

MCQOPTIONS
Saved Bookmarks
This section includes 150 Mcqs, each offering curated multiple-choice questions to sharpen your Electrical Engineering Questions knowledge and support exam preparation. Choose a topic below to get started.
101. |
Impurities are generally added in the pure semiconductor to |
A. | increase the number of electrons |
B. | increase the number of holes |
C. | increase their conductivity |
D. | all of these |
Answer» D. all of these | |
102. |
If two conductors carrying currents in opposite direction are placed parallel to each other then the magnetic field set up by the conductors |
A. | Attract each other |
B. | Repels each other |
C. | Perpendicular to each other |
D. | Parallel to each other |
Answer» C. Perpendicular to each other | |
103. |
If the voltage increases from zero to peak value and decreases back to zero during one alteration, then the average value must be |
A. | Less than zero |
B. | Greater than peak value |
C. | Between zero to peak value |
D. | None of these |
Answer» D. None of these | |
104. |
If the transformer is loaded then the secondary terminal voltage falls for and rises for |
A. | Lagging power factor, leading power factor |
B. | Lagging power factor, unity power factor |
C. | Unity power factor, lagging power factor |
D. | Leading power factor, lagging power factor |
Answer» B. Lagging power factor, unity power factor | |
105. |
If the number of turns, area and current of an ac circuit is doubled then the new inductance will be |
A. | Equal to the former |
B. | Twice of the former |
C. | Four times the former |
D. | Half of the former |
Answer» D. Half of the former | |
106. |
If the number of conductors and speed of a lap wound generator is doubled then the generated emf will be |
A. | Remains same |
B. | Twice of the former |
C. | Four times of former emf |
D. | Half of the former emf |
Answer» D. Half of the former emf | |
107. |
If the magnetic field is stationary and the conductor is in motion then the emf induced is called |
A. | Dynamically induced emf |
B. | Statically induced emf |
C. | Self induced emf |
D. | Mutually induced emf |
Answer» B. Statically induced emf | |
108. |
If the length of the filament is increased then the |
A. | Power also increases |
B. | Power decreases |
C. | Required oxygen increases |
D. | Flow of current increases |
Answer» B. Power decreases | |
109. |
If the armature current of dc series motor has become twice then the torque will become |
A. | Twice of the former |
B. | Four times of the former |
C. | One fourth of the former |
D. | Remains same |
Answer» C. One fourth of the former | |
110. |
If induction motor is direct switched-on then it will develop |
A. | 1.5 times their full load torque |
B. | 1.5 to 2.5 times their full load torque |
C. | 2.5 times their full load torque |
D. | 1.5 to 5 times their full load torque |
Answer» C. 2.5 times their full load torque | |
111. |
If an induction motor is initially connected in delta and then reconnected in star then the current drawn will become |
A. | Thrice of the current drawn when connected in delta |
B. | Twice of the current drawn when connected in delta |
C. | One third of the current drawn when connected in delta |
D. | Half of the current drawn when connected in delta |
Answer» D. Half of the current drawn when connected in delta | |
112. |
If an extra resistance is connected in the rotor circuit of slip ring induction motor, then |
A. | Starting current and torque decreases |
B. | Starting current increases and torque decreases |
C. | Starting current decreases and torque increases |
D. | Starting current and torque increases |
Answer» D. Starting current and torque increases | |
113. |
If an external electric field is applied across the intrinsic semiconductor, then the |
A. | More number of electron holes pair combination will be broken |
B. | More number of electron holes pair combination will be evolved |
C. | Less number of electron holes pair combination will be broken |
D. | Less number of electron holes pair combination will be evolved |
Answer» B. More number of electron holes pair combination will be evolved | |
114. |
If a number of resistors are connected in parallel, then the reciprocal of total resistance is equal to |
