Explore topic-wise MCQs in Electrical Engineering Questions.

This section includes 69 Mcqs, each offering curated multiple-choice questions to sharpen your Electrical Engineering Questions knowledge and support exam preparation. Choose a topic below to get started.

1.

Which of the following affect greatly the resistivity of electrical conductors ?

A. Composition
B. Pressure
C. Size
D. Temperature
Answer» B. Pressure
2.

Total number of crystal systems is____________?

A. 2
B. 4
C. 7
D. 12
Answer» D. 12
3.

Thermonic emission occurs in______________?

A. vacuum tubes
B. copper conductors
C. ferrite cores
D. transistors
Answer» B. copper conductors
4.

Thermocouples are mainly used for the measurement of_____________?

A. temperature
B. resistance
C. eddy currents
D. coupling co-efficient
Answer» B. resistance
5.

The value of critical field below the transition temperature will_______________?

A. increase
B. decrease
C. remain unchanged
D. any of the above
Answer» B. decrease
6.

The transition temperature of mercury is____________?

A. 18.0°K
B. 9.22°K
C. 4.12°K
D. 1.14’K
Answer» D. 1.14’K
7.

The tiny block formed by the arrangement of a small group of atoms is called the____________?

A. unit cell
B. space lattice
C. either A. or (b)
D. none of the above
Answer» B. space lattice
8.

The superconductivity is due to____________?

A. the crystal structure having no atomic vibration at 0°K
B. all electrons interact in the super-conducting state
C. the electrons jump into nucleus at 0°K
D. none of the above
Answer» B. all electrons interact in the super-conducting state
9.

The structure sensitive property of a super conductor is______________?

A. critical magnetic field
B. transition temperature
C. critical current density
D. none of the above
Answer» D. none of the above
10.

The resistivity of a metal is a function of temperature because_____________?

A. the amplitude of vibration of the atoms varies with temperature
B. the electron density varies with temperature
C. the electron gas density varies with temperature
Answer» B. the electron density varies with temperature
11.

The photo-electric effect occurs only when the incident light has more than a certain critical____________?

A. intensity
B. speed
C. frequency
D. wave length
Answer» D. wave length
12.

The number of atoms per unit cell in B.C.C. structure is_____________?

A. 1
B. 2
C. 4
D. 8
Answer» C. 4
13.

The minority carrier concentration is largely a function of_____________?

A. forward biasing voltage
B. reverse biasing voltage
C. temperature
D. the amount of doping
Answer» D. the amount of doping
14.

The metal having the lowest temperature coefficient of resistance is_________________?

A. gold
B. copper
C. aluminium
D. kanthal
Answer» B. copper
15.

The kinetic energy of a bounded electron is______________?

A. less than that of unbounded electron
B. greater than that of unbounded electron
C. equal to that of unbounded electron
D. infinite
E. none of the above
Answer» B. greater than that of unbounded electron
16.

The impurity atoms is semiconductors_____________?

A. inject more charge carriers
B. reduce the energy gap
C. increase the kinetic energy of valence electrons
D. all of the above
Answer» C. increase the kinetic energy of valence electrons
17.

The formula __________ determines the number of electrons that can be accommodated in any level?

A. 2n2
B. 4n2
C. 2n3
D. 4ns
Answer» B. 4n2
18.

The forbidden gap in an insulator is________________?

A. large
B. small
C. nil
D. any of the above
Answer» B. small
19.

The current due to electron flow in conduction band is the hole current in valence band?

A. equal to
B. less than
C. greater than
D. any of the above
Answer» D. any of the above
20.

The covalent bond is formed by_______________?

A. transfer of electrons between atoms
B. sharing of electrons between atoms
C. sharing of variable number of electrons by a variable number of atoms
D. none of the above
Answer» C. sharing of variable number of electrons by a variable number of atoms
21.

The converse of hardness is known as______________?

A. malleability
B. toughness
C. softness
D. none of the above
Answer» D. none of the above
22.

The conductors have transport phenomena of electrons due to____________?

A. electric field
B. magnetic field
C. electromagnetic field
D. none of the above
Answer» B. magnetic field
23.

The conductivity of an extrinsic semiconductor with temperature________________?

A. decreases
B. increases
C. remains constant
Answer» D.
24.

The conductivity of a metal is determined by____________?

A. the electronic concentration and the mobility of the free electrons
B. the number of valence electrons per atom
C. either (A) or (B)
D. none of the above
Answer» B. the number of valence electrons per atom
25.

