Explore topic-wise MCQs in Testing Subject.

This section includes 657 Mcqs, each offering curated multiple-choice questions to sharpen your Testing Subject knowledge and support exam preparation. Choose a topic below to get started.

1.

In a four stroke engine, the working cycle is completed in __________

A. one revolution of the crankshaft
B. two revolution of the crankshaft
C. three revolution of the crankshaft
D. four revolution of the crankshaft
Answer» C. three revolution of the crankshaft
2.

How is the temperature of slug maintained in the reactor?

A. Water
B. Sulphuric acid
C. Steam
D. Ice vapour
Answer» B. Sulphuric acid
3.

At what temperature of the feed slug is maintained(degree Celsius) ?

A. 500 to 600
B. 880 to 930
C. 750 to 780
D. 1050 to 1150
Answer» C. 750 to 780
4.

For exothermic oxidation, which technology helps in better heat distribution in the reactor?

A. Fluidized bed
B. Spouted bed
C. Using air blowers in reactors
D. None of the mentioned
Answer» B. Spouted bed
5.

The mechanism of action of cyanide, a mitochondrial toxin, is by inhibiting ____________

A. ATP synthase
B. Succinate dehydrogenase
C. Cytochrome c oxidase
D. NADH dehydrogenase
Answer» D. NADH dehydrogenase
6.

Mitochondrial DNA is one of the best marker tools for population biologists and evolutionary biologists because _____________

A. Absence of genetic recombination in mt-DNA
B. Mitochondrial genes are specific to mt-DNA
C. It can be easily isolated
D. It undergoes spontaneous mutation
Answer» B. Mitochondrial genes are specific to mt-DNA
7.

What is the size of plant mitochondrial DNA?

A. 16kb
B. 200-2500kb
C. 100- 2550kb
D. 100-2500kb
Answer» C. 100- 2550kb
8.

What is the size of human mitochondrial DNA?

A. 16kb
B. 200kb
C. 2500kb
D. 100kb
Answer» B. 200kb
9.

Oxysomes or F0 – F1 particles occur on _____________

A. Inner mitochondrial membrane
B. Chloroplast surface
C. Mitochondrial surface
D. Thylakoids
Answer» B. Chloroplast surface
10.

What is Mitochondrial DNA?

A. Simple, single stranded linear DNA molecule
B. Simple, single stranded circular DNA molecule
C. Simple, double stranded linear DNA molecule
D. Simple, double stranded circular DNA molecule
Answer» E.
11.

How many human mitochondrial proteins are encoded in the mitochondrial genome and synthesized within mitochondria?

A. 11
B. 12
C. 13
D. 14
Answer» D. 14
12.

Schick Test is used for detection of which of the following disease?

A. Diphtheria
B. Tuberculosis
C. Erythrasma
D. Botulism
Answer» B. Tuberculosis
13.

Erythrasma is caused by which of the following microorganism?

A. Corynebacterium diphtheriae
B. Corynebacterium ulcerans
C. Corynebacterium minutissimum
D. Listeria monocytogenes
Answer» D. Listeria monocytogenes
14.

Which of the following inactivates IgA antibodies?

A. Cord factor
B. Diphthin
C. Neuroaminidase
D. K antigens
Answer» C. Neuroaminidase
15.

Toxin A involved in pseudomembranous colitis is a type of _______________

A. endotoxin
B. enterotoxin
C. cytotoxin
D. neurotoxin
Answer» C. cytotoxin
16.

Patients with botulism are treated with monovalent antitoxin.

A. True
B. False
Answer» C.
17.

Which of the following temperature is suitable for the multiplication of clostridia spores?

A. 109 to116 degree F
B. 100 degree F
C. -2 to 16 degree F
D. 30-40 degree F
Answer» B. 100 degree F
18.

Which of the following organisms produces neurotoxin as a virulence factor?

A. Bacillus anthracis
B. Clostridium tetani
C. Streptococcus pneumoniae
D. Staphylococcus aureus
Answer» C. Streptococcus pneumoniae
19.

An increment of the current density can lead to blue shifts in the PL peak of mpSi.

A. True
B. False
Answer» B. False
20.

PL properties of mpSi and μpSi structures depend on _____

A. temperature
B. etching conditions
C. light intensity
D. refractive index
Answer» C. light intensity
21.

The discovery of bright red-orange photoluminescence was the origin for the use of mpSi materials for optoelectronic devices.

A. True
B. False
Answer» B. False
22.

Which of the following is one of the important optical property of mpSi and μpSi structure?

A. Photo-conductivity
B. Stimulated emission
C. Photo-luminescence
D. Photo-emissivity
Answer» D. Photo-emissivity
23.

The effective refractive index of mpSi and μpSi are modulated to produce rugate filters.

A. True
B. False
Answer» B. False
24.

Microcavities based on mpSi and μpSi can be used to develop optical pass-band filters.

A. True
B. False
Answer» B. False
25.

DBR structures based on_____ can be implemented into Fabry–Pérot filters.

A. mpSi
B. pSi
C. SiO2
D. graphite
Answer» B. pSi
26.

The structure of the mpSi- or μpSi-based DBR affects their refractive indices.

A. True
B. False
Answer» B. False
27.

mpSi and μpSi structures are used to develop distributed Bragg reflectors.

