

MCQOPTIONS
Saved Bookmarks
This section includes 1331 Mcqs, each offering curated multiple-choice questions to sharpen your Chemical Engineering knowledge and support exam preparation. Choose a topic below to get started.
1251. |
A 'unit process' is exemplified by the |
A. | Distillation |
B. | Hydrogenation of oils |
C. | Absorption |
D. | Humidification |
Answer» C. Absorption | |
1252. |
Le-Blanc process is a primitive process for the manufacture of |
A. | Caustic soda |
B. | Soda ash |
C. | Bromine from sea water |
D. | Hydrochloric acid |
Answer» C. Bromine from sea water | |
1253. |
Double Contact Double Absorption (DCDA) process is the most recent process for the manufacture of |
A. | Nitric acid |
B. | Sulphuric acid |
C. | Ammonium sulphate |
D. | Hydrochloric acid |
Answer» C. Ammonium sulphate | |
1254. |
'Synthesis gas' meant for the synthesis of organic compound is a variable mixture of |
A. | N₂ & H₂ |
B. | CO₂ & H₂ |
C. | CO & H₂ |
D. | C & H₂ |
Answer» D. C & H₂ | |
1255. |
Polyvinyl chloride (PVC) is |
A. | A thermosetting material |
B. | A condensation polymerisation product |
C. | Made by employing emulsion polymerisation |
D. | None of these |
Answer» D. None of these | |
1256. |
Phenol is mainly used |
A. | To produce benzene |
B. | To produce phenol formaldehyde |
C. | To produce polyester resin |
D. | As a plasticiser for unsaturated polyster |
Answer» C. To produce polyester resin | |
1257. |
Pick out the false statement pertaining to water treatment. |
A. | Aeration of water is effective in CO₂ removal |
B. | The zeolite water softening process reduces the hardness of water by not more than 50% |
C. | Sodium sulphate or sodium carbonate do not cause hardness in water |
D. | Water with pH value less than 7, is acidic |
Answer» C. Sodium sulphate or sodium carbonate do not cause hardness in water | |
1258. |
Pick out the true statement pertaining to water treatment. |
A. | Slow sand filters can remove colour completely |
B. | Activated carbon can be used for taste & odour control without subsequent filtration |
C. | Application of activated carbon reduces the temporary hardness of water |
D. | Normally, the turbidity is removed by adding a coagulent prior to sedimentation |
Answer» E. | |
1259. |
Argon is the third largest constituent of air (followed by N₂ & O₂). Its percentage by volume in air is |
A. | 0.14 |
B. | 0.34 |
C. | 0.94 |
D. | 1.4 |
Answer» D. 1.4 | |
1260. |
Cement setting under water employs a/an __________ process. |
A. | Hydration |
B. | Decomposition |
C. | Oxidation |
D. | Reduction |
Answer» B. Decomposition | |
1261. |
Plaster of Paris is |
A. | CaSO₄.½H₂O |
B. | Used for setting of broken bones |
C. | Both A and B |
D. | Same as gypsum |
Answer» D. Same as gypsum | |
1262. |
Phthalic anhydride is used |
A. | In making PVC |
B. | As plasticisers |
C. | In insecticides manufacture |
D. | For making nylon-6 |
Answer» C. In insecticides manufacture | |
1263. |
Pasteurisation of milk means |
A. | Removal of fatty and albuminous substance from it |
B. | Killing of organisms present in it by heating it at controlled temperature without changing its natural characteristics |
C. | Inhibiting the growth of micro-organisms without killing them |
D. | None of these |
Answer» C. Inhibiting the growth of micro-organisms without killing them | |
1264. |