A. | Sum of individual resistances |
B. | Sum of the reciprocal of individual resistances |
C. | Reciprocal of the sum of individual resistances |
D. | All of these |
Answer» C. Reciprocal of the sum of individual resistances | |
115. |
If a current of 5A flows through a resistor of 12 ohm then the power developed and the energy dissipated in 2 minutes are |
A. | 300 W, 36000 J |
B. | 360 W, 30000 J |
C. | 380 W, 35000 J |
D. | 380 W, 36000 J |
Answer» B. 360 W, 30000 J | |
116. |
Heating element of electric iron box is an alloy of |
A. | Copper and nickel |
B. | Nickel and cobalt |
C. | Iron and magnesium |
D. | Nickel and chromium |
Answer» E. | |
117. |
Gauss’s law is applicable for |
A. | Only point charge |
B. | Infinite line charge |
C. | Infinite sheet of charge |
D. | All of these |
Answer» E. | |
118. |
From full load to no load, the change of terminal voltage is more in case of |
A. | Lagging power factor |
B. | Leading power factor |
C. | Unity power factor |
D. | Both lagging and leading power factor compared to unity power factor |
Answer» E. | |
119. |
For solving parallel ac circuit, the method used is |
A. | Vector method |
B. | Admittance method |
C. | Symbolic or j - method |
D. | All of these |
Answer» E. | |
120. |
For induction motors, |
A. | Should be essentially a constant speed motor |
B. | Its speed reduces to some extent with increase in load |
C. | Does not need to be synchronized |
D. | All of these |
Answer» E. | |
121. |
For improving the soil condition and efficiency of earthing system, the pit area around the G.I. pipe is filled with |
A. | Mixture of copper and nickel |
B. | Mixture of chloride and sodium |
C. | Mixture of aluminium and sulphate |
D. | Mixture of salt and coal |
Answer» E. | |
122. |
For forming an electric dipole between two point charges separated by a small distance, the two point charges are of |
A. | Unequal magnitude and opposite sign |
B. | Unequal magnitude but same sign |
C. | Equal magnitude and same sign |
D. | Equal magnitude but opposite sign |
Answer» E. | |
123. |
For extinguishing arc in an high voltage fuses, the element can be immersed in |
A. | Oil |
B. | Carbon tetrachloride |
C. | Carbon tetrafloride |
D. | Only (a) and (b) |
Answer» E. | |
124. |
For controlling the initial inrush current, |
A. | Reduced voltage is applied to the stator during the starting period |
B. | Reduced voltage is applied to the stator when the motor is running at rated speed |
C. | Either (a) or (b) |
D. | None of these |
Answer» B. Reduced voltage is applied to the stator when the motor is running at rated speed | |
125. |
For application in electric locomotives or for traction purposes, the most suitable motor is |
A. | Dc series motor |
B. | Differentially compounded motor |
C. | Cumulatively compounded motor |
D. | None of these |
Answer» B. Differentially compounded motor | |
126. |
For a two - way position control of lamp, the number of switches required is |
A. | One |
B. | Two |
C. | Three |
D. | Four |
Answer» C. Three | |
127. |
Filters are used to convert |
A. | Pulsating dc signal into a pure dc signal |
B. | Pure dc signal into a pulsating dc signal |
C. | Pulsating dc signal into a pure ac signal |
D. | Pulsating ac signal into a pure dc signal |
Answer» B. Pure dc signal into a pulsating dc signal | |
128. |
Electrical work is |
A. | Directly proportional to the potential difference |
B. | Directly proportional to the charge |
C. | Directly proportional to the current |
D. | All of these |
Answer» E. | |
129. |
Electrical energy can be converted into |
A. | Light energy |
B. | Electromagnetic energy |
C. | Electrochemical energy |
D. | All of these |
Answer» E. | |
130. |
Electrical appliances which works on the electromagnetic principle is / are |
A. | Generators |
B. | Motors |
C. | Transformers |
D. | All of these |
Answer» E. | |
131. |
Electric heaters is made up of |
A. | Chromed iron |
B. | Brass |
C. | Steel |
D. | Both (a) and (b) |
Answer» E. | |
132. |
Electric flux density is a function of |
A. | Charge |
B. | Position |
C. | Medium |
D. | Only (a) and (b) |
Answer» E. | |
133. |
Electric field intensity is |
