MCQOPTIONS
Saved Bookmarks
MCQOPTIONS
This section includes 657 Mcqs, each offering curated multiple-choice questions to sharpen your Testing Subject knowledge and support exam preparation. Choose a topic below to get started.
| 1. |
In reaper, lead generally recommended for alignment purpose is of |
| A. | 1 cm per metre length |
| B. | 1.25 cm per metre length |
| C. | 2 cm per metre length |
| D. | 2.5 cm per metre length |
| Answer» D. 2.5 cm per metre length | |
| 2. |
Heat flow in the ground is measured in bore holes to a depth of about |
| A. | 25 metres |
| B. | 50 metres |
| C. | 75 metres |
| D. | 100 metres |
| Answer» E. | |
| 3. |
Lublication reduces |
| A. | Wear between two rubbing surfaces |
| B. | Friction effect in moving parts |
| C. | Heat from moving part |
| D. | All are correct |
| Answer» E. | |
| 4. |
The rack loss should remain between |
| A. | 0.2-0.4 % |
| B. | 0.6-1.0% |
| C. | Above 1.0 |
| D. | None of these |
| Answer» B. 0.6-1.0% | |
| 5. |
A gear used in steering system is |
| A. | Helical gear |
| B. | Spiral gear |
| C. | Spur gear |
| D. | Warm gear |
| Answer» E. | |
| 6. |
A two-way plough left field nearly level for |
| A. | Drainage and Irrigation |
| B. | Runoff and Erosion |
| C. | Both (a) & (b) |
| D. | None of these |
| Answer» B. Runoff and Erosion | |
| 7. |
General formula of armatics is |
| A. | Cn H2n-2 |
| B. | Cn H2n-6 |
| C. | Cn H2n+2 |
| D. | Cn H2n-4 |
| Answer» C. Cn H2n+2 | |
| 8. |
Traction can be be increased by |
| A. | Rubber tyre with grooves |
| B. | Placing chain |
| C. | Putting Luigs |
| D. | All are correct |
| Answer» E. | |
| 9. |
A cultivar wholw tynes swings back when obstacle encounter is |
| A. | Spike tooth cultivator |
| B. | Spring type cultivator |
| C. | Rigid type cultivator |
| D. | All are correct |
| Answer» C. Rigid type cultivator | |
| 10. |
For biological materials, the relationship between EMC and RH has been given by |
| A. | Janssen |
| B. | Rankine |
| C. | Henderson |
| D. | Chung fast |
| Answer» D. Chung fast | |
| 11. |
The compression ratio of petrol engine is |
| A. | 4 to 8:1 |
| B. | 4 to 10:1 |
| C. | 8 to 15:1 |
| D. | 14 to 2:1 |
| Answer» B. 4 to 10:1 | |
| 12. |
Ignition circuit gets current from the |
| A. | Spark plug |
| B. | Battery |
| C. | Alternator |
| D. | All are correct |
| Answer» C. Alternator | |
| 13. |
The actual area irrigated in a year from outlet is |
| A. | Irrigation period |
| B. | Intensity of irrigation |
| C. | Irrigation frequency |
| D. | None of these |
| Answer» C. Irrigation frequency | |
| 14. |
Wet dusting is beneficial for |
| A. | Drought area |
| B. | Semi-arid area |
| C. | Low rainfall areas |
| D. | Heavy rainfall areas |
| Answer» B. Semi-arid area | |
| 15. |
In batch type dryer, the maximum depth of grain is about |
| A. | 200 cm |
| B. | 225 cm |
| C. | 250 cm |
| D. | 300 cm |
| Answer» D. 300 cm | |
| 16. |
The term turrel is associated with |
| A. | Sickle |
| B. | Reaper |
| C. | Mower |
| D. | Combine |
| Answer» B. Reaper | |
| 17. |
A single piece share with curved cutting edge is |
| A. | Slip nose share |
| B. | Bar point share |
| C. | Shin shared |
| D. | Slip share |
| Answer» E. | |
| 18. |
The area of land draining into a watercourse at a given location is known as |
| A. | The Catchments area |
| B. | Drainage area |
| C. | Drainage basin |
| D. | All are correct |
| Answer» E. | |
| 19. |
The moisture content for safe storage corn is about |
| A. | 10 per cent |
| B. | 13 per cent |
| C. | 14 per cent |
| D. | 16 per cent |
| Answer» C. 14 per cent | |
| 20. |
A vertical angle of the projection of sun's rays on the horizontal plane and direction of sun's rays is called |
| A. | Zenith angle |
| B. | Altitude angle |
| C. | Hour angle |
| D. | Incident angle |
| Answer» C. Hour angle | |
| 21. |
The share of MB plough is made of |
| A. | Cast iron |
| B. | High carbon steel |
| C. | Chilled cast iron |
| D. | White metal |
| Answer» D. White metal | |
| 22. |
The expected annual use of seed drill is |
| A. | 800 hours |
| B. | 1000 hours |
| C. | 1200 hours |
| D. | 1500 hours |
| Answer» E. | |
| 23. |
Range of pressure angle in spur gear is |
| A. | 5?8 |
| B. | 5?12 |
| C. | 14?20 |
| D. | 20?25 |
| Answer» D. 20?25 | |
| 24. |
Thing layer drying includes |
| A. | Batch type dryer |
| B. | LSU dryer |
| C. | Flat bed dryer |
| D. | All are correct |
| Answer» D. All are correct | |
| 25. |
