MCQOPTIONS
Saved Bookmarks
MCQOPTIONS
This section includes 657 Mcqs, each offering curated multiple-choice questions to sharpen your Testing Subject knowledge and support exam preparation. Choose a topic below to get started.
| 1. |
IF_WE_HAVE_AN_OBJECT_R_AND_WANT_TO_KNOW_IF_IT_IS_A_RANGE_OBJECT,_WE_CAN_WRITE:?$ |
| A. | r typeof Range |
| B. | r is Range |
| C. | r equals Range |
| D. | r instanceof Range |
| Answer» D. r instanceof Range | |
| 2. |
IF_A_PLANE_IS_PARALLEL_TO_ONE_OF_THE_REFERENCE_PLANE_THEN_THE_PROJECTION_ONTO_THE_OTHER_REFERENCE_PLANES_WOULD_BE_A_LINE.?$ |
| A. | True |
| B. | False |
| Answer» B. False | |
| 3. |
THE_TERMINATION_OF_A_WALL_IN_SUCH_A_FASHION_THAT_EACH_ALTERNATE_COURSE_AT_THE_END_PROJECTS_IS_KNOWN_AS_THE__________?$ |
| A. | Racking back |
| B. | Tooting |
| C. | Frog |
| D. | Lap |
| Answer» C. Frog | |
| 4. |
WHICH_OF_THESE_IS_FALSE_??$ |
| A. | Terminological consistency is simply using words with same meaning and always using the same words to refer to particular thing |
| B. | A stakeholder goal or need is within the project scope |
| C. | A statement is correct if it is contingent and accords with the facts |
| D. | None of the mentioned |
| Answer» E. | |
| 5. |
STEAM_ENTERS_A_TURBINE_AT_550¬¨ àûC,_25_MPA_AND_EXITS_AT_5_MPA,_325¬¨ àûC_AT_A_FLOW_RATE_OF_70_KG/S._DETERMINE_THE_SECOND_LAW_EFFICIENCY.?$# |
| A. | 0.68 |
| B. | 0.78 |
| C. | 0.88 |
| D. | 0.98 |
| Answer» D. 0.98 | |
| 6. |
CALIFORNIA_IS_THE_LEADING_STATE_IN_PRODUCTION_OF_ICE_CREAM,_WHICH_STATE_WAS_SECOND??$ |
| A. | Texas |
| B. | Indiana |
| C. | Minnesota |
| D. | Colorado |
| Answer» C. Minnesota | |
| 7. |
THE________________IDENTIFIES_THE_DECISION_POINTS_AND_THE_ASSIGNMENTS_ASSOCIATED_WITH_EACH_FLOW.?$ |
| A. | Decision Table |
| B. | Flowgraph |
| C. | Testing Design |
| D. | Audit |
| Answer» C. Testing Design | |
| 8. |
THE_NUMBER_OF_CHIASMA_IN_DIAKINESIS_STAGE__________?$ |
| A. | Increases |
| B. | Decreases |
| C. | Remains same |
| D. | There are no chiasma left |
| Answer» C. Remains same | |
| 9. |
THE_SATURATION_CURRENT_OF_THE_MOSFET_IS_THE_VALUE_OF_THE_CURRENT_WHEN?$ |
| A. | The voltage between the drain and drain becomes equal to the overdrive voltage |
| B. | The voltage between the drain and drain becomes equal to the threshold voltage |
| C. | The voltage between the drain and drain becomes equal to the voltage applied to the gate |
| D. | The voltage between the drain and drain becomes equal to difference the overdrive voltage and the threshold voltage |
| Answer» B. The voltage between the drain and drain becomes equal to the threshold voltage | |
| 10. |
WHICH_OF_THE_FOLLOWING_STATEMENT_GIVES_SAMPLING_INTERVAL_??$ |
| A. | $sampling.interval |
| B. | $sampling.time |
| C. | $sampling.date |
| D. | None of the mentioned |
| Answer» C. $sampling.date | |
| 11. |
WHAT_IS_SCREW_DRYER_SUITABLE_FOR??$ |
| A. | Very thick slurries |
