Explore topic-wise MCQs in Engineering.

This section includes 5814 Mcqs, each offering curated multiple-choice questions to sharpen your Engineering knowledge and support exam preparation. Choose a topic below to get started.

2301.

Cast iron contains carbon approximately

A. 1.5% to 5.5%
B. 0.05% to 1.75%
C. 0.250%
D. none to these.
Answer» B. 0.05% to 1.75%
2302.

Plastic asphalt is

A. used as a water proofing layer over roof
B. a mixture of cement and asphalt
C. a natural asphalt
D. a refinery product.
Answer» C. a natural asphalt
2303.

For obtaining vinyl chloride acetate, the method used, is

A. addition polymerization
B. condensation polymerization
C. co-polymerization
D. none of these.
Answer» D. none of these.
2304.

The yield strength and tensile strength of low carbon steel may be improved by the addition of

A. manganese
B. chromium
C. nickel
D. venadium
E. tungsten.
Answer» E. tungsten.
2305.

Lime mortar is generally made with

A. quick lime
B. fat lime
C. hydraulic lime
D. plain lime
E. none of these.
Answer» D. plain lime
2306.

Glazing of clay products, is done

A. to improve their appearance
B. to protect them from atmospheric effect
C. to protect them from corrosive action
D. all the above.
Answer» E.
2307.

Sea sand used in structures causes

A. dampness
B. efflorescence
C. disintegration
D. All of these.
Answer» E.
2308.

Duco paints are

A. plastic paints
B. cellulose paints
C. emulsion paints
D. bituminous paints
E. oil paints.
Answer» F.
2309.

The compound of Portland cement which reacts immediately with water and also sets first is

A. Tri-calcium silicate
B. Di-calcium silicate
C. Tri-calcium aluminate
D. Tetra calcium alumino ferrite.
Answer» D. Tetra calcium alumino ferrite.
2310.

Durability of building stone is affected by its

A. chemical composition
B. texture
C. resistance to atmosphere
D. location in structure
E. all the above.
Answer» F.
2311.

Magnese steels

A. are non-magnetic
B. possess high electrical resistance
C. possess low coefficient of expansion
D. are used for the manufacture of rails
E. all the above.
Answer» F.
2312.

According to IS 399-1963, the weight of the timber is specified at

A. 8% moisture content
B. 10% moisture content
C. 12% moisture content
D. 14% moisture content.
Answer» D. 14% moisture content.
2313.

Porcelain is used as :

A. sanitary wares
B. electric insulators
C. storage vessels
D. reactor chambers
E. All of the above.
Answer» F.
2314.

Bitumen may be dissolved in

A. carbondioxide
B. water
C. sodium chloride
D. carbon disulphide
E. none of these.
Answer» E. none of these.
2315.

Based on its dry weight, a freshly felled tree may contain water

A. 25%
B. 50%
C. 75%
D. 100%.
Answer» E.
2316.

The softest rock is

A. marble
B. diamond
C. talc
D. quartz.
Answer» D. quartz.
2317.

Forge pig may be converted to wrought iron by

A. rolling
B. pudding
C. shingling
D. refining.
Answer» C. shingling
2318.

Bitumen completely dissolves in

A. carbon bisulphide
B. chloroform
C. benzol
D. coaltar
E. All of these.
Answer» F.
2319.

Steel contains carbon approximately

A. 1.50% to 5.6%
B. 0.05% to 1.75%
C. 0.25%
D. none to these.
Answer» C. 0.25%
2320.

Refractory bricks resist

A. high temperature
B. chemical action
C. dampness
D. all the above.
Answer» B. chemical action
2321.

The thermosetting plastic

A. becomes rigid when moulded at suitable pressure and temperature
B. at 127 C to 177 C permanently set and further application of heat does not soften it
C. charrs at 343 C
D. All the above.
Answer» E.
2322.

The cracks which extend from bark towards the sap wood in the cross section of a tree, are called

A. radial shakes
B. star shakes
C. heart shakes
D. cup shakes.
Answer» C. heart shakes
2323.

Snowcrete is one of the patent forms of

A. distempers
B. water proof cement paints
C. enamel paints
D. cellulose paints.
Answer» C. enamel paints
2324.

Pick up the synthetic resin from the following:

A. Malamine resin
B. Phenolic resin
C. Resorcinol resin
D. Urea resin
E. All of these.
Answer» F.
2325.

The weight of a good quality brick when immersed in water for a period of 16 hours should not exceed the weight of dry brick

