Explore topic-wise MCQs in Chemical Engineering.

This section includes 5314 Mcqs, each offering curated multiple-choice questions to sharpen your Chemical Engineering knowledge and support exam preparation. Choose a topic below to get started.

4101.

Identify the unit of “k” in moles/L for the rate law: k[A][B]pow2$

A. L/mol/s
B. L(pow2)/mol/s
C. L(pow2)* s(pow2)/mol(pow2)
D. s
Answer» E.
4102.

A transformation function of particular importance in image processing is represented in which of the following form?

A. s=T(r)=∫<sub>0</sub> <sup>(2r)</sup>p<sub>r</sub> (ω)dω
B. s=T(r)=∫<sub>0</sub> <sup>(r-1)</sup>p<sub>r</sub> (ω)dω
C. s=T(r)=∫<sub>0</sub> <sup>(r/2)</sup>p<sub>r</sub> (ω)dω
D. s=T(r)=∫<sub>0</sub> p<sub>r</sub> (ω)dω
Answer» E.
4103.

The technique that is used to pass the data or parameter to procedures in assembly language program is by using

A. global declared variable
B. registers
C. stack
D. all of the mentioned
Answer» E.
4104.

Myoglobin binding of O2 depends on

A. Hemoglobin concentration
B. O<sub>2</sub> concentration and affinity of myoglobin for O2
C. K<sub>a</sub>
D. K<sub>d</sub>
Answer» C. K<sub>a</sub>
4105.

Which waveform scheme introduces bandwidth compression?

A. Duobinary
B. Manchester coding
C. Phase encoded waveform
D. Multilevel codes
Answer» E.
4106.

For a parallel connected resistor R1, R2 and a voltage of V volts. Current across the first resistor is given by

A. I R<sub>1</sub>
B. I R<sub>2</sub>
C. I R<sub>1</sub> / R<sub>1</sub> + R<sub>2</sub>
D. I R<sub>2</sub> / R<sub>1</sub> + R<sub>2</sub>
Answer» E.
4107.

The other name for Delta connection is ___________

A. Star connection
B. Pi connection
C. T connection
D. Y connection
Answer» C. T connection
4108.

PMDC device is commonly employed for:

A. Speed feedback in speed control system
B. Internal velocity feedback loop of a position control system
C. This device is used in both speed feedback and internal velocity feedback control
D. None of the mentioned
Answer» D. None of the mentioned
4109.

Which process is also called product recovery?

A. Upstream processing
B. Mid-stream processing
C. Downstream processing
D. Biological processing
Answer» D. Biological processing
4110.

If for an algorithm time complexity is given by O((3‚ÅÑ2)n) then complexity will:$

A. constant
B. quardratic
C. exponential
D. none of the mentioned
Answer» D. none of the mentioned
4111.

The UPDATE SQL clause can

A. update only one row at a time
B. update more than one row at a time
C. delete more than one row at a time
D. delete only one row at a time
Answer» C. delete more than one row at a time
4112.

Which of the following options doesn’t defined for the necessity for the existence of the potential barrier?$

A. Contact
B. Potential
C. Diffusion
D. Fermi dirac
Answer» E.
4113.

The signed magnitude for -3 will be ___________

A. 00000011
B. 10000011
C. 11111101
D. 11111100
Answer» C. 11111101
4114.

The soil suction is maximum ,when angle of contact(α) is_____________$

A. α=0
B. α=90
C. α=60
D. α=1
Answer» B. ‚âà√≠¬¨¬±=90
4115.

When it is not possible to have the flushing nozzles close to the top or bottom of the workpiece _____ machines may require constant adjustment of the top and bottom flush.

A. submerged type
B. splash flush
C. rigid flush
D. stock flush
Answer» C. rigid flush
4116.

ESP is abbreviated as ____________

A. Encapsulating Security Payload
B. Encapsulating Secure Protocol
C. Encrypted Secure Payload
D. Encapsulating Secure Payload
Answer» E.
4117.

