Explore topic-wise MCQs in Chemical Engineering.

This section includes 5314 Mcqs, each offering curated multiple-choice questions to sharpen your Chemical Engineering knowledge and support exam preparation. Choose a topic below to get started.

4051.

The ratio of heat actually released by 1kg of fuel to heat that would be released by complete perfect combustion, is called

A. Thermal efficiency
B. Combustion efficiency
C. Engine efficiency
D. Compression efficiency
Answer» C. Engine efficiency
4052.

A bidirectional feedback loop links computer modeling with:

A. artificial science
B. heuristic processing
C. human intelligence
D. cognitive science
Answer» D. cognitive science
4053.

The AND function can be used to ___________ and the OR function can be used to _____________

A. Enable, disable
B. Disable, enable
C. Synchronize, energize
D. Detect, invert
Answer» B. Disable, enable
4054.

If the temperature increases 10°C, the ratio of final reverse saturation current to initial reverse saturation current is _______$

A. 1
B. 2
C. 1.5
D. 3
Answer» C. 1.5
4055.

What is the effect of increase in pressure at which heat is added on the pump work in the Rankine cycle?

A. the pump work increases with increase in pressure of heat addition
B. the pump work decreases with increase in pressure of heat addition
C. the pump work does not change with increase in pressure of heat addition
D. the pump work either increases or decreases with increase in pressure of heat addition
Answer» B. the pump work decreases with increase in pressure of heat addition
4056.

What is the characteristic variation shown by the thixotropic fluids in their shear stress vs. rate of shear strain graph?

A. shear stress increases with increase in rate of shear strain
B. shear stress decreases with increase in rate of shear strain
C. shear stress shows variation only after a definite shear stress is reached
D. shear stress has decreasing constant and then variation relationship with rate of shear strain
Answer» D. shear stress has decreasing constant and then variation relationship with rate of shear strain
4057.

The permanent hardness is also known as

A. Pseudo hardness
B. Non carbonate hardness
C. Carbonate hardness
D. Brinell hardness
Answer» C. Carbonate hardness
4058.

__________ is the practice implemented to spy someone using technology for gathering sensitive information.

A. Cyber espionage
B. Cyber-spy
C. Digital Spying
D. Spyware
Answer» B. Cyber-spy
4059.

The width of drive way should be

A. Minimum
B. Maximum
C. Intermediate
D. Maximum or minimum
Answer» B. Maximum
4060.

For better transfer rates on the SCSI BUS the length of the cable is limited to ______

A. 2m
B. 4m
C. 1.3m
D. 1.6m
Answer» E.
4061.

What should be the temperature of the metal ware for best coating to occur?

A. Little more than the melting point of the polymer
B. Same as melting point temperature of the polymer
C. Very high temperature
D. None of the mentioned
Answer» B. Same as melting point temperature of the polymer
4062.

Molecules greater than what size cannot be separated without using electric field?

A. 1 kb
B. 2 kb
C. 10 kb
D. 20 kb
Answer» E.
4063.

Which is the type of fold with similar degree of folding for indefinite depths?

A. Concentric fold
B. Similar fold
C. Conjugate fold
D. Uniform fold
Answer» C. Conjugate fold
4064.

Which of the following is a Hill reagent?

A. Sugar
B. Chlorophylls
C. 2, 6- dichlorophenolindophenol
D. Nicotinamide adenine dinucleotide phosphate
Answer» D. Nicotinamide adenine dinucleotide phosphate
4065.

If the window is created from left to right, the items partially enclosed in the window will not be selected.

A. True
B. False
Answer» B. False
4066.

Property which indicates how many seconds this cookie should be persisted.

A. cookieMaxAge
B. cookieName
C. cookieAge
D. none of the mentioned
Answer» B. cookieName
4067.

The size of ________ depends on the dimension of the room, use of the room, location of the room, direction and speed of the wind, obstruction to light by neighbouring buildings, etc.

A. Ventilator
B. Door
C. Window
D. Lintels
Answer» D. Lintels
4068.

State true or false: Users can define new data types in SQL

A. True
B. False
Answer» B. False
4069.

Which of the following relationship are usually identified as average effects ?

A. Descriptive
B. Causal
C. Predictive
D. None of the Mentioned
Answer» C. Predictive
4070.

“The data collected in measure step may have a reference from the historical records.” Which of these options is correct bearing the above statement in mind?$

A. Data from the historical records is satisfactory
B. Data from the historical records may not always be satisfactory
C. Data must always be collected only from historical records
D. Historical records are most reliable for data collection
Answer» C. Data must always be collected only from historical records
4071.

Let P, Q, R be true, false true , respectively, which of the following is true

A. P‚àßQ‚àßR
B. P‚àß~Q‚àß~R
C. Q->(P‚àßR)
D. P->(Q‚àßR)
Answer» D. P->(Q‚Äö√Ñ√∂‚àö‚Ć‚àö√ºR)
4072.

PSEN stands for ________

A. Program Select Enable
B. Peripheral Store Enable
C. Program Store Enable
D. Peripheral Select Enable
Answer» D. Peripheral Select Enable
4073.

With an increase in the heat input of arc welding method, how does it affect the welding speed?

A. Increases
B. Decreases
C. Remains same
D. No relation
Answer» C. Remains same
4074.

At what condition, the rate of electron capture from the conduction band and the rate of the electron emission back into the conduction band must be equal?

