MCQOPTIONS
Saved Bookmarks
MCQOPTIONS
This section includes 657 Mcqs, each offering curated multiple-choice questions to sharpen your Testing Subject knowledge and support exam preparation. Choose a topic below to get started.
| 1. |
Linear meter with 1% accuracy must have _________ |
| A. | 100 divisions |
| B. | 50 divisions |
| C. | 200 divisions |
| D. | 500 divisions |
| Answer» B. 50 divisions | |
| 2. |
An executing process must be loaded entirely in main memory. What kind of a memory organization is this? |
| A. | Physical |
| B. | Logical |
| C. | Structural |
| D. | Simple |
| Answer» E. | |
| 3. |
Which of the following are not usual places for nodes’ location?$ |
| A. | joints |
| B. | supports |
| C. | point of change in cross section |
| D. | inflection point of BMD |
| Answer» E. | |
| 4. |
The phenomenon of interpreting unwanted signals on J and K while Cp (clock pulse) is HIGH is called |
| A. | Parity error checking |
| B. | Ones catching |
| C. | Digital discrimination |
| D. | Digital filtering |
| Answer» C. Digital discrimination | |
| 5. |
Two stroke engines are liable to cause a ____________ consumption of lubricating oil. |
| A. | lighter |
| B. | heavier |
| C. | unpredictable |
| D. | none of the mentioned |
| Answer» C. unpredictable | |
| 6. |
When the electrons are aligned either parallel or antiparallel to the direction of external magnetic field, the electrons will precess about the axis at a frequency that is proportional to which of the following? |
| A. | Applied magnetic field |
| B. | Electron magnetic moment |
| C. | Applied magnetic field and electron magnetic moment |
| D. | Neither applied magnetic field not electron magnetic moment |
| Answer» D. Neither applied magnetic field not electron magnetic moment | |
| 7. |
If c be the fraction of the reciprocating parts of mass m to be balanced per cyclinder of a steam locomotive with crank radius r, angular speed ω, distance between centre lines of two cylinders a, then the magnitude of the maximum swaying couple is given by$ |
| A. | 1 – c / 2 mrω<sup>2</sup>a |
| B. | 1 – c / √2mrω<sup>2</sup>a |
| C. | √2(1 – c)mrω<sup>2</sup>a |
| D. | none of the mentioned |
| Answer» C. ‚Äö√Ñ√∂‚àö‚Ć‚àö‚àÇ2(1 ‚Äö√Ñ√∂‚àö√ë‚àö¬® c)mr‚âà√¨‚àö¬¢<sup>2</sup>a | |
| 8. |
Generalization feature of a multilayer feedforward network depends on factors? |
| A. | architectural details |
| B. | learning rate parameter |
| C. | training samples |
| D. | all of the mentioned |
| Answer» B. learning rate parameter | |
| 9. |
The re gravelled course is checked at a distance of every. |
| A. | 10 m |
| B. | 20 m |
| C. | 50 m |
| D. | 100 m |
| Answer» E. | |
| 10. |
If there are multiple restriction sites for an enzyme in a given molecule, digestion is carried out in many steps. The initial digestion should be? |
| A. | complete |
| B. | partial |
| C. | carried out by a different enzyme then that the restriction site |
| D. | carried out by a mixture of restriction enzymes |
| Answer» C. carried out by a different enzyme then that the restriction site | |
| 11. |
In transfer moulding the powdered compounded plastic is in the chamber which is applied __________ temperature and ________ pressure. |
| A. | High, low |
| B. | Low, high |
| C. | Minimum, high |
| D. | Maximum, high |
| Answer» D. Maximum, high | |
| 12. |
When we will celebrate World Forestry Day? |
| A. | 21 March |
| B. | 22 April |
| C. | 05 June |
| D. | 11 July |
| Answer» B. 22 April | |
| 13. |
___________ allows uncommitted data to be read |
| A. | Read uncommitted |
| B. | Serializable |
| C. | Repeatable read |
| D. | Read committed |
| Answer» B. Serializable | |
| 14. |
Which of the following indicates the elevations directly? |