1–Value is set$

A. 2–Value is set
B. 1–Value is set
C.
Answer» C.
4118.

In the equation, 20cos⁡(108 t+3 sin⁡109 t) the modulation index is ________$

A. 1
B. 2
C. 3
D. 4
Answer» D. 4
4119.

The protecting part of the tread beyond the face of Riser is known as a ______

A. Pitch
B. Rise
C. Riser
D. Nosing
Answer» E.
4120.

What is the formula for lost work?

A. LW = h- TΔS
B. LW = T<sub>0 </sub>– TΔS<sub>irr</sub>
C. LW = T<sub>0</sub> ΔS<sub>irr</sub>
D. LW = T<sub>0</sub> – S<sub>irr</sub>
Answer» D. LW = T<sub>0</sub> ‚Äö√Ñ√∂‚àö√ë‚àö¬® S<sub>irr</sub>
4121.

Blends of terylene fibers with wool have better crease and wrinkle resistance, they are more durable, higher strength, do not shrink and are not attacked by moths.

A. True
B. False
Answer» B. False
4122.

What effect does cobalt have on steel?

A. Increases hardenability
B. Decreases hardenability
C. Changes color
D. No change
Answer» C. Changes color
4123.

Find the checksum byte for the fallowing data words: 10110011, 10101011, 01011010, 11010101

A. 10001101
B. 01110010
C. 10110101
D. 01110010
Answer» B. 01110010
4124.

In case of compression members where forces are transferred through butting faces, pitch shall not exceed ___ for a distance of 1.5 times width of member from butting faces.

A. 4.5d, where d= diameter of fasteners
B. 5d, where d= diameter of fasteners
C. 2.5d, where d= diameter of fasteners
D. 5.5d, where d= diameter of fasteners
Answer» B. 5d, where d= diameter of fasteners
4125.

Which of the following is true, when the density of LDPE is increased?

A. crystallinity decreases
B. permeability to liquid and gas decreases
C. toughness increases
D. all of the mentioned
Answer» C. toughness increases
4126.

Maximum possible efficiency of a self-locking screw is

A. 50%
B. 75%
C. 66%
D. 33%
Answer» B. 75%
4127.

In which of the following operations is a dummy block used?

A. Indirect extrusion
B. Direct extrusion
C. Impact extrusion
D. Hydrostatic extrusion
Answer» C. Impact extrusion
4128.

Which of the following are true for selecting ans profiling standards?

A. The art of choosing your standard starts with market research
B. To select the standards to use, one has to categorize them
C. All of the mentioned
D. None of the mentioned
Answer» D. None of the mentioned
4129.

Which phase of the RUP is used to establish a business case for the system ?

A. Transition
B. Elaboration
C. Construction
D. Inception
Answer» E.
4130.

The ignition timing is fixed to obtain minimum power from the engine.

A. True
B. False
Answer» C.
4131.

The divergence theorem value for the function x2 + y2 + z2 at a distance of one unit from the origin is

A. 0
B. 1
C. 2
D. 3
Answer» E.
4132.

Energy flow is cyclic

A. True
B. False
Answer» C.
4133.

Which defect is rupturing of sheet and following the roller path?

A. Folds
B. Laminations
C. Alligatoring
D. Wavy edges
Answer» D. Wavy edges
4134.

Which circuit is used as active load for an amplifier

A. Wildar Current source
B. Darlington pair
C. Current Mirror
D. All of the mentioned
Answer» D. All of the mentioned
4135.

Superconductors can be used as a memory or storage elements in computers.

A. True
B. False
Answer» B. False
4136.

Which vectors are mostly used for creating genomic libraries?

