Explore topic-wise MCQs in Technical Programming.

This section includes 1088 Mcqs, each offering curated multiple-choice questions to sharpen your Technical Programming knowledge and support exam preparation. Choose a topic below to get started.

901.

A temporary storage area, attached to the CPU, for I/O operations is a:

A. chip
B. buffer
C. register
D. core
Answer» C. register
902.

Which of the following is not true of immediate processing?

A. It is often used in real-time applications
B. It can occur with either sequential of direct-access files
C. . It can be used in an airline-reservation system
D. Transactions are processed shortly after a real-world event occurs
Answer» C. . It can be used in an airline-reservation system
903.

The main purpose of time sharing techniques used in computers is to make the best use of the

A. CPU
B. peripherals
C. seconday storage
D. floppy disks
Answer» B. peripherals
904.

Which of the following memory is capable of operating at electronics speed?

A. Semiconductor memory
B. Magnetic disks
C. Magnetic drums
D. Magnetic tapes
Answer» B. Magnetic disks
905.

To locate a data item for storage is

A. Field
B. Feed
C. Database
D. Fetch
Answer» E.
906.

Which of the following devices can be used to directly input printed text?

A. OCR
B. OMR
C. MICR
D. All of the above
Answer» B. OMR
907.

The daily processing of corrections to customer accounts best exemplifies the processing mode of:

A. Batch processing
B. Real-time processing
C. Time-sharing
D. Offline processing
Answer» B. Real-time processing
908.

An AND gate

A. implements logic addition
B. is equivalent to a series switching circuit
C. is an any or all gate
D. . is equivalent to a parallel switching circuit
Answer» C. is an any or all gate
909.

A memory bus is mainly used for communication between

A. processor and memory
B. processor and I/O devices
C. I/O devices and memory
D. input device and output device
Answer» B. processor and I/O devices
910.

The memory sizes in mainframe computers and advanced technology micro computers are expressed as

A. Bytes
B. Kilo-bytes
C. Bits
D. Megabytes
Answer» E.
911.

The transistorized computer circuits were introduced in the

A. First generation
B. Second generation
C. Third generation
D. Fourth generation
Answer» C. Third generation
912.

When did arch rivals IBM and Apple Computers Inc. decide to join hands?

A. 1978
B. 1984
C. 1990
D. 1991
Answer» E.
913.

A computer system consisting of its processor, memory and I/O devices accepts data, processes it and produces the output results. Can you tell in which component is the raw data fed?

A. Mass Memory
B. Main memory
C. Logic unit
D. Arithmetic unit
Answer» C. Logic unit
914.

Fifth generation computers are likely to exhibit

A. artificial intelligence
B. heuristic behaviour
C. advanced parallel processing
D. All of the above
Answer» E.
915.

The central processor of a modern digital computer consists of

A. control unit
B. primary memory
C. control unit and primary memory
D. All of the above
Answer» D. All of the above
916.

The bubbles in a bubble memory pack are created with the help of?

A. Laser beam
B. Magnetic field
C. Electric field
D. X-ray
Answer» C. Electric field
917.

The function of CPU is

A. to provide a hard copy
B. to read, interpret and process the information and instruction
C. to communicate with the operator
D. to provide external storage of text
Answer» C. to communicate with the operator
918.

Why is the width of the data bus so important to the processing speed of a computer?

A. The narrower it is, the greater the computers processing speed
B. The wider it is, the more data that can fit into main memory
C. The wider it is, the greater the computers processing speed
D. The wider it is, the slower the computers processing speed
Answer» D. The wider it is, the slower the computers processing speed
919.

One byte can be used to encode any integer between 'O' and -inclusive

A. 16
B. 256
C. 128
D. 255
Answer» E.
920.

Storage on PC allows you to store files until something erases it, but memory loses its contents whenever its _____ is lost

A. static
B. disk space
C. power
D. both a and b above
Answer» D. both a and b above
921.

Which of the following registers is loaded with the contents of the memory location pointed by the PC?

A. Memory Address Register
B. Memory Data Register
C. Instruction Register
D. Program Counter
Answer» D. Program Counter
922.

Continuous line drawing are produced using

A. Chain printers
B. Daisy wheel printers
C. Plotters
D. Thermal devices
Answer» D. Thermal devices
923.

The ALU and control unit of most of the microcomputers are combined and manufactured on a single silicon chip. What is it called?

