MCQOPTIONS
Saved Bookmarks
MCQOPTIONS
This section includes 173 Mcqs, each offering curated multiple-choice questions to sharpen your Surveying knowledge and support exam preparation. Choose a topic below to get started.
| 51. |
Departmental execution is suitable for small jobs |
| A. | Right |
| B. | Wrong |
| C. | none |
| D. | all |
| Answer» B. Wrong | |
| 52. |
What is organization? |
| A. | Arrangement of persons in business |
| B. | Arrangement of machines on site |
| C. | Arrangement of money for business |
| D. | Arrangement of materials at site |
| Answer» B. Arrangement of machines on site | |
| 53. |
Activity starts from |
| A. | Head event |
| B. | Tail event |
| C. | Dual role event |
| D. | None of the above |
| Answer» C. Dual role event | |
| 54. |
Attendance bonus |
| A. | Direct financial incentive |
| B. | Non financial incentive |
| C. | Indirect financial incentive |
| D. | None of the above |
| Answer» B. Non financial incentive | |
| 55. |
Which of the following is not essential requirement for contract |
| A. | Parties must be competent |
| B. | Should be made by free consent |
| C. | There shall be definite and legal proposal and its acceptance. |
| D. | Both Parties must be citizens of same country |
| Answer» E. | |
| 56. |
Wooden ladders should be inspected at least........... a month. |
| A. | Once |
| B. | Twice |
| C. | Three times |
| D. | Four times |
| Answer» B. Twice | |
| 57. |
Which of the following is not a characteristics of a Good organization? |
| A. | It must have an organization goal |
| B. | It should have proper structure |
| C. | It should be as big as possible |
| D. | It should include all the activities without repeation |
| Answer» D. It should include all the activities without repeation | |
| 58. |
Contract system is suitable for big projects |
| A. | Right |
| B. | Wrong |
| C. | none |
| D. | all |
| Answer» B. Wrong | |
| 59. |
What EMD stands for? |
| A. | Exact money deposit |
| B. | Earnest money deposit |
| C. | Exact money deduction |
| D. | Exact monthly deduction |
| Answer» C. Exact money deduction | |
| 60. |
Special one time reports are information system used by |
| A. | Head of department |
| B. | Top management |
| C. | Supervisor,foreman,clerk |
| D. | None of the above |
| Answer» C. Supervisor,foreman,clerk | |
| 61. |
Timber and plywood should be stacked separately. |
| A. | Agree |
| B. | Disagree |
| C. | none |
| D. | all |
| Answer» B. Disagree | |
| 62. |
Gratuity is |
| A. | Direct financial incentive |
| B. | Non financial incentive |
| C. | Indirect financial incentive |
| D. | None of the above |
| Answer» D. None of the above | |
| 63. |
The construction industry has accounted for about ............% of all deaths due to accident atplace of work |
| A. | 5 |
| B. | 20 |
| C. | 25 |
| D. | 30 |
| Answer» C. 25 | |
| 64. |
SD, mobilization advance and cost of materials given to contractor will be deducted from |
| A. | RA bill |
| B. | Final bill |
| C. | EMD |
| D. | None of the above |
| Answer» B. Final bill | |
| 65. |
What is 4M of construction? |
| A. | 4 types of organizations |
| B. | 4 resources for construction |
| C. | 4 types of construction managers |
| D. | 4 types of construction managers |
| Answer» C. 4 types of construction managers | |
| 66. |
Which are the criteria to be checked for pre- qualification of contractor |
| A. | Financial strength |
| B. | Past five year experience |
| C. | Technical personnel engaged |
| D. | All of the above |
| Answer» E. | |
| 67. |
Meritorious service awards is |
| A. | Direct financial incentive |
| B. | Non financial incentive |
| C. | Indirect financial incentive |
| D. | None of the above |
| Answer» C. Indirect financial incentive | |
| 68. |
Trade unions are voluntary organisations formed by laborers to protect their interest |
| A. | Agree |
| B. | Disagree |
| C. | none |
| D. | all |
| Answer» B. Disagree | |
| 69. |
Which of the following is not a components of the system. |
| A. | Inputs |
| B. | Outputs |
| C. | Processing devices |
| D. | Decision making |
| Answer» E. | |
| 70. |
A dummy activity in a network |
| A. | Is represented by dotted line |
| B. | Is an artificial activity |
| C. | Does not consume time and resources |
| D. | All of the above |
| Answer» E. | |
| 71. |
Full width of road should be taken for bituminous work at a time so that job is completed intime. |
| A. | Agree |
| B. | Disagree |
| C. | none |
| D. | all |
| Answer» C. none | |
| 72. |
Which of the following is not a purpose of making job layout |
| A. | To develop human resources in organization |
| B. | To save time of delivery of material |
| C. | To safeguard material from wastage and theft |
| D. | To keep lead minimum |
| Answer» B. To save time of delivery of material | |
| 73. |
Which of the following is not a principle of preparing job layout |
| A. | Location of auditorium |
| B. | Administrative block |
| C. | Warehouses/godown |
| D. | Entry and Exit |
| Answer» B. Administrative block | |
| 74. |
Positive, warm and committed attitude enhances |
| A. | Project duration |
| B. | Team effort |
| C. | Attitude |
| D. | Nature |
| Answer» C. Attitude | |
