MCQOPTIONS
Saved Bookmarks
MCQOPTIONS
This section includes 2374 Mcqs, each offering curated multiple-choice questions to sharpen your Embedded Systems knowledge and support exam preparation. Choose a topic below to get started.
| 901. |
Which type of cement possesses hydraulic qualities? |
| A. | Natural |
| B. | Puzzolona |
| C. | Slag |
| D. | Portland |
| Answer» B. Puzzolona | |
| 902. |
Compute the output voltage for voltage follower with offset voltage compensating network? |
| A. | 3.6v |
| B. | 10.8v |
| C. | 26v |
| D. | 33v |
| Answer» C. 26v | |
| 903. |
Find the maximum possible output offset voltage, which is caused by the input offset voltage Vio=15mv? |
| A. | 0.075v |
| B. | 0.75v |
| C. | 0.75v |
| D. | 7.5v |
| Answer» B. 0.75v | |
| 904. |
How to achieve maximum CMRR in the given circuit? |
| A. | R1 = RF |
| B. | RF = R3|| RC+ RB and R1= R2 |
| C. | R1= R2 and RF= R3+ RC |
| D. | None of the mentioned |
| Answer» D. None of the mentioned | |
| 905. |
Determine the voltage gain for the circuit. |
| A. | 1.1 |
| B. | 1.6 |
| C. | 1.2 |
| D. | 2.2 |
| Answer» E. | |
| 906. |
What happens if R1>>RF in the circuit |
| A. | Some amount of output offset voltage is present |
| B. | Some amount of input offset voltage is present |
| C. | Some amount of gain voltage is present |
| D. | All of the mentioned |
| Answer» B. Some amount of input offset voltage is present | |
| 907. |
________ Will reduces the cost of the devices. |
| A. | Intuitive |
| B. | Voice telephony |
| C. | Voice recognition |
| D. | Voice Integration |
| Answer» E. | |
| 908. |
________ could potentially challenge the need of touch screen on many devices. |
| A. | Voice recognition |
| B. | Voice telephony |
| C. | Voice Integration |
| D. | Intuitive |
| Answer» D. Intuitive | |
| 909. |
Voice telephony is an efficient means of __________ with machines that can listen. |
| A. | Mono-directional voice communication |
| B. | Bi-directional voice communication |
| C. | Voice recognition |
| D. | Both bi directional and mono directional |
| Answer» C. Voice recognition | |
| 910. |
_________ is particularly appealing when the human’s hands or eye are otherwise occupied. |
| A. | Voice recognition |
| B. | Sound recognition |
| C. | Amplitude recognition |
| D. | Frequency recognition |
| Answer» B. Sound recognition | |
| 911. |
Voice control doesn’t provide the level of __________ |
| A. | Amplitude control |
| B. | Sound control |
| C. | Voice control |
| D. | Frequency control |
| Answer» E. | |
| 912. |
_________ either built into smoke alarm and thermostat or in the form of small plug – in. |
| A. | Microphones |
| B. | Loudspeaker |
| C. | Microphone and loudspeaker |
| D. | Mic |
| Answer» B. Loudspeaker | |
| 913. |
_____________ reduces the adoption and learning curve for the end user. |
| A. | Intuitive |
| B. | IoT |
| C. | Commands |
| D. | Devices |
| Answer» B. IoT | |
| 914. |
One application in which the use of plasmid vectors is critical, in the case of mammals is ____________ |
| A. | Stable transformation |
| B. | Transient transformation |
| C. | Transfection |
| D. | Transduction |
| Answer» C. Transfection | |
| 915. |
What are dominant selectable markers? |
| A. | Drug-resistance genes |
| B. | Inducing genes |
| C. | Exogenous genes |
| D. | Endogenous genes |
| Answer» B. Inducing genes | |
| 916. |
Dominant selectable markers can be used with __________ |
| A. | Any cell type |
| B. | Mutant cells |
| C. | Wild-type cells |
| D. | Recombinant cells |
| Answer» B. Mutant cells | |
| 917. |
What happens following the morphogenesis of the cell? |
| A. | Progeny strands release |
| B. | DNA replication |
| C. | Host lysis |
| D. | Degradation |
| Answer» B. DNA replication | |
| 918. |
The RF multiplies ________ |
| A. | Slowly |
| B. | Rapidly |
| C. | Moderately |
| D. | Does not multiply |
| Answer» C. Moderately | |
| 919. |
Before cloning in a P-MUTIN vector, the target gene is __________ |
| A. | Amplified |
| B. | Mitigated |
| C. | Dispersed |
| D. | Restricted |