A. 20%
B. 15%
C. 10%
D. None of these.
Answer» B. 15%
2326.

The usual percentages of clay and metal in cermet are :

A. 50%, 50%
B. 60%, 40%
C. 70%, 30%
D. 80%, 20%.
Answer» E.
2327.

The steel used for rails under heavy traffic and on sharp curves, is

A. Nickel steel
B. Chrome steel
C. Magnese steel
D. Vanadium steel.
Answer» D. Vanadium steel.
2328.

The percentage of water for normal consistency, is

A. 5% to 15%
B. 10% to 25%
C. 15% to 25%
D. 20% to 30%
E. 25% to 35%.
Answer» F.
2329.

The initial setting time of hydraulic lime, is

A. 30 minutes
B. 60 minutes
C. 90 minutes
D. 120 minutes
E. 150 minutes.
Answer» E. 150 minutes.
2330.

PVC stands for

A. plastic very compact
B. polythene vinyl chloride
C. polythene vinyl carbon
D. polythene vanadium carbide.
Answer» C. polythene vinyl carbon
2331.

Generally wooden moulds are made from

A. ply wood
B. shisham wood
C. deodar wood
D. teak wood
E. hard wood.
Answer» C. deodar wood
2332.

Water paint is a

A. white wash
B. colour wash
C. whiting
D. distemper
E. all the above.
Answer» F.
2333.

The specific gravity of marble, is

A. 2.50
B. 2.60
C. 2.66
D. 2.72
E. 3.00.
Answer» E. 3.00.
2334.

Putty is

A. made with finely powdered chalk and linseed oil
B. used for fixing glass panes
C. softened by a solution of pearl ash and quick-lime soaked in water
D. all the above.
Answer» E.
2335.

The commonly used drying oil for oil paints, is

A. olive oil
B. linseed oil
C. kerosine oil
D. accetate of lead.
Answer» E.
2336.

Initial setting of cement is caused due to

A. Tri-calcium silicate
B. Di-calcium silicate
C. Tri-calcium aluminate
D. Tetra calcium alumino ferrite.
Answer» D. Tetra calcium alumino ferrite.
2337.

The foliated structure is very common in

A. sedimentary rocks
B. igneous rocks
C. metamorphic rocks
D. none of these.
Answer» D. none of these.
2338.

The rocks in which argil (or clay) predominates, are called

A. sillicious rocks
B. argillaceous rocks
C. calcareous rocks
D. igneous rocks.
Answer» C. calcareous rocks
2339.

A badly mixed cement concrete results in

A. segregation
B. bleeding
C. honey combing
D. none to these.
Answer» D. none to these.
2340.

Pick up the correct statement regarding low heat cement from the following:

A. It possesses less compressive strength
B. Its initial setting time is about one hour
C. Its final setting time is about 10 hours
D. Its mainly used for mass concrete work
E. All the above.
Answer» F.
2341.

The tendency of a stone is, to split along:

A. texture
B. fracture
C. cleavage
D. structure
E. all the above.
Answer» D. structure
2342.

Acrylic is the name of

A. cellulose resin
B. alkyd resin
C. methyl metha crylate
D. cumarone-indene.
Answer» D. cumarone-indene.
2343.

Distemper is

A. a paint consisting of powdered chalk, pigments, and water
B. a water proofing agent
C. a paint consisting of coloured cement and water
D. a drying agent.
Answer» B. a water proofing agent
2344.

Oil varnish generally consists of

A. synthetic resin and spirit
B. oil, wax and resin
C. resin, oil and turpentine
D. spirit, oil and wax.
Answer» D. spirit, oil and wax.
2345.

A piece of timber whose thickness and width are respectively 5 cm and 10 cm is called

A. slate
B. plank
C. board
D. strip.
Answer» E.
2346.

Pig iron is manufactured from the ores by

A. dressing
B. calcination and roasting
C. smelting
D. all the above.
Answer» E.
2347.

Pick up the non-inflammable plastic from the following:

A. Cellulose acetate plastics
B. Polyvinyl chloride plastics
C. Phenol formaldehyde plastic
D. Urea formaldehyde plastic.
Answer» C. Phenol formaldehyde plastic
2348.

Mastic asphalt is

A. acid resisting material
B. non-corrosive material
C. corrosive material
D. heating-resisting material.
Answer» C. corrosive material
2349.

Which one of the following is used for preparing porcelain

A. clay
B. feldspar
C. quartz
D. minerals
E. All of these.
Answer» F.
2350.

The commonly used base for iron and steel work, is

A. red lead
B. zinc white
C. white lead
D. titanium white.
Answer» B. zinc white