| 75. |
Which of the following is not role of contractor |
| A. | To arrange land |
| B. | To provide resources as per condition of contract |
| C. | To work as per plans and specifications |
| D. | To put RA and final bill and bill for extra item |
| Answer» B. To provide resources as per condition of contract | |
| 76. |
For work at height one should use |
| A. | Safety belt |
| B. | Full body harness |
| C. | none |
| D. | all |
| Answer» C. none | |
| 77. |
A drawback of bar chart is that |
| A. | All the activities are independent |
| B. | It is difficult to know whether activity is completed or not |
| C. | The sequence of activity is not clearly defined |
| D. | All of the above |
| Answer» D. All of the above | |
| 78. |
The coarse aggregates of different sizes like 5 to 10 mm, 10 to 20 mm, 20 to 40 mm etc. shouldbe stored in different piles. |
| A. | Agree |
| B. | Disagree |
| C. | none |
| D. | all |
| Answer» B. Disagree | |
| 79. |
The earliest method of project planning was |
| A. | CPM |
| B. | PERT |
| C. | Bar chart |
| D. | Mile stone chart |
| Answer» D. Mile stone chart | |
| 80. |
PPE stands for |
| A. | Personal protective equipment |
| B. | Preferred protective equipment |
| C. | Prohibited protective equipment |
| D. | None of the above |
| Answer» B. Preferred protective equipment | |
| 81. |
HRD is a process which progresses by |
| A. | Proper management of resource |
| B. | customer satisfaction |
| C. | Time resource optimization |
| D. | Performance appraisal,Counseling and training |
| Answer» E. | |
| 82. |
The notice inviting tender should published in minimum........ daily news paper |
| A. | 3 |
| B. | 2 |
| C. | 4 |
| D. | 5 |
| Answer» C. 4 | |
| 83. |
Human resource is a |
| A. | Perishable resource |
| B. | Dynamic resource |
| C. | Both A and B |
| D. | None of the above |
| Answer» D. None of the above | |
| 84. |
Which of the following is/are advantages of item rate contract |
| A. | Elasticity and fair to both the parties |
| B. | Economical |
| C. | Absence of uncertainties |
| D. | All of the above |
| Answer» E. | |
| 85. |
Strategic Planning is responsibility of |
| A. | Head of department |
| B. | Top management |
| C. | Supervisor |
| D. | MIS |
| Answer» C. Supervisor | |
| 86. |
In which type of tender advantage of keen bidding competition can be availed. |
| A. | Open tender or public tender |
| B. | Selected tender |
| C. | Negotiated tender |
| D. | None of the above |
| Answer» B. Selected tender | |
| 87. |
Which of the following is/are disadvantage/s of Line and Staff organization? |
| A. | Experts may not have authority to work properly. |
| B. | Conflict between line and staff persons |
| C. | Increase in overhead cost due to high salary of staff |
| D. | All of the Above |
| Answer» E. | |
| 88. |
Mobilization advance |
| A. | Shall be 2 to 5 % of project cost. |
| B. | Shall be 3 to 7 % of project cost. |
| C. | Shall be 10 to 15 % of project cost. |
| D. | Shall be 12 to 18 % of project cost. |
| Answer» B. Shall be 3 to 7 % of project cost. | |
| 89. |
Form no .........is used for material at site account |
| A. | 35 |
| B. | 28 |
| C. | 16 |
| D. | 9 |
| Answer» B. 28 | |
| 90. |
While using ladder one should not lean sideways more than......... cms. |
| A. | 40 |
| B. | 60 |
| C. | 30 |
| D. | 45 |
| Answer» D. 45 | |
| 91. |
The first Trade union Act in India was passed in |
| A. | 1926 |
| B. | 1942 |
| C. | 1920 |
| D. | 1914 |
| Answer» B. 1942 | |
| 92. |
Human resource development (HRD) is a |
| A. | Process |
| B. | Previlege |
| C. | Business cycle |
| D. | None of the above |
| Answer» B. Previlege | |
| 93. |
In which of the following stages contract documents are prepared? |
| A. | Planning stage |
| B. | Briefing stage |
| C. | Construction stage |
| D. | None of the above |
| Answer» E. | |
| 94. |
MIS stands for |
| A. | Management Innovation System |
| B. | Management Information System |
| C. | Management Interaction style |
| D. | None of the above |
| Answer» C. Management Interaction style | |
| 95. |
CITU stands for |
| A. | Centre of Industrial Trade Union |
| B. | Centre of Innovative Trade Union |
| C. | Centre of Indian Trade Union |
| D. | None of the above |
| Answer» D. None of the above | |
| 96. |
Excavated material should be kept nearby from the edge of the trench |
| A. | Agree |
| B. | Disagree |
| C. | none |
| D. | all |
| Answer» C. none | |
| 97. |
Contract is terminated in case of |
| A. | Slow progress and time limit exceeds |
| B. | Work is not being executed as per specifications and instruction of EIC |
| C. | Contractor tries to admit sub-contractor |
| D. | All of the above |
| Answer» E. | |
| 98. |
Bar chart is also known as |
| A. | Flow chart |
| B. | Time chart |
| C. | Travel chart |
| D. | Gantt chart |
| Answer» E. | |
| 99. |
Tests for performance of construction is done in |
| A. | Planning stage |
| B. | Briefing stage |
| C. | Construction stage |
| D. | Commissioning stage |
| Answer» E. | |
| 100. |
The float of critical activity is always |
| A. | Maximum |
| B. | Minimum |
| C. | Zero |
| D. | None of the above |
| Answer» D. None of the above | |