Explore topic-wise MCQs in Electrician And Wireman.

This section includes 19 Mcqs, each offering curated multiple-choice questions to sharpen your Electrician And Wireman knowledge and support exam preparation. Choose a topic below to get started.

1.

If the nominal voltage of a given battery is 1.2 V, what is the type cell of used?

A. Lithium ion
B. Lead acid
C. Nickel cadmium
D. Zinc silver oxide
Answer» D. Zinc silver oxide
2.

Leclanche cell is most suited for:

A. Continuous use
B. Large current requirements
C. Intermittent use
D. Large voltage requirements
Answer» D. Large voltage requirements
3.

Dilute sulphuric acid is used as an electrolyte in which of the following battery?

A. Nickel Cadmium
B. Lead Acid
C. Lithium Cells
D. Carbon zinc
Answer» C. Lithium Cells
4.

Current Control Mode is used for _______.

A. Fluctuating Battery Charging
B. Slow Charging
C. Constant Battery Charging
D. Fast Battery Charging
Answer» D. Fast Battery Charging
5.

In a constant voltage charging method of battery, the charging current from discharged to fully charged condition

A. Increases
B. Decreases
C. Remains constant
D. Varies in proportion to charging time
Answer» C. Remains constant
6.

A 12 V battery is rated at 48 AH. If it must deliver an average of 2.0 A, how long will the battery last before it needs recharging

A. 48 hrs
B. 4 hrs
C. 96 hrs
D. 24 hrs
Answer» E.
7.

A 12 V battery is rated for 48 AH. If it must deliver an average of 2A, how long will the battery last before it needs recharging.

A. 48 hours
B. 4 hours
C. 2 hours
D. 24 hours
Answer» E.
8.

If the battery is recharged for a longer period at a low rate called ________

A. Constant current method charging
B. Constant voltage method charging
C. Rectifier method charging
D. Trickle charge method
Answer» E.
9.

A type of electrical battery which can be charged, discharged into a load, and then recharged many times is called ________.

A. Rechargeable battery
B. Secondary battery
C. Primary battery
D. Both 1 and 2
Answer» E.
10.

Consider the following materials:1. Lead peroxide2. Sponge lead3. Dilute sulphuric acidWhich of the above are active materials of a lead-acid battery?

A. 1 and 2 only
B. 1 and 3 only
C. 2 and 3 only
D. 1, 2 and 3
Answer» E.
11.

Battery balancing circuit enhances:

A. Temperature
B. Concentration
C. Pressure
D. Life of battery
Answer» E.
12.

A battery charger acts like a __________.

A. converter
B. rectifier
C. cycloconverter
D. chopper
Answer» C. cycloconverter
13.

In order to increase the ampere-hour rating of a battery, cells are connected in

A. Series
B. Parallel
C. Series parallel
D. Star
Answer» C. Series parallel
14.

A battery of 7.5 V, 4 AH is formed by using cells of 1.5 V, 1 AH, and internal resistance of 0.2 Ω. If a load of 1 Ω is connected across the battery, find the current through it.

A. 1.5 A
B. 5 A
C. 6 A
D. 7.5 A
Answer» D. 7.5 A
15.

Four cells each of 2 V and 4 Ah are connected in parallel, the net voltage of the battery is

A. 0.5 V
B. 2 V
C. 4 V
D. 3 V
Answer» C. 4 V
16.

An alkaline cell is discharged at a steady current of 4A for 12 hours. To restore it to its original state of charge, a steady current of 3A for 20 hours is required. Calculate ah efficiency.

A. 80%
B. 60%
C. 70%
D. 90%
Answer» B. 60%
17.

Electrolyte of a lead-acid battery is formed by adding:

A. Water to hydrochloric acid
B. Sulphuric acid to water
C. Hydrochloric acid to water
D. Water to sulphuric acid
Answer» C. Hydrochloric acid to water
18.

Boost charging is the process of charging on _______.

A. Low current for short time
B. High current for a short time
C. Low current for a long time
D. High current for a long Time
Answer» C. Low current for a long time
19.

Lead-acid cells are ______.

A. rechargeable cells
B. use and throw cells
C. forbidden cells
D. non-rechargeable cells
Answer» B. use and throw cells