Explore topic-wise MCQs in Testing Subject.

This section includes 657 Mcqs, each offering curated multiple-choice questions to sharpen your Testing Subject knowledge and support exam preparation. Choose a topic below to get started.

1.

PHAGE_DISPLAY_TECHNIQUE_MAKES_USE_OF_WHICH_OF_THE_FOLLOWING_VECTORS??$

A. M13
B. Lambda
C. 2 micron circle
D. BAC
Answer» B. Lambda
2.

PRIMARY_EXCRETORY_ORGANS_ARE_KIDNEYS_WHILE_ACCESSORY_EXCRETORY_ORGANS_URINARY_BLADDER.?$

A. True
B. False
Answer» C.
3.

WHICH_METHOD_OF_BRAKING_IS_GENERALLY_USED_IN_ELEVATORS??$

A. Plugging
B. Regenerative braking
C. Rheostatic braking
D. Mechanical braking
Answer» B. Regenerative braking
4.

ACCORDING_TO_THE_HELIX_ANGEL_OF_THE_FLUTES,_DRILL_CAN_BE_CLASSIFIED_AS_____?$

A. small helix
B. large helix
C. zero helix
D. all of the mentioned
Answer» E.
5.

ANTONYMY_RELATION_MEANS,?$

A. A is part of B
B. B has A as a part of itself
C. A denotes opposite of B
D. A is superordinate of B
Answer» D. A is superordinate of B
6.

