» C. Impact and crushing | |
| 28. |
In angle bar cylinder type thresher the clearance between cylinder and concave unit at entrance is |
| A. | 7-13 mm |
| B. | 13-19 mm |
| C. | 15-20 mm |
| D. | 20-25 mm |
| Answer» C. 15-20 mm | |
| 29. |
The governor is used on tractor engine is called |
| A. | Constant speed governor |
| B. | Variable speed governor |
| C. | Both (a) & (b) |
| D. | None of these |
| Answer» C. Both (a) & (b) | |
| 30. |
In spark ignition engines fuel is ignited by |
| A. | Battery ignition system |
| B. | Magneto ignition system |
| C. | Both (a) & (b) |
| D. | None of these |
| Answer» D. None of these | |
| 31. |
The useful working hours of mounted type combine is |
| A. | 1000 |
| B. | 1200 |
| C. | 1800 |
| D. | 2000 |
| Answer» E. | |
| 32. |
In ignition system, magneto is used for |
| A. | Supply of fuel |
| B. | Supply of spark |
| C. | Supply of air fuel mixture |
| D. | Supply of air |
| Answer» C. Supply of air fuel mixture | |
| 33. |
In a windmill, tip speed ratio increases with |
| A. | Increase of number of blades |
| B. | Decrease of number of blades |
| C. | Independent of blade number |
| D. | None of these |
| Answer» C. Independent of blade number | |
| 34. |
Single plate clutch is also known as |
| A. | Single disk clutch |
| B. | Double disk clutch |
| C. | Dog clutch |
| D. | All are correct |
| Answer» B. Double disk clutch | |
| 35. |
In airplane sprayer, the tank capacity ranges between |
| A. | 450-1000 liters |
| B. | 450-1500 litres |
| C. | 450-1800 litres |
| D. | 450-2200 litres |
| Answer» E. | |
| 36. |
Venturi tube is provided in carburet or for |
| A. | Producing low pressure |
| B. | Producing high pressure |
| C. | Both (a) & (b) |
| D. | None of these |
| Answer» B. Producing high pressure | |
| 37. |
Erosion is the interaction |
| A. | Erosivity and rainfall intensity |
| B. | Erodibility and land use |
| C. | Erosivity and erodibility |
| D. | None of these |
| Answer» D. None of these | |
| 38. |
At steep slope the depth of flow is |
| A. | Less than the flat surface |
| B. | More than the flat surface |
| C. | Same flow depth |
| D. | None of these |
| Answer» B. More than the flat surface | |
| 39. |
For engine bearings, a type of lubrication system adopted is |
| A. | Gravity feed lubrication |
| B. | Wick lubrication |
| C. | Ring lubrication |
| D. | All are correct |
| Answer» E. | |
| 40. |
A subsoiler is used to break a hard pan of soil upto a depth of |
| A. | 15 cm |
| B. | 20 cm |
| C. | 30 cm |
| D. | 100 cm |
| Answer» E. | |
| 41. |
The true point of hitch of the implement is called |
| A. | Line of pull |
| B. | Centre of pull |
| C. | Centre of resistance |
| D. | All are correct |
| Answer» C. Centre of resistance | |
| 42. |
The shelling of paddy in rubber roll sheller is due to |
| A. | Rubbing |
| B. | Crushing |
| C. | Shearing |
| D. | All are correct |
| Answer» D. All are correct | |
| 43. |
Unit injector is also known as |
| A. | Nozzle |
| B. | Atomizer |
| C. | Fuel valve |
| D. | All are correct |
| Answer» C. Fuel valve | |
| 44. |
Turbocharger of an engine is driven by |
| A. | Dynamo |
| B. | PTO shaft |
| C. | Exhaust gas |
| D. | Air |
| Answer» D. Air | |
| 45. |
The internal angle between the gangs of single action disc harrow is |
| A. | Less than 90? |
| B. | Exactly 90? |
| C. | More than 90? |
| D. | None of above |
| Answer» D. None of above | |
| 46. |
The coulter of MB plough is generally mounted |
| A. | Above share point |
| B. | Little ahead of share point |
| C. | Both (a) & (b) |
| D. | None of these |
| Answer» D. None of these | |
| 47. |
In case of porosity the volume of pores may change |
| A. | With volume change of voids |
| B. | With volume change of solids |
| C. | Without volume change of solids |
| D. | All are correct |
| Answer» D. All are correct | |
| 48. |
The useful life of self-propelled combine is |
| A. | 5 years |
| B. | 6 years |
| C. | 8 years |
| D. | 10 years |
| Answer» C. 8 years | |
| 49. |
The specific gravity of petrol at 15? is |
| A. | 0.73 |
| B. | 0.82 |
| C. | 0.9 |
| D. | 0.85 |
| Answer» B. 0.82 | |
| 50. |
Wind due to its motion possesses the |
| A. | Potential energy |
| B. | Kinetic energy |
| C. | Chemical energy |
| D. | Electrical energy |
| Answer» C. Chemical energy | |