Explore topic-wise MCQs in Computer Science Engineering (CSE).

This section includes 258 Mcqs, each offering curated multiple-choice questions to sharpen your Computer Science Engineering (CSE) knowledge and support exam preparation. Choose a topic below to get started.

201.

The first computer introduced in Nepal was

A. ibm 1400
B. ibm 1401
C. ibm 1402
D. ibm1402
Answer» C. ibm 1402
202.

The value of each bead in heaven is

A. 1
B. 3
C. 5
D. 7
Answer» D. 7
203.

Which is used for manufacturing chips?

A. bus
B. control unit
C. semiconductors
D. a and b only
Answer» D. a and b only
204.

People often call ______ as the brain of computer system

A. control unit
B. arithmetic logic unit
C. central processing unit
D. storage unit
Answer» D. storage unit
205.

A set of flip flops integrated together is called ____

A. counter
B. adder
C. register
D. none of the above
Answer» D. none of the above
206.

The terminal device that functions as a cash register, computer terminal, and OCR reader is the:

A. data collection terminal
B. ocr register terminal
C. video display terminal
D. pos terminal
Answer» E.
207.

Instructions and memory address are represented by

A. character code
B. binary codes
C. binary word
D. parity bit
Answer» C. binary word
208.

If in a computer, 16 bits are used to specify address in a RAM, the number of addresses will be

A. 216
B. 65,536
C. 64k
D. any of the above
Answer» C. 64k
209.

Abacus was the first

A. electronic computer
B. mechanical computer
C. electronic calculator
D. mechanical calculator
Answer» E.
210.

The arranging of data in a logical sequence is called

A. sorting
B. classifying
C. reproducing
D. summarizing
Answer» B. classifying
211.

Before a disk drive can access any sector record, a computer program has to provide the record’s disk address. What information does this address specify?

A. track number
B. sector number
C. surface number
D. all of above
Answer» E.
212.

Today’s computer giant IBM was earlier known by different name which was changes in 1924. What was that name?

A. tabulator machine co.
B. computing tabulating recording co.
C. the tabulator ltd.
D. international computer ltd.
Answer» C. the tabulator ltd.
213.

Software in computer

A. enhances the capabilities of the hardware machine
B. increase the speed of central processing unit
C. both of above
D. none of above
Answer» B. increase the speed of central processing unit
214.

The digital computer was developed primarily in

A. ussr
B. japan
C. usa
D. uk
Answer» D. uk
215.

Which of the following is not processing?

A. arranging
B. manipulating
C. calculating
D. gathering
Answer» E.
216.

An application suitable for sequential processing is

A. processing of grades
B. payroll processing
C. both a and b
D. all of above
Answer» D. all of above
217.

Computers with 80286 microprocessor is

A. xt computer
B. at comptuers
C. ps/2 computer
D. none of above
Answer» C. ps/2 computer
218.

Which of the following produces the best quality graphics reproduction?

A. laser printer
B. ink jet printer
C. plotter
D. dot matrix printer
Answer» D. dot matrix printer
219.

When was vacuum tube invented?

A. 1900
B. 1906
C. 1910
D. 1880
Answer» C. 1910
220.

A modern electronic computer is a machine that is meant for

A. doing quick mathematical calculations
B. input, storage, manipulation and outputting of data
C. electronic data processing
D. performing repetitive tasks accurately
Answer» C. electronic data processing
221.

Regarding a VDU, Which statement is more correct?

A. it is an output device
B. it is an input device
C. it is a peripheral device
D. it is hardware item
Answer» D. it is hardware item
222.

A technique used by codes to convert an analog signal into a digital bit stream is known as

A. pulse code modulation
B. pulse stretcher
C. query processing
D. queue management
Answer» B. pulse stretcher
223.

Magnetic disks are the most popular medium for

A. direct access
B. sequential access
C. both of above
D. none of above
Answer» E.
224.

In most IBM PCs, the CPU, the device drives, memory expansion slots and active components are mounted on a single board. What is the name of this board?

A. motherboard
B. breadboard
C. daughter board
D. grandmother board
Answer» B. breadboard
225.

In most of the IBM PCs, the CPU, the device drivers, memory, expansion slots and active components are mounted on a single board. What is the name of the board?