| Answer» B. Mitigated | |
| 920. |
What is Usability?a) Usability is learnabilityb) Usability is Efficiencyc) Usability is Memorabilityd) All of the mentioned 12.What among the following belongs to learnability? |
| A. | Usability is learnabilityb) Usability is Efficiencyc) Usability is Memorabilityd) All of the mentioned 12.What among the following belongs to learnability?a) Does the system respond with appropriate speed to a user request |
| B. | Usability is Efficiencyc) Usability is Memorabilityd) All of the mentioned 12.What among the following belongs to learnability?a) Does the system respond with appropriate speed to a user requestb) Can the user remember how to do system operations between users of the system |
| C. | Usability is Memorabilityd) All of the mentioned 12.What among the following belongs to learnability?a) Does the system respond with appropriate speed to a user requestb) Can the user remember how to do system operations between users of the systemc) How quick is it for the user to learn to use the system’s interface |
| D. | All of the mentioned 12.What among the following belongs to learnability?a) Does the system respond with appropriate speed to a user requestb) Can the user remember how to do system operations between users of the systemc) How quick is it for the user to learn to use the system’s interfaced) Does the system anticipate and prevent common user error?View Answer |
| Answer» E. | |
| 921. |
What is functionality? |
| A. | Functionality is ability of the system to do work for which it is intended |
| B. | It is orthogonal to structure i.e. it is largely non architectural in nature |
| C. | All of the mentioned |
| D. | None of the mentioned |
| Answer» D. None of the mentioned | |
| 922. |
What is true for availability? |
| A. | Availability comes with both mean time to failure and mean time to repair |
| B. | Mean time to failure is lowered by designing components that are easy to modify |
| C. | Mean time to repair can be lengthened by fielding a less prone system |
| D. | All of the mentioned |
| Answer» E. | |
| 923. |
Which of the following factors are discernable by run-time? |
| A. | Performance |
| B. | Modifiability |
| C. | Portability |
| D. | Integrability |
| Answer» B. Modifiability | |
| 924. |
Which of the following condition will ignore the request to enable delayed durability? |
| A. | DELAYED_DURABILITY = FORCED |
| B. | DELAYED_DURABILITY = 0 |
| C. | DELAYED_DURABILITY = IGNORED |
| D. | DELAYED_DURABILITY = NULL |
| Answer» B. DELAYED_DURABILITY = 0 | |
| 925. |
ROLLBACK WORK always rolls back to the outermost BEGIN TRANSACTION statement for ___________ transactions. |
| A. | Simple |
| B. | Nested |
| C. | Distributed |
| D. | None of the mentioned |
| Answer» C. Distributed | |
| 926. |
Implicit transactions are maintained by SQL Server for ___________ |
| A. | SELECT |
| B. | DDL |
| C. | DML |
| D. | All of the mentioned |
| Answer» E. | |
| 927. |
What is the fundamental difference between COMMIT and COMMIT WORK? |
| A. | COMMIT TRANSACTION accepts a user-defined transaction name |
| B. | COMMIT WORK accepts a user-defined transaction name |
| C. | COMMIT TRANSACTION accepts a user-defined function |
| D. | COMMIT WORK accepts a user-defined stored procedure |
| Answer» B. COMMIT WORK accepts a user-defined transaction name | |
| 928. |
A ROLLBACK TRANSACTION statement specifying a savepoint_name releases any locks that are acquired beyond the savepoint, with the exception of __________ |
| A. | escalations |
| B. | containment |
| C. | contention |
| D. | none of the mentioned |
| Answer» B. containment | |
| 929. |
Which of the following argument is ignored by database engine in COMMIT TRANSACTION? |
| A. | @tran_name_variable |
| B. | @tran_name |
| C. | transaction_name |
| D. | all of the mentioned |
| Answer» B. @tran_name | |
| 930. |
What is the alternative for specifying the vector size in the function? |
| A. | Not using arrays |
| B. | Defining every single element differently |
| C. | Defining a subtype |
