Explore topic-wise MCQs in Bachelor of Sc in Computer Science FY.

This section includes 90 Mcqs, each offering curated multiple-choice questions to sharpen your Bachelor of Sc in Computer Science FY knowledge and support exam preparation. Choose a topic below to get started.

1.

Which causes the microprocessor to immediately terminate its present activity:

A. reset signal
B. interupt signal
C. both
D. none of these
Answer» B. interupt signal
2.

A typical personal computer used for business purposes would have… of RAM.

A. 4 kb
B. 16 k
C. 64 k
D. 256 k
Answer» E.
3.

ALE stand for:

A. address latch enable
B. address light enable
C. address lower enable
D. address last enable
Answer» B. address light enable
4.

A/n …. Device is any device that provides information, which is sent to the CPU

A. input
B. output
C. cpu
D. memory
Answer» B. output
5.

A directly accessible appointment calendar is feature of a … resident package

A. cpu
B. memory
C. buffer
D. alu
Answer» C. buffer
6.

Current SIMMs have either … or … connectors (pins)

A. 9 or 32
B. 30 or 70
C. 28 or 72
D. 30 or 72
Answer» E.
7.

DIP stand for:

A. deal inline package
B. dual inline package
C. direct inline package
D. digital inline package
Answer» C. direct inline package
8.

BP stand for:

A. bit pointer
B. base pointer
C. bus pointer
D. byte pointer
Answer» C. bus pointer
9.

The size of each segment in 8086 is:

A. 64 kb
B. 24 kb
C. 50 kb
D. 16kb
Answer» B. 24 kb
10.

Each memory location has:

A. address
B. contents
C. both a and b
D. none of these
Answer» D. none of these
11.

Which of the following memories needs refresh?

A. sram
B. dram
C. rom
D. all of above
Answer» C. rom
12.

Microprocessor reference that are available in the cache are called______:

A. cache hits
B. cache line
C. cache memory
D. all of these
Answer» B. cache line
13.

The four index register can be used for:

A. arithmetic operation
B. multipulation operation
C. subtraction operation
D. all of these
Answer» B. multipulation operation
14.

A microprocessor retries instructions from :

A. control memory
B. cache memory
C. main memory
D. virtual memory
Answer» D. virtual memory
15.

BCD stands for:

A. binary coded decimal
B. binary coded decoded
C. both a & b
D. none of these
Answer» B. binary coded decoded
16.

Current SIMMs have either … or … connectors (pins)

A. 9 or 32
B. 30 or 70
C. 28 or 72
D. 30 or 72
Answer» E.
17.

A/n …. Device is any device that provides information, which is sent to the CPU

A. input
B. output
C. cpu
D. memory
Answer» B. output
18.

The term gigabyte refers to

A. 1024 bytes
B. 1024 kilobytes
C. 1024 megabytes
D. 1024 gigabyte
Answer» D. 1024 gigabyte
19.

A directly accessible appointment calendar is feature of a … resident package

A. cpu
B. memory
C. buffer
D. alu
Answer» C. buffer
20.

To locate a data item for storage is

A. field
B. feed
C. database
D. fetch
Answer» E.
21.

Which of the following terms is the most closely related to main memory?

A. non volatile
B. permanent
C. control unit
D. temporary
Answer» E.
22.

The first digital computer built with IC chips was known as

A. ibm 7090
B. apple – 1
C. ibm system / 360
D. vax-10
Answer» D. vax-10
23.

The instructions for starting the computer are house on

A. random access memory
B. cd-rom
C. read only memory chip
D. all of above
Answer» D. all of above
24.

An error in computer data is called

A. chip
B. bug
C. cpu
D. storage device
Answer» C. cpu
25.

A 32 bit microprocessor has the word length equal to

A. 2 byte
B. 32 byte
C. 4 byte
D. 8 byte
Answer» D. 8 byte
26.

Which of the following memories has the shortest access times?