___________IS_A_IS_A_RELIABLE_MULTICAST_PROTOCOL_AND_IS_USED_FOR_BOTH_WIRED_AND_WIRELESS_ENVIRONMENTS.?$

A. MMP
B. RMDP
C. RM2
D. Mobicast
Answer» D. Mobicast
7.

WHAT_IS_THE_FREQUENCY_OF_A_TWO_POLE_MACHINE_HAVING_N=50??$

A. 100Hz
B. 200Hz
C. 50Hz
D. 25Hz
Answer» D. 25Hz
8.

IN_32_BIT_REPRESENTATION_THE_SCALE_FACTOR_AS_A_RANGE_OF_________?$

A. -128 to 127
B. -256 to 255
C. 0 to 255
D. None of the mentioned
Answer» B. -256 to 255
9.

LOW-FAT_YOGURT_MUST_HAVE_A_MINIMUM_OF_________FAT_AND_A_MAXIMUM_OF_________FAT.?$

A. 1%, 4%
B. .5%, 2.5%
C. .5%, 2%
D. 1%, 3.25%
Answer» D. 1%, 3.25%
10.

FIND_THE_VALUE_OF_Z12_IN_THE_CIRCUIT_SHOWN_IN_THE_QUESTION_7.?$

A. 3
B. 2
C. 1
D. 0
Answer» D. 0
11.

P=2?$

A. Error
B. No output
C. p=-1
Answer» B. No output
12.

_______ARE_SUITABLE_FOR_LOW_SPECIFIC_SPEED,_HIGH_PRESSURE_RATIO_PER_STAGE.?$

A. Centrifugal compressor
B. Axial compressor
C. Axial pump
D. Radial pump
Answer» D. Radial pump
13.

STRIATION_FACTOR_IS_AN_IMPORTANT_PRODUCT_QUALITY_PARAMETER_IN_AWJM.?$

A. True
B. False
Answer» B. False
14.

WHAT_WILL_BE_THE_FREQUENCY_MODULATION_INDEX_OF_SCO_??$

A. 1
B. 2
C. 5
D. 9
Answer» D. 9
15.

IN_SHA-3,_THE_IOTA_STEP_FUNCTION_HAS_A_ROUND_CONSTANT_WHICH_ONLY_WORKS_ON_THE_LAST_LANE.?$

A. True
B. False
Answer» C.
16.

LOW_CARBON_STEELS_NEED_NOT_BE_PREHEATED_BEFORE_WELDING.?$

A. True
B. False
Answer» B. False
17.

WHICH_OF_THE_FOLLOWING_IS_NOT_A_VALID_SCANNING_METHOD??$

A. Xmas Tree scan
B. SYN Stealth scan
C. Null Scan
D. Cloud scan
Answer» E.
18.

WHAT_IS_THE_VALUE_OF_EUTECTIC_TEMPERATURE??$

A. 727°c
B. 768°c
C. 1146°c
D. 1495°c
Answer» E.
19.

HOW_MANY_CARBONS_ARE_PRESENT_IN_GERANYL_PYROPHOSPHATE??$

A. 8
B. 9
C. 10
D. 11
Answer» D. 11
20.

WHAT_IS_THE_FORM_OR_STRUCTURE_OF_ASBESTOSE??$

A. Massive
B. Flaky
C. Tabular
D. Globular
Answer» C. Tabular
21.

PISTON_PUMPS_ARE_SELF_PRIMING.?$

A. True
B. False
Answer» B. False
22.

Heavy cream (whipping cream) contains a minimum milk fat of?$

A. 10%
B. 18%
C. 30%
D. 36%
Answer» E.
23.

_________________is quite an esoteric process for preventing session creation through a particular port.$

A. Port knocking
B. Port cracking
C. Port hacking
D. Port-jacking
Answer» B. Port cracking
24.

What is the form or structure of corundum?$

A. Tabular, flaky
B. Schistose, columnar
C. Hexagonal, columnar
D. Globular, tabular
Answer» D. Globular, tabular
25.

Piston pumps are very _______$

A. Expensive
B. Cheap
C. Reasonable
D. Intricate
Answer» B. Cheap
26.

Alternator compounding characteristic is obtained by$

A. keeping Vt constant
B. keeping Ef constant
C. keeping Ia constant
D. varying Vt
Answer» B. keeping Ef constant
27.

Vegetation affects the runoff _____$

A. True
B. False
Answer» B. False
28.

Programming language experience is a part of which factor of COCOMO cost drivers?$

A. Personnel Factor
B. Product Factor
C. Platform Factor
D. Project Factor
Answer» B. Product Factor
29.

Saturation velocity is attained when$

A. energy gained is greater than energy lost
B. energy lost is greater than energy gained
C. enery gained equals energy lost
D. enery is fully drained
Answer» D. enery is fully drained
30.

Which of the following parameters determines the size of cavities?$

A. Size of electrode
B. Radius of orbit
C. All of the mentioned
D. None of the mentioned
Answer» D. None of the mentioned
31.

Temperature control is usually best obtained through proper heat interchange.$

A. True
B. False
Answer» B. False
32.

Which service provides the lifecycle status of a given IoT service?$

A. Enable from suspension
B. Enable
C. Update
D. Registered service status
Answer» E.
33.

The electric and magnetic field components in the electromagnetic wave propagation are in phase. State True/False.$

A. True
B. False
Answer» B. False
34.

The two members meeting at an angle can be joined by a ____________$

A. Bridle joint
B. Oblique tenon joint
C. Mitre joint
D. Birds mouth joint
Answer» D. Birds mouth joint
35.

For sloping roofs, ferro cement roofing units can be used.$

A. True
B. False
Answer» B. False
36.

Which of the following is internal list of prefixes?$

A. Modernizr._prefixes
B. Modernizr.prefixedCSS value
C. Modernizr.prefixedCSS
D. Modernizr.prefixed
Answer» B. Modernizr.prefixedCSS value
37.

The angle of the inclination of wedge over which the block is sliding and is experiencing the kinetic friction is determined by which of the following trigonometric function?$

A. Tangent Inverse
B. Cosine
C. Sine
D. Secant
Answer» B. Cosine
38.

Which of the following can be used to ensure smoothness of gear operation?$

A. By limiting the minimum permissible deviation in base circle
B. By limiting the maximum permissible deviation in base circle
C. By limiting the maximum permissible deviation in basic pitch
D. By limiting the minimum permissible deviation in basic pitch
Answer» D. By limiting the minimum permissible deviation in basic pitch
39.

Which of the following is not an imperfection in column?$

A. material not being isotropic
B. geometric variations of columns
C. material being homogenous
D. eccentricity of load
Answer» D. eccentricity of load
40.

The cylinder block and upper half of the crank case are cast by _________ material.$

A. aluminium
B. zinc
C. semi-steel
D. titanium
Answer» D. titanium
41.

Which of the following sparger is most suitable for agitated fermenters?$

A. Perforated sparger
B. Orifice sparger
C. Nozzle sparger
D. Porous sparger
Answer» D. Porous sparger
42.

Four J-K flip-flops are cascaded with their J-K inputs tied HIGH. If the input frequency (fin) to the first flip-flop is 32 kHz, the output frequency (fout) is ________$

A. 1 kHz
B. 2 kHz
C. 4 kHz
D. 16 kHz
Answer» C. 4 kHz
43.

ESR is remarkably sensitive when compared with NMR.$

A. True
B. False
Answer» B. False
44.

If all the members are defined in protected specifier then ( Constructors not considered ):$

A. Instance of class can’t be created
B. Instance of class can be created anywhere
C. Instance of class can be created only in subclasses
D. Instance of class can be created only in main() function
Answer» E.
45.

Blowing otherwise called as _________$

A. Air blow technique
B. Bubbling
C. Bubble casting
D. Bubble blowing
Answer» D. Bubble blowing
46.

Where we can see State Department of Environment?$

A. State where there is no danger for environment
B. State where there is danger for environment
C. State where there is no adequate environment
D. In all States of India
Answer» E.
47.

What does existence of styles means?$

A. Cognitive aids
B. Communication Cues
C. All of the mentioned
D. None of the mentioned
Answer» D. None of the mentioned
48.

You have to set the delegate property of MessageListenerAdapter to your target bean.$

A. True
B. False
Answer» B. False
49.

Microhardness test gives average hardness.$

A. True
B. False
Answer» C.
50.

Stringency is most commonly controlled by the temperature and ________________$

A. Humidity
B. Salt concentration
C. Size of molecule
D. Antibodies
Answer» C. Size of molecule