| B. | Materials which are heat sensitive |
| C. | Free flowing granular materials |
| D. | Free flowing slurries |
| Answer» D. Free flowing slurries | |
| 12. |
WHICH_OF_THE_FOLLOWING_FUNCTION_CAN_BE_USED_TO_COMBINE_DIFFERENT_VECTORS_SO_AS_TO_OBTAIN_THE_RESULT_FOR_EACH_N-UPLET??$ |
| A. | iid_ |
| B. | ix_ |
| C. | ixd_ |
| D. | all of the Mentioned |
| Answer» C. ixd_ | |
| 13. |
PL_PROPERTIES_OF_MPSI_AND_‚ÂÀ√≠¬¨‚À´PSI_STRUCTURES_DEPEND_ON______?$# |
| A. | temperature |
| B. | etching conditions |
| C. | light intensity |
| D. | refractive index |
| Answer» C. light intensity | |
| 14. |
WHICH_OF_THE_FOLLOWING_PRODUCES_MAXIMUM_ATP??$ |
| A. | Krebs cycle |
| B. | Glycolysis |
| C. | Fermentation |
| D. | Oxidative Phosphorylation |
| Answer» E. | |
| 15. |
MAXIMUM_RADIUS_OF_GYRATION_(MINIMUM_SLENDERNESS_RATIO)_CAN_BE_OBTAINED_BY?$ |
| A. | by increasing load |
| B. | by spreading material of section towards its axis |
| C. | by spreading material of section away from its axis |
| D. | by spreading material of section at its axis |
| Answer» D. by spreading material of section at its axis | |
| 16. |
SEQUENCE_OF_EAR_OSSCILES_FROM_OUTSIDE_TO_INSIDE_IS_____________?$ |
| A. | Malleus incus stapes |
| B. | Incus stapes Malleus |
| C. | Stapes incus malleus |
| D. | Malleus stapes incus |
| Answer» B. Incus stapes Malleus | |
| 17. |
WHICH_IS_TRUE_IN_INTERFACING_7_SEGMENT_CODE_DISPLAY??$ |
| A. | transmitted by second port |
| B. | display is selected by third port |
| C. | display is selected by second port |
| D. | none of the mentioned |
| Answer» D. none of the mentioned | |
| 18. |
A_STRUCTURE_THAT_IS_SYSTEM-_DEPENDENT.?$ |
| A. | Logical |
| B. | Smart |
| C. | Nano |
| D. | Physical |
| Answer» E. | |
| 19. |
EACH_ROUND_USES_A_DIFFERENT_KEY_IN_THE_ALGORITHM.?$ |
| A. | True |
| B. | False |
| Answer» B. False | |
| 20. |
MOORE_FILTER_IS_A_FILTER_____?$ |
| A. | Leaf |
| B. | Press |
| C. | Rotary |
| D. | Sand |
| Answer» B. Press | |
| 21. |
GYRATORY_SCREENS_ARE_USED_WHEN_IT_IS_A_CONTINUOUS_OPERATION_TO_BE_HANDLED_AND_THE_AMOUNT_OF_MATERIAL_TO_BE_HANDLED_IS_VERY_HIGH.?$ |
| A. | True |
| B. | False |
| Answer» B. False | |
| 22. |
ON_UNIX-LIKE_OPERATING_SYSTEMS,_YOU_START_TERRACOTTA_AS_:-?$ |
| A. | $TERRACOTTA HOME/bin/start-tc-server.sh –f $PATH TO TERRACOTTA CONFIGURATION |
| B. | $TERRACOTTA HOME/bin/start-tc-server.sh –f $PATH TO TERRACOTTA |
| C. | $TERRACOTTA HOME/bin/start-tc-server.sh –f $PATH TO TERRACOTTA bin |
| D. | None of the mentioned |
| Answer» B. $TERRACOTTA HOME/bin/start-tc-server.sh ‚Äö√Ñ√∂‚àö√ë‚àö¬®f $PATH TO TERRACOTTA | |
| 23. |
WE_NEED_TO_OBLIGATORILY_HAVE_VENTILATION_IN_TRIANGULAR_NOTCH.?$ |
| A. | True |
| B. | False |
| Answer» C. | |
| 24. |
HOW_CAN_OUTPUT_BE_UPDATED_IN_NEURAL_NETWORK??$ |
| A. | synchronously |
| B. | asynchronously |
| C. | both synchronously & asynchronously |
| D. | none of the mentioned |
| Answer» D. none of the mentioned | |
| 25. |