A. Thermal equilibrium
B. At room temperature
C. T=250K
D. At boiling temperature
Answer» B. At room temperature
4075.

Which of the following makes use of pandas and returns data in a Series or DataFrame?

A. pandaSDMX
B. freedapi
C. OutPy
D. none of the Mentioned
Answer» C. OutPy
4076.

The probable causes of hunting is

A. sudden change in load
B. fault in supply
C. sudden change in field current
D. all of the mentioned
Answer» E.
4077.

One of the important effects of the collision is the formation of _______

A. Slug
B. Cracks
C. Gases
D. Shine
Answer» C. Gases
4078.

Which apparatus is used to test the hardness of stones?

A. Los Angeles
B. Deval’s
C. CTM
D. Dorry’s
Answer» E.
4079.

Living organisms can use Nitrogen (N2) as it occurs in the atmosphere.

A. True
B. False
Answer» C.
4080.

What Is NOT the use of plots of thermodynamic properties?

A. Used to establish correlations.
B. Used to make general observation
C. Used to extrapolate and find unknown quantities
D. Used to know the purity
Answer» E.
4081.

Which of the following is soft in nature?

A. Coarse perliite
B. Fine perlite
C. Bainite
D. Martensite
Answer» B. Fine perlite
4082.

The force that opposes the motion of a vehicle is

A. Rolling resistance
B. Gradient resistance
C. Wind or air resistance
D. All of the mentioned
Answer» E.
4083.

For an unpacked coated capillary column, the obstruction factor takes which of the following values?

A. 0
B. 0.6
C. 1
D. 1.6
Answer» D. 1.6
4084.

In software testing, a _____________ is a collection of software and test data configured to test a program unit by putting it under varying conditions and monitoring its behavior and output.

A. Test harness
B. Test automation
C. Test mechanics
D. Test manuscripts
Answer» B. Test automation
4085.

Gibbs is a web-based program that uses the Gibbs sampling approach to look for _____ gap-free segments for either DNA or protein sequences.

A. short, partially conserved
B. long, partially conserved
C. long, conserved
D. short, not conserved
Answer» B. long, partially conserved
4086.

The number of full and half adders are required to add 16-bit number is

A. 8 half adders, 8 full adders
B. 1 half adders, 15 full adders
C. 16 half adders, 0 full adders
D. 4 half adders, 12 full adders
Answer» C. 16 half adders, 0 full adders
4087.

Taper boring and the under boring can be performed by______

A. centers
B. face plates or angle plates
C. special attachments
D. none of the mentioned
Answer» C. special attachments
4088.

The flywheel of a steam engine has a radius of gyration of 1 m and mass 2500 kg. The starting torque of the steam engine is 1500 N-m and may be assumed constant. Determine : Angular acceleration of the flywheel.

A. 0.6 rad/s<sup>2</sup>
B. 0.8 rad/s<sup>2</sup>
C. 0.10 rad/s<sup>2</sup>
D. none of the mentioned
Answer» C. 0.10 rad/s<sup>2</sup>
4089.

If the reference and collector current are 0.539mA and 0.49mA respectively, how many transistors are used in current repeater circuit? (Assume β =150)$

A. 11
B. 14
C. 10
D. 8
Answer» C. 10
4090.

The _______property is used to set the color of the text.

A. pallet
B. colour
C. color
D. text-decoration
Answer» E.
4091.

What is the angle of self-holding tapers?

A. 2 to 3 degrees
B. 7 to 8 degrees
C. 10 to 15 degrees
D. 15 to 17 degrees
Answer» B. 7 to 8 degrees
4092.

In LVDT the secondary coils are energized with sine wave oscillator?

A. True
B. False
Answer» C.
4093.

If ‚àá*V is not equal to zero, then the flow is __________$

A. steady
B. unsteady
C. rotational
D. irrotational
Answer» D. irrotational
4094.

d-block elements generally show multiple oxidation states. An exception to this is:

A. Zinc
B. Mercury
C. Copper
D. None of the mentioned
Answer» E.
4095.

Which of the following property allows long words to be able to be broken and wrap onto the next line?

A. line-wrap
B. break-word
C. word-wrap
D. word-break
Answer» D. word-break
4096.

A file contains 2 million bytes. How long does it take to download this file using a 56-Kbps channel?

A. 1-2 mins
B. 5-6 mins
C. 2-4 mins
D. 7-8 mins
Answer» C. 2-4 mins
4097.

A 230V, 50Hz, single-pulse SCR is feeding a RL load with α = 40° and β = 210°. Find the value of average output voltage$

A. 54 V
B. 106 V
C. 84 V
D. 32 V
Answer» D. 32 V
4098.

Which of the following is not the type of classification as per the method of manufacturing the tool?

A. tipped tool, which is brazed to the carbon steel shank
B. tipped tool, which is fastened mechanically to the carbon steel shank
C. grooving
D. none of the mentioned
Answer» D. none of the mentioned
4099.

Tools that you develop can plug into the workbench using well defined hooks called ________

A. SDK
B. Extension Point
C. JDK
D. GNU
Answer» C. JDK
4100.

Which of the following is the capacity Q in tons?

A. 0.0068 ND wds
B. 1.20 ND wds
C. 5 ND wds
D. 10 N D
Answer» B. 1.20 ND wds