Main part of thresher that removes seeds from grain head is |
| A. | Cylinder |
| B. | Concave |
| C. | Pegs on cylinder |
| D. | Sieve |
| Answer» B. Concave | |
| 26. |
In floating type biogas plant, gas holder is made of |
| A. | Metal |
| B. | Wood |
| C. | Cement and bricks |
| D. | All are correct |
| Answer» B. Wood | |
| 27. |
The pump is used in power-operated sprayer is |
| A. | Plunger type |
| B. | Diaphragm type |
| C. | Gear type |
| D. | Piston type |
| Answer» D. Piston type | |
| 28. |
The size of mould board plough is expressed by |
| A. | Width of cut |
| B. | Depth of cut |
| C. | Size of furrow |
| D. | Plough width |
| Answer» B. Depth of cut | |
| 29. |
The operational life of a pair of rubber rolls is estimated at |
| A. | 80 tonne |
| B. | 90 tonnes |
| C. | 100 tonne |
| D. | 120 tonnes |
| Answer» D. 120 tonnes | |
| 30. |
In seed drill, the depth of seed placement for better germination should be |
| A. | 3 cm |
| B. | 5 cm |
| C. | 7 cm |
| D. | 10 cm |
| Answer» C. 7 cm | |
| 31. |
Pneumatic governor is used on |
| A. | Diesel engine |
| B. | Petrol engine |
| C. | Both (a) & (b) |
| D. | None of these |
| Answer» D. None of these | |
| 32. |
The knives of shredders are rotated in |
| A. | Horizontal plane with direction of travel |
| B. | Vertical plane with direction of travel |
| C. | Both (a) & (b) |
| D. | None of these |
| Answer» C. Both (a) & (b) | |
| 33. |
The loop type-threshing drum is use for threshing |
| A. | Wheat |
| B. | Paddy |
| C. | Gram |
| D. | Soyabean |
| Answer» C. Gram | |
| 34. |
Top link of trctor is also known as |
| A. | Tension link |
| B. | Mast |
| C. | Pressure link |
| D. | All are correct |
| Answer» E. | |
| 35. |
The true specific gravity of dominant material is |
| A. | 1.65 |
| B. | 2.65 |
| C. | 3.65 |
| D. | 4.65 |
| Answer» C. 3.65 | |
| 36. |
Ignition temperature of IC engines varies from |
| A. | 300-500?C |
| B. | 500-700?C |
| C. | 500-900?C |
| D. | 700-1000?C |
| Answer» D. 700-1000?C | |
| 37. |
Nudging system is used for |
| A. | Rising implement |
| B. | Lower the implement |
| C. | Both (a) & (b) |
| D. | None of these |
| Answer» D. None of these | |
| 38. |
277 per hectare application rate of low volume sprayer is |
| A. | 2 litres |
| B. | 3 litres |
| C. | 4 litres |
| D. | 5 litres |
| Answer» E. | |
| 39. |
Hot plugs are used in |
| A. | Diesel tractor |
| B. | Petrol tractors |
| C. | Powerine tractors |
| D. | All are correct |
| Answer» D. All are correct | |
| 40. |
The useful life of stationary engine is |
| A. | 10 years |
| B. | 15 years |
| C. | 12 years |
| D. | 20 years |
| Answer» B. 15 years | |
| 41. |
Removal of burnt gases from engine cylinder is called |
| A. | Pre-ignition |
| B. | Detonation |
| C. | Scavenging |
| D. | Supercharging |
| Answer» D. Supercharging | |
| 42. |
The metering mechanism used for mustard seed is |
| A. | Fluted roller |
| B. | Vertical plate type |
| C. | Cell fill type |
| D. | Stud roller type |
| Answer» E. | |
| 43. |
A shaft of disc harrow on which the number of discs is mounted is |
| A. | Standard |
| B. | Arbor bolt |
| C. | Spacer |
| D. | Scraper |
| Answer» C. Spacer | |
| 44. |
The energy obtained from the sun is |
| A. | Atomic energy |
| B. | Tidal energy |
| C. | Solar energy |
| D. | Wave energy |
| Answer» D. Wave energy | |
| 45. |
LSU dryer was developed in/at |
| A. | 1949 (USA) |
| B. | 1950 (England) |
| C. | 1965 (Japan) |
| D. | None of these |
| Answer» B. 1950 (England) | |
| 46. |
When crankshaft of the engine completes one cycle, the camshaft completes |
| A. | Two revolution |
| B. | Half revolution |
| C. | Equal revolution of crankshaft |
| D. | None of these |
| Answer» C. Equal revolution of crankshaft | |
| 47. |
A wheel used for maintaining uniform depth of ploughing in different soils is |
| A. | Transport wheel |
| B. | Land wheel |
| C. | Furrow wheel |
| D. | Gauge wheel |
| Answer» E. | |
| 48. |
Semi-solid lubricant is |
| A. | Gear oil |
| B. | Engine oil |
| C. | Grease |
| D. | None of these |
| Answer» D. None of these | |
| 49. |
Specific gravity of grains is determined by |
| A. | Pycnometer |
| B. | Specific gravity bottle |
| C. | Both (a) and (b) |
| D. | None of these |
| Answer» D. None of these | |
| 50. |
The capacity of RPEC dryer is about |
| A. | Half tonne per hour |
| B. | One tonne per hour |
| C. | Two tonne per hour |
| D. | All are correct |
| Answer» E. | |