Explore topic-wise MCQs in Unit Processes.

This section includes 1120 Mcqs, each offering curated multiple-choice questions to sharpen your Unit Processes knowledge and support exam preparation. Choose a topic below to get started.

501.

Measure of sensitivity of crystal oscillator output frequency to supply voltage is called

A. Frequency pulling
B. Frequency ratio
C. Output ratio
D. Frequency pushing
Answer» E.
502.

Which of the heterogeneous style means that drawing of its running structures will reveal patterns of different styles in different areas?

A. Locality
B. Hierarchical
C. Simultaneous
D. None of the mentioned
Answer» B. Hierarchical
503.

To remove 1% primary sludge which of the following size of mesh of a cyclone gritter is used?

A. 150
B. 100
C. 300
D. 50
Answer» B. 100
504.

When a JMS message arrives, the onMessage() method will be called with the message as the method argument.

A. True
B. False
Answer» B. False
505.

Sources of sound and observer are moving towards each other, the observer will hear

A. High frequency, low wavelength
B. Low frequency, low wavelength
C. High frequency, low wavelength
D. Low frequency, high wavelength
Answer» D. Low frequency, high wavelength
506.

Which of the following functions can be used for converting the nearest integer to its argument?

A. int
B. mint
C. uint
D. nint
Answer» E.
507.

What is the disadvantage of the Knoop hardness test?

A. Elastic recovery
B. Soft indenter
C. High load required
D. Cannot use thin specimen
Answer» B. Soft indenter
508.

In which case Constant Molar overflow is true?

A. Equimolar counter diffusion
B. Equimolar co-current diffusion
C. Distinct overflow
D. Not Sure of Diffusion
Answer» B. Equimolar co-current diffusion
509.

Which of the following gases cannot be separated from air using fractional distillation?

A. Argon
B. Oxygen
C. Helium
D. Nitrogen
Answer» D. Nitrogen
510.

Denaturants are used for depressing _________________

A. Melting temperature
B. Freezing temperature
C. Boiling temperature
D. Denaturation
Answer» B. Freezing temperature
511.

The term ___________in construction is applied to the finishing of mortar joints in masonry (stone or brick). In exposed masonry, these are considered to be the weakest part.

A. painting
B. deteriorating
C. pointing
D. finishing
Answer» D. finishing
512.

___________ percentage of tones are produced by a checkerboard pattern of black and white squares.

A. 100%
B. 50%
C. 25%
D. 5%
Answer» C. 25%
513.

Which property of an LTI system does the following equation prove h[n]*h1[n]=∂[n]?$

A. Invertibility
B. Stability
C. Associativilty
D. Commutative
Answer» B. Stability
514.

HEMT based __________ have a spot-size convertor with a photodiode.

A. p-n junction diode
B. p-i-n photoreceiver
C. IGBT
D. BJT
Answer» C. IGBT
515.

Which of the following is untrue regarding TMHMM?

A. It is a web-based program based on an HMM algorithm
B. It is trained to recognize transmembrane helical patterns
C. It is not trained to recognize transmembrane helical patterns
D. When a query sequence is scanned, the probability of having an α-helical domain is given
Answer» D. When a query sequence is scanned, the probability of having an ‚âà√≠¬¨¬±-helical domain is given
516.

In which table of INFORMATION_SCHEMA is the information about table index characteristics stored?

A. FILES
B. STATISTICS
C. SCHEMATA
D. VIEWS
Answer» C. SCHEMATA
517.

For what peripheral speed is the poles bolted to the yoke?

A. 20 m per s
B. 30 m per s
C. 25 m per s
D. 27 m per s
Answer» D. 27 m per s
518.

The bandwidth of the differential amplifier increases, if the value of

A. Open loop voltage gain decreases
B. Closed loop voltage gain decreases
C. Differential voltage gain decreases
D. All of the mentioned
Answer» C. Differential voltage gain decreases
519.

IL can be combined with metal-assisted etching to produce _____ Choose the correct one.

A. silicon bars
B. porous silicon
C. porous silicon sheets
D. silicon nanowires
Answer» E.
520.

Which of the following splicosomal RNAs does not take part in the 5’ site splicing of the intron?$

A. U1
B. U2
C. U5
D. U6
Answer» D. U6
521.

The steep, large amplitude variation of the QRS complex is the obvious characteristics to use and this is the function of the Q wave detector.

A. True
B. False
Answer» C.
522.

Energy flows through the ecosystem in the form of __________ bonds.

A. C-C
B. N-N
C. O-O
D. F-F
Answer» B. N-N
523.

Which of the following is not true for a Schottky-Barrier Diode (SBD)?

A. It is formed by bringing metal into contact with a moderately doped n-type semiconductor material.
B. In the SBD, current is conducted by mainly by minority carriers.
C. The forward voltage drop of a conducting SBD is lower than that of a pn-junction diode.
D. SBD are used in the design of a special form of bipolar-transistor logic circuits
Answer» E.
524.

If w belongs to L(G), for some CFG, then w has a parse tree, which tell us the ________ structure of w.