HOW_IS_INCREMENTAL_MODEL_DIFFERENT_FROM_SPIRAL_MODEL??$ |
| A. | Progress can be measured for Incremental Model |
| B. | Changing requirements can be accommodated in Incremental Model |
| C. | Users can see the system early in Incremental Model |
| D. | All of the mentioned |
| Answer» B. Changing requirements can be accommodated in Incremental Model | |
| 26. |
THE_VALUE_OF_KS(MODULUS_OF_SUBGRADE_REACTION)_CAN_BE_FOUND_OUT,_BASED_ON_THE_EFFECT_OF___________?$ |
| A. | Size and Shape |
| B. | Properties |
| C. | None of the mentioned |
| D. | All of the mentioned |
| Answer» B. Properties | |
| 27. |
SAMPLING_INTERVAL_T_IS_SELECTED_SUFFICIENTLY_LARGE_TO_COMPLETELY_AVOID_OR_AT_LEAST_MINIMIZE_THE_EFFECTS_OF_ALIASING.?$ |
| A. | True |
| B. | False |
| Answer» C. | |
| 28. |
WHEN_TWO_SPUR_GEARS_HAVING_INVOLUTE_PROFILES_ON_THEIR_TEETH_ENGAGE,_THE_LINE_OF_ACTION_IS_TANGENTIAL_TO_THE?$ |
| A. | pitch circles |
| B. | dedendum circles |
| C. | addendum circles |
| D. | base circles |
| Answer» B. dedendum circles | |
| 29. |
RAKE_ANGLE_OF_DRILL_IS_ALSO_AS?$ |
| A. | Taper angle |
| B. | Friction angle |
| C. | Helix angle |
| D. | None of the mentioned |
| Answer» D. None of the mentioned | |
| 30. |
TOXIN_A_INVOLVED_IN_PSEUDOMEMBRANOUS_COLITIS_IS_A_TYPE_OF________________?$ |
| A. | endotoxin |
| B. | enterotoxin |
| C. | cytotoxin |
| D. | neurotoxin |
| Answer» C. cytotoxin | |
| 31. |
THE_MATHEMATICAL_VALUE_OF_DOWN_COMER_BACKUP_IS??$ |
| A. | h<sub>c</sub> + h<sub>t</sub>+ h<sub>ad</sub> |
| B. | h<sub>c</sub> – h<sub>t</sub>+ h<sub>ad</sub> |
| C. | h<sub>c</sub> – h<sub>t</sub> – h<sub>ad</sub> |
| D. | h<sub>c</sub> + h<sub>t</sub> |
| Answer» B. h<sub>c</sub> ‚Äö√Ñ√∂‚àö√ë‚àö¬® h<sub>t</sub>+ h<sub>ad</sub> | |
| 32. |
WHICH_OF_THE_FOLLOWING_SHORT-CUT_KEY_IS_USEFUL_FOR_MODIFYING_THE_3-DIMENSIONAL_VISUALIZATION_PROPERTIES??$ |
| A. | CTRL + 1 |
| B. | CTRL + 5 |
| C. | CTRL + 3 |
| D. | CTRL + 4 |
| Answer» B. CTRL + 5 | |
| 33. |
LMS_EQUALIZER_MINIMIZES___________?$ |
| A. | Computational complexity |
| B. | Cost |
| C. | Mean square error |
| D. | Power density of output signal |
| Answer» D. Power density of output signal | |
| 34. |
A_CYLINDRICAL_CAVITY_OF_BASE_DIAMETER_15_CM_AND_HEIGHT_20_CM_HAS_INSIDE_SURFACE_TEMPERATURE_650_K._IF_EMISSIVITY_OF_EACH_SURFACE_IS_0.85,_DETERMINE_THE_NET_RADIATIVE_HEAT_TRANSFER_FROM_THE_CAVITY?$ |
| A. | 194 W |
| B. | 184 W |
| C. | 174 W |
| D. | 164 W |
| Answer» D. 164 W | |
| 35. |
WHAT_IS_THE_MAXIMUM_LIMIT_(PPM)_FOR_TURBIDITY_IN_WATER??$ |
| A. | 500 |
| B. | 1000 |
| C. | 2000 |
| D. | 1500 |
| Answer» E. | |
| 36. |
THE__________PUMP_UTILIZES_A_TUBE_IN_THE_SHAPE_OF_A_SEMI-CIRCLE_WITH_2_OR_MORE_PINCHING_ROLLERS_ON_THE_OUTER_EDGE_OF_A_WHEEL_THAT_ROTATES_ON_THE_INSIDE_OF_THE_SEMI-CIRCLE.?$ |
| A. | Gear |
| B. | Teeth |
| C. | Tubing |
| D. | Lobe |
| Answer» D. Lobe | |
| 37. |
A_MECHANISM_FOR_BREAKING_THE_PROBLEM_DOWN_IS?$ |