A. cache memory
B. magnetic bubble memory
C. magnetic core memory
D. ram
Answer» B. magnetic bubble memory
27.

Which of the following memories allows simultaneous read and write operations?

A. rom
B. ram
C. eprom
D. none of above
Answer» C. eprom
28.

The secondary storage devices can only store data but they cannot perform

A. arithmetic operation
B. logic operation
C. fetch operations
D. either of the above
Answer» E.
29.

What is the responsibility of the logical unit in the CPU of a computer?

A. to produce result
B. to compare numbers
C. to control flow of information
D. to do math’s works
Answer» C. to control flow of information
30.

Can you tell what passes into and out from the computer via its ports?

A. data
B. bytes
C. graphics
D. pictures
Answer» B. bytes
31.

Which part of the computer is used for calculating and comparing?

A. disk unit
B. control unit
C. alu
D. modem
Answer» D. modem
32.

What are the three decisions making operations performed by the ALU of a computer?

A. grater than
B. less than
C. equal to
D. all of the above
Answer» E.
33.

The word length of a computer is measured in

A. bytes
B. millimeters
C. meters
D. bits
Answer» E.
34.

A typical personal computer used for business purposes would have… of RAM.

A. 4 kb
B. 16 k
C. 64 k
D. 256 k
Answer» E.
35.

Which company is the biggest player in the microprocessor industry?

A. motorola
B. ibm
C. intel
D. amd
Answer» D. amd
36.

Before a disk can be used to store data. It must be…….

A. formatted
B. reformatted
C. addressed
D. none of the above
Answer» B. reformatted
37.

Which is the type of memory for information that does not change on your computer?

A. ram
B. rom
C. eram
D. rw / ram
Answer» C. eram
38.

Which of the following items are examples of storage devices?

A. floppy / hard disks
B. cd-roms
C. tape devices
D. all of the above
Answer» E.
39.

Most important advantage of an IC is its

A. easy replacement in case of circuit failure
B. extremely high reliability
C. reduced cost
D. low powers consumption
Answer» C. reduced cost
40.

An integrated circuit is

A. a complicated circuit
B. an integrating device
C. much costlier than a single transistor
D. fabricated on a tiny silicon chip
Answer» E.
41.

The first microprocessor built by the Intel Corporation was called

A. 8008
B. 8080
C. 4004
D. 8800
Answer» D. 8800
42.

One of the main feature that distinguish microprocessors from micro-computers is

A. words are usually larger in microprocessors
B. words are shorter in microprocessors
C. microprocessor does not contain i/o devices
D. exactly the same as the machine cycle time
Answer» D. exactly the same as the machine cycle time
43.

Registers, which are partially visible to users and used to hold conditional, are known as

A. pc
B. memory address registers
C. general purpose register
D. flags
Answer» D. flags
44.

Which of the following memory medium is not used as main memory system?

A. magnetic core
B. semiconductor
C. magnetic tape
D. both a and b
Answer» D. both a and b
45.

The memory which is programmed at the time it is manufactured

A. prom
B. ram
C. prom
D. eprom
Answer» B. ram
46.

Which of the following is used as a primary storage device?

A. magnetic drum
B. prom
C. floppy disk
D. all of these
Answer» C. floppy disk
47.

The language that the computer can understand and execute is called

A. machine language
B. application software
C. system program
D. all of the above
Answer» B. application software
48.

Which of the following are the two main components of the CPU?

A. control unit and registers
B. registers and main memory
C. control unit and alu
D. alu and bus
Answer» D. alu and bus
49.

INTR: it implies the__________ signal:

A. intrrupt request
B. intrrupt right
C. intrrupt rongh
D. intrrupt reset
Answer» B. intrrupt right
50.

Which is responsible for all the outside world communication by the microprocessor:

A. biu
B. piu
C. tiu
D. liu
Answer» B. piu