The conductivity of a conductor can be increased by_______________?

A. decreasing its temperature
B. increasing its temperature
C. decreasing its vibration
D. increasing its vibration
Answer» B. increasing its temperature
26.

The conduction of electricity, in semiconductors, takes place due to movement of______________?

A. positive ions only
B. negative ions only
C. positive and negative ions
D. electrons and holes
Answer» E.
27.

The coils of D.C. motor starter are wound with wire of_______________?

A. copper
B. kanthal
C. manganin
D. nichrome
Answer» D. nichrome
28.

The co-ordination number of a simple cubic structure is______________?

A. 2
B. 4
C. 6
D. 8
Answer» D. 8
29.

The carbon percentage is least in__________________?

A. low carbon steel
B. wrought iron
C. cast iron
D. malleable iron
Answer» C. cast iron
30.

Platinum is used in_____________?

A. electrical contacts
B. thermocouple
C. heating element in high temperature furnace
D. grids of special purpose vacuum tubes
E. all of the above
Answer» F.
31.

Piezoelectric materials serve as a source of ____________ ?

A. resonant waves
B. musical waves
C. microwaves
D. ultrasonic waves
Answer» E.
32.

Overhead telephone wires are made of_____________?

A. aluminium
B. steel
C. ACSR conductors
D. copper
Answer» C. ACSR conductors
33.

Non-linear resistors______________?

A. produce harmonic distortion
B. follows Ohm’s law at low temperatures only
C. result in non-uniform heating
D. none of the above
Answer» B. follows Ohm’s law at low temperatures only
34.

Most of the common metals have _________ structure?

A. linear
B. hexagonal
C. orthorhombic
D. cubic
Answer» E.
35.

Mercury as an electric contact material is_______________?

A. a liquid
B. a metal
C. a metal liquid
D. a gas
Answer» D. a gas
36.

Low resistivity materials are used in__________?

A. transformer, motor and generator windings
B. transmission and distribution lines
C. house wiring
D. all above applications
Answer» E.
37.

_____________is viscoelastic?

A. Cast-iron
B. Graphite
C. Rubber
D. Glass
Answer» D. Glass
38.

is the property of absorbing moisture from atmosphere_____________?

A. Solubility
B. Viscosity
C. Porosity
D. Hygroscopicity
Answer» E.
39.

__________ is the main constituent of glass?

A. Fe203
B. Si02
C. AI2O3
D. B2O3
Answer» C. AI2O3
40.

___________ is most commonly used for making magnetic recording tape?

A. Silver nitrate
B. Ferric oxide
C. Small particles of iron
D. Silicon-iron
Answer» C. Small particles of iron
41.

_________ is an example of piezoelectric material?

A. Glass
B. Quartz
C. Corrundum
D. Neoprene
Answer» C. Corrundum
42.

is an element used in semiconductors whose atoms have three valence electrons?

A. An acceptor
B. A donor
C. Germanium
D. Silicon
Answer» B. A donor
43.

is a negatively charged particle present in an atom______________?

A. Proton
B. Neutron
C. Electron
D. None of the above
Answer» D. None of the above
44.

__________ is a hard solder?

A. Tin-lead
B. Tin-silver-lead
C. Copper-zinc
D. None of the above
Answer» D. None of the above
45.

In graphite, bonding is____________?

A. covalent
B. metallic
C. Vander Waals
D. Vander Waals and covalent
Answer» E.
46.

In conductors conduction of electricity takes place due to movement of_______________?

A. electrons only
B. positive ions only
C. negative ions only
D. positive and negative ions
E. none of the above
Answer» B. positive ions only
47.

In a superconductor the value of critical density depends upon______________?

A. magnetic field strength
B. temperature
C. either (A) or (B)
D. both (A) and (B)
Answer» E.
48.

In a crystal, an atom vibrates at a frequency determined by_______________?

A. the heat content of the crystal
B. the temperature of the crystal
C. the stiffness of the bonds it makes with neighbors
Answer» D.
49.

If the resistance of a conductor does not vary in accordance with Ohm’s law it is known as____________?

A. non-linear conductor
B. reverse conductor
C. bad-conductor
D. non-conductor
Answer» B. reverse conductor
50.

highest conductivity_____________?

A. lowest temperature co-efficient
B. good mechanical strength
C. good corrosion resistance
D. easy solderable and drawable quality
E. all of the above
Answer» F.