Two involute gears in a mesh have a module of 10 mm and the pressure angle is 35¬¨¬®‚Äö√†√ª. The larger gear has 45 teeth whereas the pinion has 15 teeth. The addendum is equal to one module. Find the arc of contact.$#

Two involute gears in a mesh have a module of 10 mm and the pressure a

1.	Two involute gears in a mesh have a module of 10 mm and the pressure angle is 35¬¨¬®‚Äö√†√ª. The larger gear has 45 teeth whereas the pinion has 15 teeth. The addendum is equal to one module. Find the arc of contact.$#
A.	36. 832 mm
B.	32.460 mm
C.	39.626 mm
D.	27.239 mm
Answer» D. 27.239 mm

Discussion

No Comment Found

Related MCQs

The pressure angle of two gears in a mesh is φ = 25°. The number of teeth on the pinion is 45 and the gear ratio is 2. The module is 6 mm and addendum = 1.1 module. Find the contact ratio of these two gears.
The pressure angle of two gears in a mesh is φ = 22.5°. The number of teeth on the pinion is 25 and the gear ratio is 2. The module is 7 mm and addendum = 1 module. Find the angle of action of these two gears.
Two involute gears in a mesh have a module of 10 mm and the pressure angle is 35°. The larger gear has 45 teeth whereas the pinion has 15 teeth. The addendum is equal to one module. Find the arc of contact.
The path of approach = 13.92 mm and path of recess = 11.56 mm. The pressure angle is 22.5°. The module is 4 mm. Find the contact ratio of these two gears.
The path of contact of two gears in a mesh is 50 mm and the pressure angle is 45°. The module is 8 mm. Find the contact ratio of these two gears.
Two involute gear have a module of 5 mm, the arc of contact is 25 mm. Find the contact ratio of these two gears.
Two gears in a mesh have the arc of contact = 27 mm. The pressure angle is 15°. Find the path of contact.
Two involute gears have path of contact 40 mm and the pressure angle is 50°. Find the arc of contact.
THE_PATH_OF_CONTACT_OF_TWO_GEARS_IN_A_MESH_IS_50_MM_AND_THE_PRESSURE_ANGLE_IS_45¬¨¬®‚ÄÖ√†√ª._THE_MODULE_IS_8_MM._FIND_THE_CONTACT_RATIO_OF_THESE_TWO_GEARS.?$#
Two involute gears in a mesh have a module of 10 mm and the pressure angle is 35¬¨¬®‚Äö√†√ª. The larger gear has 45 teeth whereas the pinion has 15 teeth. The addendum is equal to one module. Find the arc of contact.$#

Two involute gears in a mesh have a module of 10 mm and the pressure angle is 35¬¨¬®‚Äö√†√ª. The larger gear has 45 teeth whereas the pinion has 15 teeth. The addendum is equal to one module. Find the arc of contact.$#

Discussion

No Comment Found

Related MCQs

Reply to Comment