MCQOPTIONS
Saved Bookmarks
MCQOPTIONS
This section includes 2460 Mcqs, each offering curated multiple-choice questions to sharpen your Advanced Machining knowledge and support exam preparation. Choose a topic below to get started.
| 551. |
Which among the following are the parts of the electronic design of the coin counter system? |
| A. | Angular presenter |
| B. | DC motor |
| C. | Electronic counting system |
| D. | Funnel |
| Answer» D. Funnel | |
| 552. |
Which among the following are the parts of the mechanical design of the coin counter system? |
| A. | DC motor |
| B. | Coin presenter |
| C. | Coin sensors |
| D. | Electronic counting system |
| Answer» B. Coin presenter | |
| 553. |
The features of the coin and the value of coin are determined by the well-designed sensing system. |
| A. | True |
| B. | False |
| Answer» B. False | |
| 554. |
What is the function of the DC motor in the coin counter system? |
| A. | Feedback system |
| B. | Rotating system |
| C. | Sensing system |
| D. | Driving system |
| Answer» C. Sensing system | |
| 555. |
The design of a coin counter system is divided into how many parts? |
| A. | 5 parts |
| B. | 2 parts |
| C. | 1 part |
| D. | 4 parts |
| Answer» C. 1 part | |
| 556. |
A multiplexed display is used to display the total values of the coins in a coin counter system. |
| A. | True |
| B. | False |
| Answer» B. False | |
| 557. |
The sensor output in a coin counter system is interfaced to ____ |
| A. | DC motor |
| B. | Electronic circuitry |
| C. | Feedback system |
| D. | Graphical user interface |
| Answer» C. Feedback system | |
| 558. |
How does a coin counter system identify the denomination of coins? |
| A. | Sensors |
| B. | Transducers |
| C. | DC motor |
| D. | Electronic circuitry |
| Answer» B. Transducers | |
| 559. |
Which of the following is not DOM property? |
| A. | element.appendChild(node) |
| B. | document.createElement() |
| C. | element.innerHTML |
| D. | document.getElementById() |
| E. | document.createElement()c) element.innerHTMLd) document.getElementById() |
| Answer» E. document.createElement()c) element.innerHTMLd) document.getElementById() | |
| 560. |
Which browser does not support element? |
| A. | Chrome |
| B. | Firefox |
| C. | Internet Explorer |
| D. | Opera |
| Answer» D. Opera | |
| 561. |
does not include the attribute ___________ |
| A. | id |
| B. | hidden |
| C. | lang |
| D. | src |
| Answer» E. | |
| 562. |
The .content property is __________ |
| A. | read-only |
| B. | write-only |
| C. | read-write |
| D. | hidden |
| Answer» B. write-only | |
| 563. |
Templates can’t be placed inside ______________ |
| A. | <head> |
| B. | <body> |
| C. | <table> |
| D. | <form> |
| Answer» E. | |
| 564. |
Sprites are _____________ |
| A. | 1-D images |
| B. | 2-D images |
| C. | 3-D images |
| D. | not the image |
| Answer» C. 3-D images | |
| 565. |
One of the more useful settings for the RetryTemplate is the :- |
| A. | BackOff |
| B. | Back |
| C. | BackOffPolicy |
| D. | All of the mentioned |
| Answer» D. All of the mentioned | |
| 566. |
The RetryTemplate itself is configured in the Spring context, although it’s trivial to create in code. |
| A. | True |
| B. | False |
| Answer» B. False | |
| 567. |
The RetryTemplate supports many use cases, with convenient APIs to wrap. |
| A. | True |
| B. | false |
| Answer» B. false | |
| 568. |
You can specify exception classes on which to retry the operation. |
| A. | True |
| B. | FalseView Answer |
| Answer» B. FalseView Answer | |
| 569. |
Some invocations will fail but may be retried with some likelihood of success in a transactional scenario. |
| A. | True |
| B. | False |
| Answer» C. | |
| 570. |
You want to work with a resource that may fail when you try to read from or write to it. |
| A. | TransactionManager |
| B. | Transaction |
| C. | Spring batch retry |
| D. | All of the mentioned |
| Answer» D. All of the mentioned | |
| 571. |
no-rollback-exception-classes element Exception classes that should not cause the transaction to roll back. |
| A. | True |
| B. | FalseView Answer |
| Answer» B. FalseView Answer | |
| 572. |
Transaction capabilities are built on top of the first class support already provided by the core Spring framework. |
| A. | True |
| B. | False |
| Answer» B. False | |
| 573. |
The quantity of soil collected in benkleman beam method is ___________ |
| A. | 10 g |
| B. | 100 g |
| C. | 1000 g |
| D. | 2000 g |
| Answer» C. 1000 g | |
| 574. |
The depth of the hole dug for measuring of temperature is ___________ |
| A. | 45 mm |
| B. | 55 mm |
| C. | 65 mm |
| D. | 75 mm |
| Answer» B. 55 mm | |
| 575. |
The minimum length of a sub stretch is ___________ |
| A. | 0.5 km |
| B. | 1.0 km |
| C. | 1.5 km |
| D. | 2.0 km |
| Answer» C. 1.5 km | |
| 576. |
The test pits are maximum dug at a distance of ___________ |
| A. | 150 m |
| B. | 250 m |
| C. | 300 m |
| D. | 500 m |
| Answer» E. | |