A. Lambda phage vectors
B. M13 phage vectors
C. Plasmid vectors
D. Cosmid vectors
Answer» B. M13 phage vectors
4137.

The scale factor of viewport transformation for x co-ordinate is ________

A. S<sub>x</sub> = (sv<sub>max</sub> – sv<sub>min</sub>)/ (sw<sub>max</sub> – sw<sub>min</sub>)
B. S<sub>x</sub> = (sv<sub>max</sub> – sv<sub>min</sub>)/ (sw<sub>max</sub> + sw<sub>min</sub>)
C. S<sub>x</sub> = (sv<sub>min</sub> – sv<sub>max</sub>)/ (sw<sub>max</sub> – sw<sub>min</sub>)
D. S<sub>x</sub> = (sv<sub>max</sub> + sv<sub>min</sub>)/ (sw<sub>max</sub> – sw<sub>min</sub>)
Answer» B. S<sub>x</sub> = (sv<sub>max</sub> ‚Äö√Ñ√∂‚àö√ë‚àö¬® sv<sub>min</sub>)/ (sw<sub>max</sub> + sw<sub>min</sub>)
4138.

In matrix form, system equation is expressed as

A. r<sub>i</sub>v<sub>i</sub> = -f<sub>j</sub>
B. r<sub>i</sub>v<sub>i</sub> = -K<sub>j</sub>
C. r<sub>i</sub>v<sub>i</sub> = -G<sub>j</sub>
D. r<sub>i</sub>v<sub>i</sub> = -Z<sub>j</sub>
Answer» B. r<sub>i</sub>v<sub>i</sub> = -K<sub>j</sub>
4139.

Determine the Time period of: x(t)=3 cos⁡(20t+5)+sin⁡(8t-3).$

A. 1/10 sec
B. 1/20 sec
C. 2/5 sec
Answer» D.
4140.

Electrolyte flow plays an important role in ECM.

A. True
B. False
Answer» B. False
4141.

Calculate the pressure exerted by 9 kg of air at a temperature of 20‚ÑÉ if the volume is 0.8m3. Assuming ideal gas laws are applicable.$

A. 946 kN/m<sup>2</sup>
B. 1892 kN/m<sup>2</sup>
C. 1419 kN/m<sup>2</sup>
D. None of the mentioned
Answer» B. 1892 kN/m<sup>2</sup>
4142.

The derivative of digital function is defined in terms of difference. Then, which of the following defines the first order derivative ∂f/∂x= ___________ of a one-dimensional function f(x)?$

A. f(x+1)-f(x)
B. f(x+1)+ f(x-1)-2f(x)
C. All of the mentioned depending upon the time when partial derivative will be dealt along two spatial axes
D. None of the mentioned
Answer» B. f(x+1)+ f(x-1)-2f(x)
4143.

Which of the following is true for proxy pattern?

A. Has exactly the same interface as the real object
B. Handles routine or illegitimate messages without accessing the real object
C. Delegates messages that it cannot handle to the real object
D. All of the mentioned
Answer» E.
4144.

Any business house is concerned with _______ communication.

A. external
B. dumb
C. deaf
D. blind
Answer» B. dumb
4145.

Which of the following grade is never used for fits?

A. H10
B. H11
C. H8
D. H9
Answer» C. H8
4146.

Which of the following method is called while accessing documents using the array index notation ?

A. cur.toArray()
B. cursor.toArray()
C. doc.toArray()
D. all of the mentioned
Answer» C. doc.toArray()
4147.

The phenomenon of decreased resistance of the materials to fluctuating stresses is the main characteristic of _____ failure.

A. Fracture
B. Fatigue
C. Yielding
D. None of the mentioned
Answer» C. Yielding
4148.

The greatest separation is obtained in which portion of the gel?

A. Lower portion where the anode is
B. Lower portion where the cathode is
C. The separation is uniform all over
D. It varies according to the quantity of the size of the molecules to be separated
Answer» B. Lower portion where the cathode is
4149.

Which command is used for compressing and archiving files together?

A. gzip and tar
B. gzip
C. bzip2
D. zip
Answer» E.
4150.

What is the range of time slot in Bluetooth?

A. 120 milliseconds
B. 625 microseconds
C. 577 microseconds
D. 5.7 seconds
Answer» C. 577 microseconds