A. | Directly proportional to the force applied |
B. | Inversely proportional to the force applied |
C. | Directly proportional to the permittivity |
D. | Inversely proportional to the charge |
Answer» B. Inversely proportional to the force applied | |
134. |
Electric bell consists of a |
A. | Horse shoe type electromagnet |
B. | Circular electromagnet |
C. | Rod shaped electromagnet |
D. | All of these |
Answer» B. Circular electromagnet | |
135. |
Efficiency of a transformer is maximum at |
A. | Leading power factor |
B. | Lagging power factor |
C. | Unity power factor |
D. | None of these |
Answer» D. None of these | |
136. |
Coulomb’s First Law states that |
A. | Unlike poles attract each other |
B. | Like poles repel each other |
C. | Unlike poles attract each other and like poles repel each other |
D. | The force between two magnetic poles placed in a medium directly proportional to their pole strengths |
Answer» D. The force between two magnetic poles placed in a medium directly proportional to their pole strengths | |
137. |
Copper losses is proportional to |
A. | kVA |
B. | square of kVA |
C. | cube of kVA |
D. | none of these |
Answer» C. cube of kVA | |
138. |
Copper losses occurs due to ohmic resistance in |
A. | Primary winding |
B. | Secondary winding |
C. | Both primary and secondary winding |
D. | None of these |
Answer» D. None of these | |
139. |
Commutator motors have |
A. | Absolutely uniform torque |
B. | Approximately uniform torque |
C. | Non - uniform torque |
D. | None of these |
Answer» D. None of these | |
140. |
By using two wattmeter method, power can be measured in |
A. | 3 - phase, 2 - wire system |
B. | 3 - phase, 3 - wire system |
C. | 3 - phase, 4 - wire system |
D. | All of these |
Answer» C. 3 - phase, 4 - wire system | |
141. |
Buzzer in principle is a bell |
A. | with hammer |
B. | with gong |
C. | with both hammer and gong |
D. | without hammer and gong |
Answer» E. | |
142. |
At low temperature, the semi conductor behaves as a |
A. | Perfect insulator |
B. | Perfect conductor |
C. | Perfect consulator |
D. | None of these |
Answer» D. None of these | |
143. |
Among the following damping method, the most effective and efficient damping is |
A. | Air friction damping |
B. | Fluid friction damping |
C. | Eddy current damping |
D. | None of these |
Answer» D. None of these | |
144. |
Alternating voltage can be generated by |
A. | By rotating a coil in a magnetic field |
B. | By rotating a magnetic field within a stationary coil |
C. | Either (a) or (b) |
D. | Neither (a) or (b) |
Answer» D. Neither (a) or (b) | |
145. |
According to the End Rule, the current directions when looked from one end of the coil if that end is South Pole and if the end is North Pole are |
A. | Both clockwise |
B. | Anticlockwise, clockwise |
C. | Clockwise, anticlockwise |
D. | Both anticlockwise |
Answer» D. Both anticlockwise | |
146. |
According to the couloumb’s second law, the force between two magnetic poles placed in a medium is |
A. | Directly proportional to their pole strengths. |
B. | Inversely proportional to the square of the distance between them |
C. | Inversely proportional to the absolute permeability of the surrounding medium |
D. | All of these |
Answer» E. | |
147. |
According to the coulomb’s law, the force between two point charges is |
A. | Directly proportional to the product of the charges |
B. | Inversely proportional to the square of the distance between them |
C. | Along the line joining them |
D. | All of these |
Answer» E. | |
148. |
According, to Kirchoff’s voltage law |
A. | The algebraic sum of all the e.m.f’s in the circuit is zero |
B. | Algebraic sum all the voltage drops in the circuit is zero |
C. | Algebraic sum of e.m.f’s plus algebraic sum of voltage drops is equal to zero |
D. | All of these |
Answer» D. All of these | |
149. |
A vector quantity has |
A. | Only magnitude |
B. | Only direction |
C. | Both (a) and (b) |
D. | None of these |
Answer» D. None of these | |
150. |
A radian is defined as the central angle, for which length of its arc |
A. | Should be greater than radius |
B. | Should be less than radius |
C. | Should be equal to the radius |
D. | None of these |
Answer» D. None of these | |