A. motherboard
B. daughterboard
C. bredboard
D. fatherboard
Answer» B. daughterboard
226.

The accuracy of the floating-point numbers representable in two 16-bit words of a computer is approximately

A. 16 digits
B. 6 digits
C. 9 digits
D. all of above
Answer» C. 9 digits
227.

Which of the following is not an input device?

A. ocr
B. optical scanners
C. voice recognition device
D. com (computer output to microfilm)
Answer» E.
228.

A high quality CAD system uses the following for printing drawing and graphs

A. dot matrix printer
B. digital plotter
C. line printer
D. all of the above
Answer» C. line printer
229.

High density double sided floppy disks could store _____ of data

A. 1.40 mb
B. 1.44 gb
C. 1.40 gb
D. 1.44 mb
Answer» E.
230.

A physical connection between the microprocessor memory and other parts of the microcomputer is known as

A. path
B. address bus
C. route
D. all of the above
Answer» C. route
231.

Which computer was considered the first electronic computer until 1973 when court invalidated the patent?

A. eniac
B. mark i
C. z3
D. abc
Answer» B. mark i
232.

Which of the following storage devices can store maximum amount of data?

A. floppy disk
B. hard disk
C. compact disk
D. magneto optic disk
Answer» C. compact disk
233.

What was the computer invented by Attanasoff and Clifford?

A. mark i
B. abc
C. z3
D. none of above
Answer» C. z3
234.

Which of the following was a special purpose computer?

A. abc
B. eniac
C. edvac
D. all of the above
Answer» B. eniac
235.

The output quality of a printer is measured by

A. dot per sq. inch
B. dot per inch
C. dots printed per unit time
D. all of the above
Answer» B. dot per inch
236.

One millisecond is

A. 1 second
B. 10th of a seconds
C. 1000th of a seconds
D. 10000th of a seconds
Answer» D. 10000th of a seconds
237.

A dumb terminal has

A. an embedded microprocessor
B. extensive memory
C. independent processing capability
D. a keyboard and screen
Answer» E.
238.

The main electronic component used in first generation computers was

A. transistors
B. vacuum tubes and valves
C. integrated circuits
D. none of above
Answer» C. integrated circuits
239.

Which of the following IC was used in third generation of computers?

A. ssi
B. msi
C. lsi
D. both a and b
Answer» E.
240.

What are the stages in the compilation process?

A. feasibility study, system design and testing
B. implementation and documentation
C. lexical analysis, syntax analysis, and code generation
D. none of the above
Answer» D. none of the above
241.

To produce high quality graphics (hardcopy) in color, you would want to use a/n

A. rgb monitor
B. plotter
C. ink-jet printer
D. laser printer
Answer» C. ink-jet printer
242.

Chief component of first generation computer was

A. transistors
B. vacuum tubes and valves
C. integrated circuits
D. none of above
Answer» C. integrated circuits
243.

The ALU of a computer responds to the commands coming from

A. primary memory
B. control section
C. external memory
D. cache memory
Answer» C. external memory
244.

Which type of computers uses the 8-bit code called EBCDIC?

A. minicomputers
B. microcomputers
C. mainframe computers
D. super computer
Answer» D. super computer
245.

A hybrid computer

A. resembles digital computer
B. resembles analogue computer
C. resembles both a digital and analogue computer
D. none of the above
Answer» D. none of the above
246.

CD-ROM is a

A. semiconductor memory
B. memory register
C. magnetic memory
D. none of above
Answer» E.
247.

Integrated Circuits (Ics) are related to which generation of computers?

A. first generation
B. second generation
C. third generation
D. fourth generation
Answer» D. fourth generation
248.

Computer is free from tiresome and boardoom. We call it

A. accuracy
B. reliability
C. diligence
D. versatility
Answer» D. versatility
249.

A storage area used to store data to a compensate for the difference in speed at which the different units can handle data is

A. memory
B. buffer
C. accumulator
D. address
Answer» C. accumulator
250.

The two kinds of main memory are:

A. primary and secondary
B. random and sequential
C. rom and ram
D. all of above
Answer» D. all of above