| 577. |
The pavement whose rut depth is less than 10 mm is classified as ___________ |
| A. | Poor |
| B. | Very poor |
| C. | Fair |
| D. | Good |
| Answer» E. | |
| 578. |
The clear space between the two tyres of the dual wheels should be ___________ |
| A. | 20 mm |
| B. | 25 mm |
| C. | 27.5 mm |
| D. | 30 mm |
| Answer» E. | |
| 579. |
Wheel load distribution in one side of benkleman beam test is ___________ |
| A. | 1080 kg |
| B. | 2880 kg |
| C. | 4085 kg |
| D. | 8170 kg |
| Answer» D. 8170 kg | |
| 580. |
The tyre pressure in benkleman beam method should be inflated to (in kg/cm2). |
| A. | 5 |
| B. | 5.2 |
| C. | 5.4 |
| D. | 5.6 |
| Answer» E. | |
| 581. |
The least count of the small needle in benkleman beam test is ___________ |
| A. | 0.5 mm |
| B. | 1.0 mm |
| C. | 1.5 mm |
| D. | 2.0 mm |
| Answer» E. | |
| 582. |
The slender beam used in benkleman beam method is ___________ |
| A. | 3.5 m |
| B. | 3.66 m |
| C. | 3.8 m |
| D. | 3.7 m |
| Answer» C. 3.8 m | |
| 583. |
User feedback is got from the ______________ |
| A. | Development platform |
| B. | Integration platform |
| C. | Acceptance platform |
| D. | Stress test platform |
| Answer» D. Stress test platform | |
| 584. |
The _____________ exercises the application under load and verifies that it scales correctly. |
| A. | Development platform |
| B. | Integration platform |
| C. | Acceptance platform |
| D. | Stress test platform |
| Answer» E. | |
| 585. |
On the development platform, _________ unit tests are executed. |
| A. | Acceptance |
| B. | Lossless |
| C. | Logic |
| D. | Functional |
| Answer» D. Functional | |
| 586. |
Eliminating duplication ensures that code is written that’s not only testable but also_____________ |
| A. | Erasable |
| B. | Maintainable |
| C. | Upgradeable |
| D. | Changeable |
| Answer» C. Upgradeable | |
| 587. |
When the _________ is used as the method’s first client, it becomes easier to focus purely on the API. |
| A. | Object |
| B. | Class |
| C. | Test |
| D. | Stub |
| Answer» D. Stub | |
| 588. |
___________ is favoured over conditionals to better write testable code. |
| A. | Polymorphism |
| B. | Composition |
| C. | Inheritance |
| D. | Overloading |
| Answer» B. Composition | |
| 589. |
The line that marks the limits of the drainage area is always _______ degrees to contour lines. |
| A. | 45 |
| B. | 90 |
| C. | 180 |
| D. | 0 |
| Answer» C. 180 | |
| 590. |
The Contour maps are useful to determine the intersection of surfaces and measurements of earthwork. |
| A. | True |
| B. | False |
| Answer» B. False | |
| 591. |
The line that marks the limits of drainage area has the following characteristics it passes through every ridge or saddle that divides the drainage area from other areas. |
| A. | True |
| B. | False |
| Answer» B. False | |
| 592. |
Contour maps are used for the measurement of drainage areas. |
| A. | True |
| B. | False |
| Answer» B. False | |
| 593. |
From a given contour plan, the section along any given direction can be drawn to know the ______ |
| A. | Compressive strength of soil |
| B. | General shape of ground |
| C. | Density of soil |
| D. | Type of soil |
| Answer» C. Density of soil | |
| 594. |
In case of submerged orifice the discharge is substantially dependent on temperature of fluid |
| A. | True |
| B. | False |
| Answer» C. | |
| 595. |
The discharge rate is independent of the height difference and dependent only on the height. |
| A. | True |
| B. | False |
| Answer» C. | |
| 596. |
The time taken to empty the tank is independent of Cd but depends only on the height and acceleration due to gravity. |
| A. | True |
| B. | False |
| Answer» C. | |
| 597. |
A rectangular orifice of 2 m width and 1.2 m deep is fitted in one side of large tank. The easier level on one side of the orifice is 3m above the top edge of the orifice while on the other side of the orifice the water level is 0.5 m below it’s top edge. Calculate discharge if Cd = .64 |
| A. | 4.95 m3/s |
| B. | 5.67 m3/s |
| C. | 3.56 m3/s |
| D. | 6.75 m3/s |
| Answer» B. 5.67 m3/s | |
| 598. |
In case of any orifice, velocity always remains constant and hence discharge can be calculated. |
| A. | True |
| B. | False |
| Answer» C. | |
| 599. |
When is orifice called ‘large orifice’? |
| A. | If the head of liquid is less than 5 times the depth of orifice |
| B. | If the head of liquid is less than 2.5 times the depth of orifice |
| C. | If the head of liquid is less Hence, 4 times the depth of orifice |
| D. | If the head of liquid is less than 1.5 times the depth of orifice |
| Answer» B. If the head of liquid is less than 2.5 times the depth of orifice | |
| 600. |
A Carnot engine, whose sink is at 300 K, has an efficiency of 40%. By how much should the temperature of source be increased, so as to increase the efficiency by 50% of original efficiency? |
| A. | 380 K |
| B. | 275 K |
| C. | 325 K |
| D. | 250 K |
| Answer» E. | |