Parathion and Malathion are |
A. | Pesticides |
B. | Plasticisers for unsaturated polysters |
C. | Pain-relieving drugs (analgesic) |
D. | Tranquilisers |
Answer» B. Plasticisers for unsaturated polysters | |
1265. |
Purity of oxygen used for blowing in steel making L.D. converter is 99.5%. The boiling point of oxygen is about __________ °C. |
A. | -53 |
B. | -103 |
C. | -183 |
D. | -196 |
Answer» D. -196 | |
1266. |
Oxygen is separated by distillation from air after its liquefaction. The boiling point of oxygen is about __________ °C. |
A. | -83 |
B. | -183 |
C. | -196 |
D. | -218 |
Answer» C. -196 | |
1267. |
Sea water contains about __________ ppm of bromine. |
A. | 5 |
B. | 70 |
C. | 500 |
D. | 1700 |
Answer» C. 500 | |
1268. |
Hydrogen gas is not produced commercially (for nitrogeneous fertiliser manufacture) by |
A. | Iron-steam reaction |
B. | Electrolysis of water |
C. | Steam reforming of naphtha |
D. | Its cryogenic separation from coke oven gas |
Answer» B. Electrolysis of water | |
1269. |
Phosphoric acid is prepared from |
A. | Cryolite |
B. | Chalcopyrite |
C. | Rock phosphate |
D. | None of these |
Answer» D. None of these | |
1270. |
The most reactive allotropic form of phosphorus is __________ phosphorus. |
A. | Red |
B. | Yellow |
C. | Violet |
D. | Black |
Answer» C. Violet | |
1271. |
Absorption of SO₃ in 97% H₂SO₄ is |
A. | Exothermic |
B. | Endothermic |
C. | Not possible |
D. | None of these |
Answer» B. Endothermic | |
1272. |
Ordinary glass is not a/an |
A. | Amorphous isotropic material |
B. | Supercooled liquid |
C. | Material with sharp definite melting point |
D. | Electrical insulator |
Answer» D. Electrical insulator | |
1273. |
Yeast is used in the manufacture of |
A. | Pencillin |
B. | Antibiotics |
C. | Wine |
D. | Pasteurised milk |
Answer» D. Pasteurised milk | |
1274. |
Fourdrinier machine is used in the manufacture of |
A. | Nylon-6 |
B. | Paper |
C. | Antibiotics |
D. | Sugar |
Answer» C. Antibiotics | |
1275. |
Mannheim furnace is used in the manufacture of |
A. | Hydrochloric acid |
B. | H₂SO₄ by Chamber process |
C. | Calcium carbide |
D. | Corundum |
Answer» B. H₂SO₄ by Chamber process | |
1276. |
Chloral is used in the manufacture of |
A. | DDT |
B. | BHC |
C. | Parathion |
D. | None of these |
Answer» B. BHC | |
1277. |
Zeolite is used in the |
A. | Water treatment |
B. | Glass manufacture |
C. | Hydrogenation of fatty oil as a catalyst |
D. | Development of exposed photographic plate |
Answer» B. Glass manufacture | |
1278. |
Sugar content in sugarcane on cane basis is about __________ percent by weight. |
A. | 1 to 5 |
B. | 5 to 10 |
C. | 15 to 20 |
D. | 20 to 30 |
Answer» C. 15 to 20 | |
1279. |
Common salt is generally not produced commonly by __________ method from brine. |
A. | Freeze drying |
B. | Electrolytic |
C. | Solar evaporation |
D. | Vacuum evaporation |
Answer» B. Electrolytic | |
1280. |
Hydrazine (N₂H₄) is used mainly as a/an |
A. | Explosive |
B. | Rocket fuel |
C. | Detergents additive |
D. | None of these |
Answer» C. Detergents additive | |
1281. |
__________ are used as corrosion inhibitor for iron & steel in aqueous solutions. |
A. | Phosphates |
B. | Chromates |
C. | Sulphates |
D. | Bi-carbonates |
Answer» C. Sulphates | |
1282. |
A mixture of chlorine & sodium bromide acts as a/an |
A. | Insecticides |
B. | Analgesic drug |
C. | Fire retardant |