| A. | Layering |
| B. | Dividing |
| C. | Abstraction |
| D. | Entity sharing |
| Answer» D. Entity sharing | |
| 38. |
IN_THE_PROPORTIONING_PUMP,_TWO_SPEED_PUMP_HAS_A_NON-SYNCHRONOUS_______RPM_MOTOR.?$ |
| A. | 10 rpm |
| B. | 30 rpm |
| C. | 45 rpm |
| D. | 15 rpm |
| Answer» D. 15 rpm | |
| 39. |
WHICH_OF_THE_FOLLOWING_TAKE_PART_IN_RELAXATION_OF_MUSCLES??$ |
| A. | Nebulin |
| B. | Titin |
| C. | Tropomodulin |
| D. | Myomesin |
| Answer» C. Tropomodulin | |
| 40. |
WHICH_OF_THE_FOLLOWING_TRANSITION-TIMING-FUNCTION_PROPERTY_LETS_YOU_DEFINE_YOUR_OWN_VALUES_IN_A_CUBIC-BEZIER_FUNCTION?$ |
| A. | cubic(n,n,n,n) |
| B. | matrix(n,n,n,n) |
| C. | cubic-bezier(n,n,n,n) |
| D. | none of the mentioned |
| Answer» D. none of the mentioned | |
| 41. |
A_ROLLBACK_TRANSACTION_STATEMENT_SPECIFYING_A_SAVEPOINT_NAME_RELEASES_ANY_LOCKS_THAT_ARE_ACQUIRED_BEYOND_THE_SAVEPOINT,_WITH_THE_EXCEPTION_OF:.?$ |
| A. | escalations |
| B. | containment |
| C. | contention |
| D. | None of the mentioned |
| Answer» C. contention | |
| 42. |
HOW_MANY_ASSUMPTIONS_CAN_BE_USED_FOR_THE_SLOT_LEAKAGE_CALCULATION??$ |
| A. | 2 |
| B. | 3 |
| C. | 4 |
| D. | 5 |
| Answer» C. 4 | |
| 43. |
Convergence rate of LMS is fast. State whether True or False.$ |
| A. | True |
| B. | False |
| Answer» C. | |
| 44. |
What is the formula of the effective permeance of conductor portion?$ |
| A. | effective permeance of conductor portion = 1/total flux linkages * total turns * total mmf |
| B. | effective permeance of conductor portion = total flux linkages / total turns * total mmf |
| C. | effective permeance of conductor portion = total flux linkages * total turns * total mmf |
| D. | effective permeance of conductor portion = total flux linkages * total turns / total mmf |
| Answer» C. effective permeance of conductor portion = total flux linkages * total turns * total mmf | |
| 45. |
The volcanic sheets may vertical. State true or false.$ |
| A. | True |
| B. | False |
| Answer» C. | |
| 46. |
Which element increases DBTT of steel?$ |
| A. | Ni |
| B. | Mn |
| C. | Al |
| D. | Mo |
| Answer» E. | |
| 47. |
Corrosion in the pump is developed due to _______$ |
| A. | Pressure of air |
| B. | Fluid properties |
| C. | Draft tube |
| D. | Tank dimensions |
| Answer» C. Draft tube | |
| 48. |
Which path of the components in wire EDM determines the path to be machined?$ |
| A. | Horizontal worktable movement |
| B. | Vertical worktable movement |
| C. | All of the mentioned |
| D. | None of the mentioned |
| Answer» B. Vertical worktable movement | |
| 49. |
________ is controlled by varying ion flux and velocity$ |
| A. | doping density |
| B. | doping thickness |
| C. | doping rate |
| D. | doping material |
| Answer» B. doping thickness | |
| 50. |
Choose the methods provided by Console.Out and Console.Error?$ |
| A. | Write |
| B. | WriteLine |
| C. | WriteKey |
| D. | Write & WriteLine |
| Answer» D. Write & WriteLine | |