| A. | Level line |
| B. | Line of sight |
| C. | Datum |
| D. | Contour |
| Answer» E. | |
| 15. |
At high pressure super critical CO2 closed cycle gas turbine has ____________ efficiency when compared to helium closed cycle gas turbine. |
| A. | optimum |
| B. | high |
| C. | low |
| D. | none of the mentioned |
| Answer» D. none of the mentioned | |
| 16. |
The crystal resonator frequency will change according to operating time, this phenomenon is termed as |
| A. | Magnus effect |
| B. | Retrace |
| C. | Aging |
| D. | Moore’s effect |
| Answer» D. Moore‚Äö√Ñ√∂‚àö√ë‚àö¬•s effect | |
| 17. |
Which of the following architecture consists of independent processes or objects that communicate through messages? |
| A. | Independent Component architecture |
| B. | Heterogeneous Architectures |
| C. | Layered Architecture |
| D. | None of the mentioned |
| Answer» B. Heterogeneous Architectures | |
| 18. |
Which description is inappropriate ? |
| A. | A usecase is a type of agent that interacts with a product |
| B. | An actor is a type of complete interaction between product and its environment |
| C. | All of the mentioned |
| D. | None of the mentioned |
| Answer» D. None of the mentioned | |
| 19. |
You create a message listener to listen for JMS messages. This negates the need for the approach taken in BackOfficeImpl in previous recipes. |
| A. | True |
| B. | False |
| Answer» B. False | |
| 20. |
The first overtone of a stretched wire of given length is 320Hz. The first harmonic is |
| A. | 320Hz |
| B. | 160Hz |
| C. | 480Hz |
| D. | 640Hz |
| Answer» C. 480Hz | |
| 21. |
Resolution is _________ |
| A. | change in measured value from the true value |
| B. | the amount of change in the input value for the corresponding change of 1 unit in the output value |
| C. | as the measure of the repeated accuracy |
| D. | all of the mentioned |
| Answer» C. as the measure of the repeated accuracy | |
| 22. |
Which test is more preferred for testing hardness of electroplated surface? |
| A. | Dynamic hardness test |
| B. | Scratch hardness test |
| C. | Macrohardness test |
| D. | Microhardness test |
| Answer» E. | |
| 23. |
The condition where reflux and stripping ratio approaches to infinity is called as |
| A. | Minimum reflux |
| B. | Total reflux |
| C. | Optimum ratio |
| D. | Feed ratio |
| Answer» C. Optimum ratio | |
| 24. |
The beads are provided in fractional column for |
| A. | Vapours to generate |
| B. | Vapours to condense |
| C. | Vapours to evaporate |
| D. | All of the mentioned |
| Answer» C. Vapours to evaporate | |
| 25. |
Heparin is a _______________ |
| A. | Membrane |
| B. | Rate enhancer |
| C. | Antibody |
| D. | Detergent |
| Answer» E. | |
| 26. |
Which method is not adopted for volume calculating? |
| A. | From cross-section |
| B. | From spot level |
| C. | From contour |
| D. | From plan |
| Answer» E. | |
| 27. |
The first edition of a book uses ___________ dots per inch in which screen is aligned so that the rows and columns are at a 45° angle in the printed product.$ |
| A. | 200 |
| B. | 100 |
| C. | 150 |
| D. | 10 |
| Answer» D. 10 | |
| 28. |
A continuous time LTI system is invertible only when its inverse exists. |
| A. | True |
| B. | False |
| Answer» B. False | |
| 29. |
To avoid large chip, ________ devices are used. |
| A. | InGaAsP |
| B. | InGa |
| C. | GaAs |
| D. | InGaAs |
| Answer» B. InGa | |
| 30. |
Predictions solely based on hydrophobicity profiles have lowest error rates. |
| A. | True |
| B. | False |
| Answer» C. | |
| 31. |
INFORMATION_SCHEMA is not based on the SQL standard. |
| A. | True |
| B. | False |
| Answer» C. | |
| 32. |
The laminations used in the rotor body design is 1.8 mm? |
