Explore topic-wise MCQs in Advanced Machining.

This section includes 2460 Mcqs, each offering curated multiple-choice questions to sharpen your Advanced Machining knowledge and support exam preparation. Choose a topic below to get started.

2151.

The fully prestressed members are prone to excessive:

A. Downward deflections
B. Upward deflections
C. Side deflections
D. Transverse deflections
Answer» D. Transverse deflections
Discussion
2152.

The power actually developed by the engine cylinder of an I.C. engine is known as

A. theoretical power
B. actual power
C. indicated power
D. none of the mentioned
Answer» D. none of the mentioned
Discussion
2153.

Which of the following complexes produces the active site of the splicosome?

A. A complex
B. A complex rearrangement
C. B complex
D. C complex
Answer» E.
Discussion
2154.

It requires ________ pound(s) of milk to produce one gallon of gourmet ice cream.

A. 8
B. 12
C. 16
D. 24
Answer» C. 16
Discussion
2155.

The relationships shown in this section strictly apply to only a single wavelength of light

A. True
B. False
Answer» B. False
Discussion
2156.

Out of solid, liquid and gas of the same mass and at the same temperature, which one has the greatest internal energy?

A. Solid
B. Liquid
C. Gas
D. All three have the same internal energy
Answer» D. All three have the same internal energy
Discussion
2157.

Polyadenylation sites downstream of the promoter should be avoided because _______________

A. Blocking of the replication cycle
B. Elongation of RNA
C. Elongation of DNA
D. DNA synthesis is inhibited
Answer» B. Elongation of RNA
Discussion
2158.

Which system makes the detection difficult for all users other than the intended users?

A. Low probability of intercept
B. Low probability of detection
C. Low probability of intercept & detection
D. None of the mentioned
Answer» D. None of the mentioned
Discussion
2159.

Which of the following is true about electron beam machining (EBM)?

A. By EBM process, tapered holes can be generated
B. Electro-magnetic coils are used to change the direction of the electron beam
C. Electron beam gun works under high pressure
D. Increasing the current density increases the spot size
Answer» B. Electro-magnetic coils are used to change the direction of the electron beam
Discussion
2160.

The reserved memory or private space of the subroutine gets deallocated when _______

A. The stop instruction is executed by the routine
B. The pointer reaches the end of the space
C. When the routine’s return statement is executed
D. None of the mentioned
Answer» D. None of the mentioned
Discussion
2161.

Poly carbonates are used as ________ in the high stability capacitors.

A. Accelerator
B. Inhibitor
C. Dielectric
D. Initiator
Answer» D. Initiator
Discussion
2162.

What is the second difference that is used to replace the second order derivate of y(t)?

A. [y(n)-2y(n-1)+y(n-2)]/T
B. [y(n)-2y(n-1)+y(n-2)]/T2
C. [y(n)+2y(n-1)+y(n-2)]/T
D. [y(n)+2y(n-1)+y(n-2)]/T2
Answer» C. [y(n)+2y(n-1)+y(n-2)]/T
Discussion
2163.

In the perpendicularity of drill head guide to base plate test, what is the position of guide column?

A. Inclined at the upper end towards the front only
B. Declined at the upper end towards the front only
C. Inclined at the upper end towards the back only
D. Declined at the upper end towards the front only
Answer» B. Declined at the upper end towards the front only
Discussion
2164.

Is lift is created on the airfoil using kutta condition?

A. True
B. False
Answer» B. False
Discussion
2165.

If f is a function defined from R to R , is given by f(x) = 3x – 5 then f –1(x) is given by:$

A. 1/(3x-5)
B. (x+5)/3
C. does not exist since it is not a bijection
D. none of the mentioned
Answer» C. does not exist since it is not a bijection
Discussion
2166.

What is the range of the pole length to pole pitch ratio for obtaining good power factor in induction motors?

A. 1.5-2
B. 1.3–1.8
C. 1.0-1.25
D. 1.1-1.6
Answer» D. 1.1-1.6
Discussion
2167.

If the selectable markers are not expressed in the new host, then ____________ is necessary.