A. semantic
B. syntactic
C. lexical
D. all of the mentioned
Answer» C. lexical
525.

Power spectral density of thermal noise remains uniform upto frequency ___________

A. 10<sup>15</sup> HZ
B. 10<sup>5</sup> HZ
C. 10<sup>2</sup> HZ
D. 10<sup>13</sup> HZ
Answer» E.
526.

The speed of Pentium-Pro when compared to that of Pentium is

A. equal
B. twice
C. thrice
D. two-third
Answer» C. thrice
527.

The cavity inside the blastula is called as _____________

A. Blastocoel
B. Blastomere
C. Gastrula
D. Animal pore
Answer» B. Blastomere
528.

Which microbe causes the disease erysipelas?

A. S. pyogenes
B. C. perfringens
C. Pseudomonas aeruginosa
D. E.coli
Answer» B. C. perfringens
529.

How does an injection of a filamentous phage (example- M13) DNA into the host bacterium occur?

A. Via pilus
B. Surface attachment
C. Transformation
D. Transfection
Answer» B. Surface attachment
530.

Which blood vessel carries the least amount of urea?

A. Pulmonary vein
B. Renal artery
C. Renal vein
D. Hepatic portal vein
Answer» D. Hepatic portal vein
531.

Which of the following are client-side JavaScript object?

A. Database
B. Cursor
C. Client
D. FileUpLoad
Answer» E.
532.

During regenerative braking of DC motors ____________

A. Motor will run as a generator
B. Motor will reverse in direction
C. Motor will run at reduced speed
D. Motor will run as free rotating shaft
Answer» B. Motor will reverse in direction
533.

Which helix angle is used for deep hole drilling?

A. small
B. large
C. zero
D. none of the mentioned
Answer» C. zero
534.

Which of the following value can be taken [Nc] surface for surface footing?

A. 6
B. 5
C. 2.1
D. 9
Answer» B. 5
535.

Semantic Network is also known as Frame networks.

A. True
B. False
Answer» B. False
536.

Mobicast is based on a method proposed by the IETF to support multicast over Mobile-IP. State whether True or False.

A. True
B. False
Answer» B. False
537.

When the belt is stationary, it is subjected to some tension known as initial tension. The value of this tension is equal to the

A. tension in the tight side of the belt
B. tension in the slack side of the belt
C. sum of the tensions on the tight side and slack side of the belt
D. average tension of the tight side and slack side of the belt
Answer» E.
538.

Calculate the number of revolutions if the frequency is 15kHz and the paired poles are 50.

A. 100
B. 200
C. 300
D. 400
Answer» D. 400
539.

The normalized representation of 0.0010110 * 2 9 is _______

A. 0 10001000 0010110
B. 0 10000101 0110
C. 0 10101010 1110
D. 0 11110100 11100
Answer» C. 0 10101010 1110
540.

Sour Cream frequently develops a bitter flavor due to continued bacterial proteolytic enzyme activity when stored for more than?

A. 1 week
B. 3-4 weeks
C. 6-8 weeks
D. 10-12 weeks
Answer» C. 6-8 weeks
541.

Which of the following system call is used for truncating a file?

A. truncate
B. ftruncate
C. trunk
D. truncate and ftruncate
Answer» E.
542.

_______ a propulsion arrangement, where by a propeller is mounted within a cylindrical shroud.

A. Boiler
B. Exhauster
C. Impellor
D. Ducted fan
Answer» B. Exhauster
543.

The taper angle of the kerf can be_____ of the AWJ

A. reduced by increasing the cutting ability
B. increased by increasing the cutting ability of the
C. reduced by decreasing the cutting ability of the
D. taper angle is not a function of the cutting ability of the jet
Answer» B. increased by increasing the cutting ability of the
544.

SCO stands for ___________

A. Signal controlled oscillator
B. Switch controlled oscillator
C. Sub carrier oscillator
D. Sweep controlled oscillator
Answer» D. Sweep controlled oscillator
545.

The Rho function is defined as : a[x, y, z] ‚Üê a[x, y, z-g(t)], where g(t) is defined as$

A. (t+1)(t+2)/2
B. (t+1)(t-2)/2
C. (t-1)(t-2)/2
D. (t-1)(t+2)/2
Answer» B. (t+1)(t-2)/2
546.

X bar chart should be interpreted before s chart if both are indicating out of control situation.

A. True
B. False
Answer» C.
547.

Which of the following is not a material used for making an electrode in metal arc welding, for treating stainless steels?

A. Niobium
B. Columbium
C. Titanium
D. Potassium
Answer» E.
548.

Which of them is not a standard flag used in TCP communication between client and server?

A. Synchronize
B. Acknowledgment
C. Finish
D. Start
Answer» E.
549.

What is eutectoid temperature?

A. 727°c
B. 768°c
C. 1146°c
D. 1495°c
Answer» C. 1146¬¨¬®‚Äö√†√ªc
550.

Which of the following is the major point of regulation on the pathway to cholesterol?

A. Thiolase
B. HMG co-A synthase
C. HMG co-A reductase
D. Pyruvate kinase
Answer» D. Pyruvate kinase