A. True
B. False
Answer» B. False
28.

Transcyte® is a non-living wound dressing produced by Advanced Tissue Sciences, Inc.

A. TRUE
B. FALSE
Answer» B. FALSE
29.

The epidermis is usually separated from a ____________

A. skin biopsy
B. grafting
C. replacement
D. regeneration
Answer» B. grafting
30.

The epidermis is considered the outermost component of the skin and primarily comprised of ___________ a specific type of epithelial cells.

A. keratinocytes
B. collagen
C. stem cells
D. chondrocytes
Answer» B. collagen
31.

The technology for epidermal replacement (a confluent epithelial cell layer attached to a petroleum gauze carrier) was developed in the _______________

A. 1970s
B. 1990s
C. 2000s
D. 2010s
Answer» B. 1990s
32.

The equation for vertical deflection can also be written as \(Δ=\frac{pa}{E} F\). What is the term F referred to as?

A. Deflection factor
B. Displacement factor
C. Deflection constant
D. Displacement constant
Answer» C. Deflection constant
33.

The Boussinesq’s equation can be applied when the one-layer system is assumed as a half-space.

A. True
B. False
Answer» B. False
34.

Find the vertical stress at a depth of 40 cm from the surface if the radius of the circular load is 17 cm and the contact pressure is 6.5 kg/cm2.

A. 0.43 kg/cm2
B. 1.43 kg/cm2
C. 0.45 kg/cm2
D. 1.45 kg/cm2
Answer» C. 0.45 kg/cm2
35.

The deflection in the pavement surface is considered to be equal to deflection on top of the subgrade.

A. True
B. False
Answer» B. False
36.

What is the right equation to find the vertical deflection in the pavement?

A. \(Δ=\frac{3p}{2E(a^2+z^2 )^{1∕2}}\)
B. \(Δ=\frac{3pa^2}{2E(a^2+z^2 )^{1∕2}}\)
C. \(Δ=\frac{3pa^2}{2E(a^2+z^2 )^{3∕2}}\)
D. \(Δ=\frac{3pa^2}{E(a^2+z^2 )^{1∕2}}\)
Answer» C. \(Δ=\frac{3pa^2}{2E(a^2+z^2 )^{3∕2}}\)
37.

The design charts for computing vertical, tangential and radial stresses were first developed for a Poisson’s ratio of ______

A. 0.3
B. 0.4
C. 0.2
D. 0.5
Answer» E.
38.

A flexible pavement of thickness 50 cm is laid over a subgrade. A circular load of radius 15 cm with a uniform contact pressure of 7 kg/cm2 is applied on the pavement. What would be the vertical stress on top of the subgrade?

A. 0.85 kg/cm2
B. 1.58 kg/cm2
C. 0.58 kg/cm2
D. 1.85 kg/cm2
Answer» B. 1.58 kg/cm2
39.

The vertical ______ on top of the subgrade controls the subgrade rutting.

A. Tensile stress
B. Tensile strain
C. Compressive stress
D. Compressive strain
Answer» E.
40.

When does shear stress occur in the pavement?

A. Friction between pavement and tyre
B. Seepage into subgrade
C. Loading exceeds capacity
D. Weathering of the pavement surface
Answer» D. Weathering of the pavement surface
41.

Which of the below is not a type of stress that is commonly found in flexible pavements?

A. Normal stress
B. Shear stress
C. Vertical stress
D. Radial stress
Answer» B. Shear stress
42.

The HCF of two prime numbers a and b is _________

A. a⁄b
B. ab
C. a + b
D. 1
Answer» E.
43.

HCF(a, b) is equals to _________

A. ab/(LCM(a, b))b) (a + b)/(LCM(a, b))c) (LCM(a,
B. is equals to _________a) ab/(LCM(a, b))b) (a + b)/(LCM(a, b))
C. (LCM(a, b))/ab
D. None of the mentioned
Answer» B. is equals to _________a) ab/(LCM(a, b))b) (a + b)/(LCM(a, b))
44.

State whether the given statement is True or False.

A. True
B. FalseView Answer
Answer» B. FalseView Answer
45.

If a number is 22 x 31 x 50 and b is 22 x 31 x 51 then hcf of a, b is?

A. 22 x 31 x 51
B. 22 x 32 x 52
C. 21 x 31 x 50
D. 22 x 32 x 50
Answer» D. 22 x 32 x 50
46.

If LCM of two number is 10 and GCD is 5 then the product of two numbers is?

A. 45
B. 50
C. 7
D. 49
Answer» C. 7
47.

The product of two numbers are 12 and there LCM is 6 then HCF is?

A. 12
B. 2
C. 6
D. None of the mentioned
Answer» C. 6
48.

HCF of 6, 10 is?

A. 60
B. 30
C. 10
D. 2
Answer» E.
49.

If a,b are integers such that a > b then hcf(a, b) lies in _________

A. a> hcf(a, b)>bb) a>b> = hcf(a, b)c) hcf(a,
B. lies in _________a) a> hcf(a, b)>bb) a>b> = hcf(a, b)
C. hcf(a, b)> = a>b
D. None of the mentioned
Answer» C. hcf(a, b)> = a>b
50.

The HCF of two number 1, b(integer) are _________

A. b + 2
B. 1
C. b
D. None of the mentioned
Answer» C. b