Usually a CT has ____________ – McqOptions

MCQOPTIONS

1.	Usually a CT has ____________
A.	Power overload capacity than PT
B.	The same overload capacity as a PT
C.	A higher overload capacity than a PT
D.	No overload capacity
Answer» D. No overload capacity

Discussion

No Comment Found

Related MCQs

The CT supplies current to the current coil of a wattmeter power factor meter, energy meter and, an ammeter. These are connected as?
Usually a CT has ____________
The observation when the secondary winding of a current transformer is open-circuited is?
A (350 A/ 7A), 50 Hz current transformer has a primary bar. The secondary burden is a pure resistance of 1 and it draws a current of 5 A. The magnetic core requires 350 AT for magnetization. Find the percentage ratio error.
A 200/1 Current Transformer (CT) is wound with 400 turns on the secondary on a toroidal core. When it carries a current of 180 A on the primary, the ratio is found to be -0.5%. If the number of secondary turns is reduced by 1, the new ratio error (in %) will be?
A 1000/5 A, 50 Hz correct transformer has a secondary burden comprising a non-inductance of 2 . What is the ratio error, if the iron loss is 3 W and magnetizing mmf is 250 A?
A 1000/5 A, 50 Hz correct transformer has a secondary burden comprising a non-inductance of 1.6 . The flux in the core at full load is?
A 50 Hz, bar primary CT has a secondary with 500 turns. The secondary supplies 5 A current into a purely resistive burden of 1 . The magnetizing ampere-turns are 200. What is the ratio error at full load, if the iron loss is 1.5 W and magnetizing mmf is 100 A?
A 50 Hz, bar primary CT has a secondary with 800 turns. The secondary supplies 7 A current into a purely resistive burden of 2 . The magnetizing ampere-turns are 300. The phase angle is?