D. | Hydrogenation catalyst |
Answer» D. Hydrogenation catalyst | |
1283. |
Sucrose is a |
A. | Monosaccharide |
B. | Disaccharide |
C. | Polysaccharide |
D. | None of these |
Answer» C. Polysaccharide | |
1284. |
In an integrated steel plant, NH3 present in coke oven gas is normally recovered as |
A. | (NH4)2SO4 |
B. | NH4Cl |
C. | (NH4)2 NO3 |
D. | Liquid NH3 |
Answer» B. NH4Cl | |
1285. |
Nylon-6 as compared to Nylon-66 is having higher |
A. | Hardness |
B. | Abrasion/resistance |
C. | Melting point |
D. | None of these |
Answer» E. | |
1286. |
Concentration of NaOH solution produced by diaphragm electrolytic cell is about __________ percent. |
A. | 10 |
B. | 25 |
C. | 50 |
D. | 98 |
Answer» B. 25 | |
1287. |
Chemical formula of BHC, which is an insecticide is |
A. | C6H6Cl6 |
B. | C6Cl6 |
C. | C6H5Cl |
D. | C6H4Cl2 |
Answer» C. C6H5Cl | |
1288. |
Cellulose content of bamboo and ideal fibrous raw material for the manufacture of paper is __________ percent. |
A. | 10 |
B. | 50 |
C. | 80 |
D. | 95 |
Answer» C. 80 | |
1289. |
An oil is converted into fat by its |
A. | Hydrogenation |
B. | Hydrolysis |
C. | Hydrocracking |
D. | Hydration |
Answer» B. Hydrolysis | |
1290. |
CO & H2 are the constituents of |
A. | Producer gas |
B. | Water gas |
C. | Coke oven gas |
D. | All (A), (B) and (C) |
Answer» E. | |
1291. |
__________ of quicklime produces slaked lime |
A. | Hydration |
B. | Dehydration |
C. | Hydrogenation |
D. | None of these |
Answer» B. Dehydration | |
1292. |
20% oleum means that in 100 kg oleum, there are 20 kg of |
A. | SO3 and 80kg of H2SO4 |
B. | H2SO4 and 80kg of SO3 |
C. | SO3 for each 100 kg of H2SO4 |
D. | None of these |
Answer» B. H2SO4 and 80kg of SO3 | |
1293. |
Dechlorination of treated water is necessary to |
A. | Remove residual turbidity |
B. | Reduce the bacterial load on filter |
C. | Control taste and odour |
D. | Remove chlorinous taste |
Answer» E. | |
1294. |
Nicotine is |
A. | A volatile alkaloid |
B. | Obtained by treating by-products of the tobacco processing industry |
C. | Both (A) and (B) |
D. | Neither (A) nor (B) |
Answer» D. Neither (A) nor (B) | |
1295. |
Penicillin is made employing __________ fermentation process. |
A. | Continuous |
B. | Aerobic batch |
C. | Anaerobic batch |
D. | None of these |
Answer» C. Anaerobic batch | |
1296. |
Presence of carbonaceous matter in the sewage |
A. | Causes reduction in its dissolved oxygen content thereby endangering the life of aquatic creatures |
B. | Reduces sulphate ions to sulphides causing obnoxious smell |
C. | Increases the quantity of chlorine used for its purification |
D. | All (A), (B) and (C) |
Answer» E. | |
1297. |
Fermentation is adversely affected by the |
A. | Presence of air |
B. | Absence of air |
C. | High concentration |
D. | Presence of ammonium salts |
Answer» D. Presence of ammonium salts | |
1298. |
Lithophane is |
A. | Explosive |
B. | White lead |
C. | Filter aid |
D. | ZnS (white pigment) |
Answer» E. | |
1299. |
In the Solvay process, the product from the calciner is |
A. | Light soda ash |
B. | Dense soda ash |
C. | Sodium bicarbonate |
D. | Dehydrated soda ash |
Answer» B. Dense soda ash | |
1300. |
Phenol formaldehyde |
A. | Employs addition polymerisation |
B. | Employs condensation polymerisation |
C. | Is a monomer |
D. | Is an abrasive material |
Answer» C. Is a monomer | |