| A. | true |
| B. | false |
| Answer» B. false | |
| 33. |
Determine the output resistance of differential amplifier with three op-amp. The op-amp used is 741c, with A=200000 and Ro. The output and difference of input voltages are 44 and 11. |
| A. | 5.5mΩ |
| B. | 3.5mΩ |
| C. | 2.4mΩ |
| D. | 1.5mΩ |
| Answer» E. | |
| 34. |
Among all the lithographic techniques, interference lithography, nano-spheres lithography give better results. |
| A. | True |
| B. | False |
| Answer» B. False | |
| 35. |
Which of the following is not a function of snRNPs? |
| A. | 5’ splice site reorganization |
| B. | 3’ splice site reorganization |
| C. | Branch point site |
| D. | Catalyze 5’ splice site cleavage |
| Answer» C. Branch point site | |
| 36. |
_________ resolution analog-to-digital converter is used in digitization of ECG signal in signal conditioning. |
| A. | 16 bit |
| B. | 12 bit |
| C. | 32 bit |
| D. | 64 bit |
| Answer» C. 32 bit | |
| 37. |
Calculate the axial stress induced in the pipe is the water mean of 1.5 metres diameter and 20 mm thick is subjected to an internal pressure of 1.5 N/mm2. |
| A. | 28.125 N/mm<sup>2</sup> |
| B. | 35.675 N/mm<sup>2</sup> |
| C. | 46.785 N/mm<sup>2</sup> |
| D. | 67.845 N/mm<sup>2</sup> |
| Answer» B. 35.675 N/mm<sup>2</sup> | |
| 38. |
In which modulation, frequency of carrier signal is varied with the amplitude of modulating signal? |
| A. | FM |
| B. | AM |
| C. | PM |
| D. | VSB |
| Answer» B. AM | |
| 39. |
The unit that performs scheduling of instructions by determining the data dependencies is |
| A. | fetch-decode unit |
| B. | dispatch-execute unit |
| C. | retire unit |
| D. | none |
| Answer» C. retire unit | |
| 40. |
Gastrulation occurs during the 2nd week of embryonic development. |
| A. | True |
| B. | False |
| Answer» B. False | |
| 41. |
What is the shape of the lymph nodes? |
| A. | tubular |
| B. | circular |
| C. | cuboidal |
| D. | ovoid |
| Answer» E. | |
| 42. |
M13 filamentous phage DNA molecule is smaller than the head-and-tail lambda phage. |
| A. | True |
| B. | False |
| Answer» B. False | |
| 43. |
The function of flame cell is ____________ |
| A. | Excretion |
| B. | Digestion |
| C. | Respiration |
| D. | Reproduction |
| Answer» B. Digestion | |
| 44. |
Which of the following navigator object properties is the same in both Netscape and IE? |
| A. | navigator.appCodeName |
| B. | navigator.appName |
| C. | navigator.appVersion |
| D. | none of the mentioned |
| Answer» B. navigator.appName | |
| 45. |
The plugging braking gives the _____________ |
| A. | Zero torque braking |
| B. | Smallest torque braking |
| C. | Highest torque braking |
| D. | Variable torque braking |
| Answer» D. Variable torque braking | |
| 46. |
For hard materials, ______ helix angle is used. |
| A. | small |
| B. | large |
| C. | zero |
| D. | none of the mentioned |
| Answer» B. large | |
| 47. |
Skempton observed that the factor Nc increases with the ratio___________ |
| A. | D/B |
| B. | B/D |
| C. | H/Hc |
| D. | c/cm |
| Answer» B. B/D | |
| 48. |
What are the limitations of the semantic networks? |
| A. | Intractability |
| B. | Lack in expressing some of the properties |
| C. | Incomplete |
| D. | Has memory constraints |
| Answer» C. Incomplete | |
| 49. |
________ designed for an Internet work environment with small wireless cells. |
| A. | MMP |
| B. | RMDP |
| C. | RM2 |
| D. | Mobicast |
| Answer» E. | |
| 50. |
Creep in belt drive is due to |
| A. | weak material of the belt |
| B. | weak material of the pulley |
| C. | uneven extensions and contractions of the belt when it passes from tight side to slack side |
| D. | expansion of the belt |
| Answer» D. expansion of the belt | |