Explore topic-wise MCQs in Electrical Engineering Questions.

This section includes 180 Mcqs, each offering curated multiple-choice questions to sharpen your Electrical Engineering Questions knowledge and support exam preparation. Choose a topic below to get started.

51.

If a charged rod is brought closer to a gas filled balloon then______________?

A. Radius decreases
B. Balloon bursts
C. Radius increase
D. Balloon squeezes
Answer» D. Balloon squeezes
52.

Electric intensity being a vector quantity always points_______________?

A. along the direction of force experienced by a unit positive charge
B. opposite to the direction of force experienced by a unit positive charge
C. perpendicular to the direction of force experienced by a uit positive charge
D. any of above
Answer» B. opposite to the direction of force experienced by a unit positive charge
53.

A closed surface contains two equal and opposite charges. The net electric flux from the surface will be________________?

A. negative
B. positive
C. zero
D. data is insufficient
Answer» D. data is insufficient
54.

An electric charge at rest produces_______________?

A. only a magnetic field
B. only an electric field
C. neither electric field nor magnetic field
D. both electric and magnetic fields
Answer» C. neither electric field nor magnetic field
55.

The absolute permittivity of free space is given by_____________?

A. 8.854 x 1(T9 F/m)
B. 8.854 x 1(T10 F/m)
C. 8.854 x KT11 F/m
D. 8.854 x 10″12 F/m
Answer» C. 8.854 x KT11 F/m
56.

The value of the capacitance depends upon the________________?

A. voltage applied
B. thickness of the capacitor plates
C. geometry of the capacitor
D. dinsity of the capacitor plates
Answer» D. dinsity of the capacitor plates
57.

Electric intensity at any point in an electric field is equal to the at that point?

A. electric flux
B. magnetic flux density
C. potential gradient
D. none of the above
Answer» D. none of the above
58.

Dielectric strength of a medium is usually expressed in____________?

A. J/mm
B. C/m2
C. kV/mm
D. N/mm
Answer» D. N/mm
59.

To prevent the generation of static charges on rubber or flat leather__________?

A. surface is moistened
B. conductive dressing is done
C. oil compound dressing is done
D. talcum powder is sprayed on the surface
Answer» C. oil compound dressing is done
60.

A gang condenser is a____________?

A. polarised capacitor
B. variable capacitor
C. ceramic capacitor
D. none of the above
Answer» C. ceramic capacitor
61.

The time constant and R-C circuit may also be defined as the time during which the charging current falls to ________ percent of its initial maximum value

A. 37
B. 42
C. 63
D. 73
Answer» B. 42
62.

The unit of capacitance is__________?

A. henry
B. ohm
C. farad
D. farad/m
Answer» D. farad/m
63.

Air capacitors are generally available in the range_________?

A. 10 to 400 pF
B. 1 to 20 pF
C. 100 to 900 pF
D. 20 to 100 pF
Answer» B. 1 to 20 pF
64.

A capacitor charged to 200 V has 2000 (iC of charge. The value of capacitance will be_____________?

A. 10 F
B. 10 uF
C. 100 nF
D. 1000 uF
Answer» C. 100 nF
65.

Paper capacitors usually have a tolerance of___________?

A. ± 5%
B. ± 10%
C. ± 15%
D. ± 20%
Answer» C. ± 15%
66.

A condenser suitable for D.C. only is________?

A. metallic plate variable gang condenser
B. metallic paper capacitor
C. oil impregrated paper condenser
D. poled aluminium electrolytic condenser
Answer» E.
67.

A single core cable used on 33000 V has conductor diameter 10 mm and the internal diameter of sheath 25 mm. The maximum electrostatic stress in the cable is____________?

A. 62 x 105 V/m
B. 72 x 105 V/m
C. 82 x 105 V/m
D. 92 x 105 V/m
Answer» C. 82 x 105 V/m
68.

at a point may be defined as equal to the lines of force passing normally through a unit cross section at that point ?

A. Electric intensity
B. Magnetic flux density
C. Electric flux
D. None of the above
Answer» B. Magnetic flux density
69.

An electrolytic capacitor is generally made to provide__________?

A. low capacitance
B. fixed capacitance
C. variable capacitance
D. large value of capacitance
Answer» E.
70.

capacitors are used for audio frequency and radio frequency coupling and tuning ?

A. Air
B. Mica
C. Plastic film
D. Ceramic
Answer» C. Plastic film
71.

A positive and a negative charge are initially 50 mm apart. When they are moved close together so that they are now only 10 mm apart, the force between them will be________________?

A. 5 times smaller than before
B. 5 times greater than before
C. 10 times greater than before
D. 25 times larger than before
Answer» E.
72.

Which is the most superior dielectric out of the following ?

A. Air
B. Glass
C. Bakelite
D. Paper
Answer» D. Paper
73.

Permittivity is expressed in_____________?

A. Farad/sq-m
B. Farad/meter
C. Weber/meter
D. Weber/sq-m
Answer» C. Weber/meter
74.

When a dielectric is placed in an electric field the field strength____________?