| D. | Using bit vector |
| Answer» D. Using bit vector | |
| 931. |
If a function has an operator sign as its name, then what will be the purpose of that function? |
| A. | Conversion |
| B. | Overloading |
| C. | Resolution |
| D. | Define the data type |
| Answer» C. Resolution | |
| 932. |
What is the ease provided by using functions? |
| A. | Easy debugging |
| B. | Easy reading |
| C. | Easy calling |
| D. | Easy implementation |
| Answer» B. Easy reading | |
| 933. |
In the following code, which of the lines corresponds to the function call and function definition? |
| A. | L5, L3 |
| B. | L5, L9 |
| C. | L3, L7 |
| D. | L3, L5View Answer |
| Answer» E. | |
| 934. |
The minimum number of parameters that must be there in a function is ___________ |
| A. | 0 |
| B. | 1 |
| C. | 2 |
| D. | 3 |
| Answer» B. 1 | |
| 935. |
In VHDL it is not possible to use recursive functions. |
| A. | True |
| B. | False |
| Answer» C. | |
| 936. |
For an irrotational flow, the velocity component along z-direction becomes _________ |
| A. | 0 |
| B. | 1 |
| C. | infinity |
| D. | -1 |
| Answer» B. 1 | |
| 937. |
When velocity potential (ϕ) exits, the flow is _________ |
| A. | rotational |
| B. | irrotational |
| C. | laminar |
| D. | turbulent |
| Answer» C. laminar | |
| 938. |
______ gives the velocity component at right angles to a particular direction. |
| A. | velocity |
| B. | velocity vector |
| C. | stream function |
| D. | pressure line |
| Answer» D. pressure line | |
| 939. |
In the source flow, the tangential velocity component is _________ |
| A. | 0 |
| B. | 1 |
| C. | not defined |
| D. | infinity |
| Answer» B. 1 | |
| 940. |
The flow in which streamlines are directed away from the origin is called as __________ |
| A. | sink flow |
| B. | doublet flow |
| C. | source flow |
| D. | source-sink flow |
| Answer» D. source-sink flow | |
| 941. |
What is the code snippet to change the class and let the stylesheet specify the details? |
| A. | timestamp.className = “highlight”; |
| B. | timestamp.className = “change”; |
| C. | timestamp.className = “specify”; |
| D. | timestamp.className = “move”; |
| Answer» B. timestamp.className = “change”; | |
| 942. |
Which of the following is not an object? |
| A. | Element |
| B. | Location |
| C. | Position |
| D. | Window |
| Answer» D. Window | |
| 943. |
What is the property to access the first child of a node? |
| A. | timestamp.Child1 |
| B. | timestamp.Child(1) |
| C. | timestamp.Child(0) |
| D. | timestamp.firstChild |
| Answer» E. | |
| 944. |
If we have an object r and want to know if it is a Range object, we can write ______________ |
| A. | r typeof Range |
| B. | r is Range |
| C. | r equals Range |
| D. | r instanceof Range |
| Answer» E. | |
| 945. |
What will be the work of the getAvg in the following JavaScript function? |
| A. | Multiples values from 0 to 200 |
| B. | Adds values from 0 to 200 |
| C. | Simply traverses with no operation |
| D. | Find the average of 199 numbersView Answer |
| Answer» E. | |
| 946. |
What will be the output of the following JavaScript code? |
| A. | false |
| B. | true |
| C. | 0 |
| D. | 1View Answer |
| Answer» C. 0 | |
| 947. |
What is the purpose of the Math method toSource()? |
| A. | Returns the string “Math” |
| B. | Sends the source to the Math Library |
| C. | Returns the value of the object |
| D. | Returns an integer value |
| Answer» B. Sends the source to the Math Library | |
| 948. |
Which of the following is not a JavaScript framework? |
| A. | Rico |
| B. | Prototype |
| C. | Joco |
| D. | DoJo |
| Answer» E. | |
| 949. |
One of the most important specifications on magnetic media is the ____________ |
| A. | Polarity reversal rate |
| B. | Tracks per inch |
| C. | Data transfer rate |
| D. | Rotation speed |
| Answer» D. Rotation speed | |
| 950. |
The communication between memory and its environment is achieved through ____________ |
| A. | Control lines |
| B. | Data input/output lines |
| C. | Address selection lines |
| D. | All of the Mentioned |
| Answer» E. | |