A. Monochip
B. Microprocessor
C. ALU
D. Control Unit
Answer» C. ALU
924.

A small film-plate which is used for microfilming the output from a microcomputer screen is called

A. microfilm
B. microfiche
C. film card
D. COM
Answer» C. film card
925.

What is the name of the logic circuit which can add two binary digits?

A. Full adder
B. Half adder
C. Buffer
D. Register
Answer» C. Buffer
926.

A memory space used for the temporary storage of data is

A. PROM
B. SAM
C. Scratchpad storage
D. Buffer
Answer» D. Buffer
927.

Which of the following is used for serial access storage only?

A. RAM
B. Magnetic tape @
C. Magnetic disk
D. Core memory
Answer» B. Magnetic tape @
928.

What is the main advantage of magnetic core memory over semiconductor RAM memory?

A. more compact and smaller
B. more economical
C. a bit does not have to write after reading
D. non volatile
Answer» E.
929.

Which of the following terminals' output most closely resembles the output produced by a plotter?

A. graphics terminal
B. POS terminal
C. hardcopy terminal
D. all the above
Answer» B. POS terminal
930.

Which is true for the digital computer?

A. It is less accurate than the analog computer
B. It represents the decimal numbers through a string of binary digits
C. It is used primarily in scientific applications
D. Both (a) and (c)
Answer» C. It is used primarily in scientific applications
931.

Which of the following is not used for storage purposes with main frame computers?

A. removable disks
B. fixed disks
C. mass storage systems
D. diskettes
Answer» E.
932.

When was the IBM XT microcomputer released in the market?

A. 1970
B. 1971
C. 1987
D. 1986
Answer» D. 1986
933.

Computer Operators

A. Write computer programs for specific problems
B. Operate the devices which input and output data from the computer
C. Normally require a college degree in computer science
D. All of the above
Answer» C. Normally require a college degree in computer science
934.

Which type device is a piece of equipment that receives information from a CPU?

A. Input
B. Output
C. CPU
D. Memory
Answer» C. CPU
935.

1024 bytes represent a

A. Megabyte
B. Gigabyte
C. Kilobyte
D. None of the above
Answer» D. None of the above
936.

A directly accessible appointment calendar is a feature of a _____ resident package.

A. CPU
B. Memory
C. Buffer
D. ALU
Answer» C. Buffer
937.

A characteristic of card systems is:

A. slowness in processing data
B. using cards as records of transactions
C. needing a larger DP staff
D. all the above
Answer» E.
938.

Which of the following are the two main components of the CPU?

A. control unit and registers
B. registers and main memory
C. control unit and ALU
D. ALU and bus
Answer» D. ALU and bus
939.

The system unit of a personal computer typically contains all of the following except:

A. microprocessor
B. disk controller
C. serial interface
D. modem
Answer» E.
940.

Computer instructions written with the use of English words instead of binary machine code is called

A. Mnemonics
B. Symbolic code
C. Gray code
D. Op-code
Answer» C. Gray code
941.

A computer has a 1024K memory. What does the letter K stand for

A. Kilometre
B. Thousand
C. Kilobyte
D. MB
Answer» D. MB
942.

The time taken for the read/write head to move to the correct track on the magnetic disk is called

A. epoch delay
B. latency delay
C. seek time
D. approach time
Answer» D. approach time
943.

When was punched-card equipment used for the first time to process the British census?

A. 1910
B. 1907
C. 1911
D. 1914
Answer» D. 1914
944.

Who is the creator of the PASCAL language?

A. Niklaus Wirth
B. Dijkstra
C. Donald Knuth
D. Basic Pascal
Answer» B. Dijkstra
945.

The arranging of data in a logical sequence is called:

A. sorting
B. classifying
C. reproducing
D. summarizing
Answer» B. classifying
946.

The access method used for cassette tape is

A. Direct
B. Random
C. Sequential
D. All of the above
Answer» D. All of the above
947.

What is the name of the computer which was first used for programming and playing of music?

A. ELLIAC
B. ENIAC
C. UNIVAC
D. All of the above
Answer» B. ENIAC
948.

The memory which is ultraviolet light erasable and electrically programmable is

A. ROM
B. PROM
C. RAM
D. EPROM
Answer» E.
949.

Which 32-bit microprocessor is used in IBM's PS/2 model-80 computer?

A. 8088
B. 80286
C. 80386
D. 80486
Answer» D. 80486
950.

Who is credited with the idea of using punch cards to control patterns in a weaving machine?

A. Pascal
B. Hollerith
C. Babbage
D. jacquard
Answer» E.