A. decreases
B. increases
C. reduces to zero
D. remain unchanged
Answer» B. increases
75.

Which of the following capacitor is preferred in case of single phase motor ?

A. Mica capacitor
B. Paper capacitor
C. Electrolytic capacitor
D. Ceramic capacitor
Answer» D. Ceramic capacitor
76.

If a third equal and similar charge is placed between two equal and similar charges, then this third charge will_____________?

A. move out of the field of influence of the two charges
B. remain in stable equilibrium
C. not be in equilibrium
D. be in unstable equilibrium
Answer» C. not be in equilibrium
77.

Dielectric strength of a material depends on_____________?

A. moisture content
B. temperature
C. thickness
D. all of the above
E. none of the above
Answer» E. none of the above
78.

Acharge which when placed in vacuum from an equal and similar charge repels with a force of 9 x 10 N, is known as_____________?

A. milli-coulomb
B. micro-coulomb
C. pico-coulomb
D. coulomb
Answer» C. pico-coulomb
79.

If an ohmmeter reading immediately goes practically to zero and stays there, capacitor is___________?

A. charged
B. short-circuited
C. lossy
D. satisfactory
Answer» C. lossy
80.

Which medium has the least dielectric strength ____________?

A. Paraffin wax
B. Quartz
C. Glass
D. Air
Answer» E.
81.

In a cable capacitor, voltage gradient is maximum at the surface of the______________?

A. earth
B. conduction
C. sheath
D. insulator
Answer» C. sheath
82.

A capacitance of 100 fiF is connected in series with a resistance of 8000 £2. The time constant of the circuit is______________?

A. 0.2 s
B. 0.4 s
C. 0.6 s
D. 0.8 s
Answer» E.
83.

1 volt/meter is same as___________?

A. 1 meter/coulomb
B. 1 newton meter
C. 1 newton/meter
D. 1 joule/coulomb
Answer» D. 1 joule/coulomb
84.

The property of a capacitor to store electricity is called its____________?

A. capacitance
B. charge
C. energy
D. none of the above
Answer» B. charge
85.

The relative permittivity has the following units__________?

A. F/m
B. m/F
C. Wb/m
D. no units
Answer» D. no units
86.

The time constant of an R-C circuit is defined as the time during which capacitor charging voltage actually rises to _________ percent of its value

A. 37, initial
B. 62, initial
C. 62, final
D. 37, final
Answer» D. 37, final
87.

Paper condenser is___________?

A. always polarised
B. usually of fixed value
C. electrolytic condenser
D. a variable condenser
Answer» C. electrolytic condenser
88.

A unit tube of flux is known as tube___________?

A. Newton
B. Faraday
C. Michale
D. None of the above
Answer» C. Michale
89.

For closer tolerances which of the following capacitors is usually preferred ?

A. Paper capacitor
B. Mica capacitor
C. Ceramic disc capacitor
D. None of the above
Answer» C. Ceramic disc capacitor
90.

When the dielectric is homogeneous,the potential gradient is_____________?

A. uniform
B. non-uniform
C. zero
D. any of the above
Answer» B. non-uniform
91.

If a 6 uF capacitor is charged to 200 V, the charge in coulombs will be____________?

A. 800 uC
B. 900 uC
C. 1200 uC
D. 1600 uC
Answer» D. 1600 uC
92.

capacitors are used in transistor circuits?

A. Ceramic
B. Paper
C. Air
D. Electrolytic
Answer» B. Paper
93.

The potential gradient across the material of low permittivity is than across the material of high permittivity?

A. smaller
B. greater
C. both (A) and (B)
D. none of the above
Answer» C. both (A) and (B)
94.

The inverse of capacitance is called_______________?

A. reluctance
B. conductance
C. susceptance
D. elastance
Answer» E.
95.

When 4 volts e.m.f. is applied across a 1 farad capacitor, it will store energy of_____________?

A. 2 joules
B. 4 joules
C. 6 joules
D. 8 joules
Answer» E.
96.

The total deficiency or excess of electrons in a body is known as____________?

A. current
B. voltage
C. potential gradient
D. charge
Answer» E.
97.

Dielectric constant for mica is nearly_____________?

A. 200
B. 100
C. 3 to 8
D. 1 to 2
Answer» D. 1 to 2
98.

Which of the following material has least value of dielectric constant ?

A. Ceramics
B. Oil
C. Glass
D. Paper
Answer» C. Glass
99.

The value of dielectric constant for vacuum is taken as____________?

A. zero
B. 1
C. 4
D. 10
Answer» C. 4
100.

Which of the following statements is incorrect ?

A. The thinner the dielectric, the more the capacitance and the lower the voltage breakdown rating for a capacitor
B. A six dot mica capacitor colour coded white, green, black, red and yellow has the capacitance value of 500 pF
C. Capacitors in series provide less capacitance but a higher voltage breakdown rating for the combination
D. A capacitor can store charge because it has a dielectric between two conductors
Answer» C. Capacitors in series provide less capacitance but a higher voltage breakdown rating for the combination