A. Helper phage
B. Manipulations
C. Temperature control
D. Recombination
Answer» C. Temperature control
Discussion
2168.

Sedimentation techniques are particularly useful for the particle size ranging from

A. 50-10 µm
B. 40-2 µm
C. 100-50 µm
D. 80-40µm
Answer» C. 100-50 ¬¨¬®¬¨¬µm
Discussion
2169.

What is name of above mechanism?

A. hebb rule learning
B. error correction learning
C. memory based learning
D. none of the mentioned
Answer» B. error correction learning
Discussion
2170.

You can expand the memory of some PDAs with ________ that can be inserted into the PDA.

A. hard disks
B. storage cards
C. pendrives
D. floppy disks
Answer» C. pendrives
Discussion
2171.

Power required for a gassed system is more than that required for an ungassed system.

A. True
B. False
Answer» C.
Discussion
2172.

Which of the following model is best for computer simulation?

A. Auto Model
B. HYSYS Model
C. Cremer Model
D. Two parameter model
Answer» C. Cremer Model
Discussion
2173.

Spring Batch will, by default, try to pluck the:-

A. PlatformTransactionManager
B. transactionManager
C. All of the mentioned
D. None of the mentioned
Answer» D. None of the mentioned
Discussion
2174.

The secondary winding of a P.T. is designed for

A. 220 V
B. 2.2 kV
C. 1.1 kV
D. 110 V
Answer» E.
Discussion
2175.

In explosive rivets, instead of mandrel _______ is used.

A. rod
B. explosive
C. breaking type of mandrel
D. non-breaking type of mandrel
Answer» C. breaking type of mandrel
Discussion
2176.

The contact ratio for gears is

A. zero
B. less than one
C. greater than one
D. none of the mentioned
Answer» D. none of the mentioned
Discussion
2177.

Glass electrode is an ion selective electrode.

A. True
B. False
Answer» B. False
Discussion
2178.

Exposure to ______ caused environmental hazard in USA in the year 1985.

A. Methylisocyanate
B. Lead in paint
C. Carbamate pesticide
D. Lead
Answer» D. Lead
Discussion
2179.

What is Portability?

A. It is ability of system to run into different environments
B. It is ability of system to confined to one environment
C. All of the mentioned
D. None of the mentioned
Answer» B. It is ability of system to confined to one environment
Discussion
2180.

The main components of the expert systems is/are,

A. Inference Engine
B. Knowledge Base
C. Inference Engine & Knowledge Base
D. None of the mentioned
Answer» D. None of the mentioned
Discussion
2181.

The lagging reactive power delivered by a line is proportional to the line _____ and independent of _____

A. voltage,δ
B. δ, voltage
C. voltage, sinδ
D. voltage drop, cos δ
Answer» B. ‚âà√≠¬¨‚Ä¢, voltage
Discussion
2182.

_________ is an Igneous rock with compressive strength varies from 75 to 127 Newton per mm square and its weight is about 26 to 27 kN per metre cube.

A. Basalt
B. Granite
C. Marble
D. Slate
Answer» C. Marble
Discussion
2183.

The frequency of a wave travelling in a transmission line with velocity 4 x 108 and wavelength 3 units is

A. 0.75 GHz
B. 0.133 GHz
C. 7.5 GHz
D. 1.33 GHz
Answer» C. 7.5 GHz
Discussion
2184.

Wire-like pSi structures are produced when the distance between noble metal particles is reduced.

A. True
B. False
Answer» B. False
Discussion
2185.

How many arguments are accepted by publish()?

A. 5 arguments
B. 3 arguments
C. 1 argument
D. 2 arguments
Answer» E.
Discussion
2186.

TKIP is an access control protocol.

A. True
B. False
Answer» C.
Discussion
2187.

_______ function is used to simulate binary random variables.

A. dnorm
B. rbinom()
C. binom()
D. rpois
Answer» C. binom()
Discussion
2188.

The allowable pressure, that should be selected for a maximum settlement is____________

A. 40 mm
B. 25 mm
C. 30 mm
D. 10 mm
Answer» C. 30 mm
Discussion
2189.

For general purpose, l/d ratio should be_____

A. 5 to 10
B. 10 to 20
C. more than 20
D. none of the mentioned
Answer» B. 10 to 20
Discussion
2190.

Wheel load distribution in one side of benkleman beam test is.

A. 1080 kg
B. 2880 kg
C. 4085 kg
D. 8170 kg
Answer» D. 8170 kg
Discussion
2191.

When the _________ is used as the method’s first client, it becomes easier to focus purely on the API.$

A. Object
B. Class
C. Test
D. Stub
Answer» D. Stub
Discussion
2192.

TCAS I provide proximity warning only.

A. True
B. False
Answer» B. False
Discussion
2193.

The maximum efficiency of the reciprocating pump is _________

A. 20
B. 50
C. 70
D. 85
Answer» E.
Discussion
2194.

A non deterministic two way, nested stack automaton has n-tuple definition. State the value of n.

A. 5
B. 8
C. 4
D. 10
Answer» E.
Discussion
2195.

The net heat exchange between the two grey surfaces may be written as

A. (Q <sub>12</sub>) <sub>NET </sub>= E <sub>b 1 </sub>– E <sub>b 2</sub>/ (1 – e <sub>1</sub>/A <sub>1</sub> e<sub> 1</sub> + 1/A <sub>1 </sub>F <sub>12</sub> + 1 – e <sub>2</sub>/A <sub>2</sub> e<sub> 2</sub>)
B. (Q <sub>12</sub>) <sub>NET </sub>= 2 E <sub>b 1 </sub>– E <sub>b 2</sub>/ (1 – e <sub>1</sub>/A <sub>1</sub> e<sub> 1</sub> + 1/A <sub>1 </sub>F <sub>12</sub> + 1 – e <sub>2</sub>/A <sub>2</sub> e<sub> 2</sub>)
C. (Q <sub>12</sub>) <sub>NET </sub>= E <sub>b 1 </sub>– 2 E <sub>b 2</sub>/ (1 – e <sub>1</sub>/A <sub>1</sub> e<sub> 1</sub> + 1/A <sub>1 </sub>F <sub>12</sub> + 1 – e <sub>2</sub>/A <sub>2</sub> e<sub> 2</sub>)
D. (Q <sub>12</sub>) <sub>NET </sub>= 2 E <sub>b 1 </sub>– 3 E <sub>b 2</sub>/ (1 – e <sub>1</sub>/A <sub>1</sub> e<sub> 1</sub> + 1/A <sub>1 </sub>F <sub>12</sub> + 1 – e <sub>2</sub>/A <sub>2</sub> e<sub> 2</sub>)
Answer» B. (Q <sub>12</sub>) <sub>NET </sub>= 2 E <sub>b 1 </sub>‚Äö√Ñ√∂‚àö√ë‚àö¬® E <sub>b 2</sub>/ (1 ‚Äö√Ñ√∂‚àö√ë‚àö¬® e <sub>1</sub>/A <sub>1</sub> e<sub> 1</sub> + 1/A <sub>1 </sub>F <sub>12</sub> + 1 ‚Äö√Ñ√∂‚àö√ë‚àö¬® e <sub>2</sub>/A <sub>2</sub> e<sub> 2</sub>)
Discussion
2196.

Which of the following is the propagation delay of TTL circuits?

A. 1 s
B. 1 ms
C. 1 ns
D. 1 ps
Answer» D. 1 ps
Discussion
2197.

In which part of India we can found fan-throated lizard?

A. Northern India
B. Western India
C. Southern India
D. Eastern India
Answer» D. Eastern India
Discussion
2198.

Which of these means “bundle of cotton”?$

A. Bail
B. Bael
C. Bale
D. Beal
Answer» D. Beal
Discussion
2199.

Assuming that the origin of F(u, v), Fourier transformed function of f(x, y) an input image, has been correlated by performing the operation f(x, y)(-1)x+y prior to taking the transform of the image. If F and f are of same size, then what does the given operation is/are supposed to do?

A. Resize the transform
B. Rotate the transform
C. Shifts the center transform
D. All of the mentioned
Answer» D. All of the mentioned
Discussion
2200.

What is the thickened concentration of the trickling filter sludge?

A. 3-6%
B. 1-3%
C. 6-9%
D. 0.5%
Answer» B. 1-3%
Discussion