The tolerances on the cross-section of the test specimens shall be wi – McqOptions

MCQOPTIONS

1.	The tolerances on the cross-section of the test specimens shall be within ± ____________
A.	1%
B.	2%
C.	3%
D.	5%
Answer» C. 3%

Discussion

No Comment Found

Related MCQs

A data acquisition system capable of digitally recording and storing load and deflection data at least ___________
The flexural strength (or modulus of rupture) is obtained for the first peak load, Pmax as _______________
The tolerances on the cross-section of the test specimens shall be within ± ____________
What is equivalent flexural strength ratio?
A_DATA_ACQUISITION_SYSTEM_CAPABLE_OF_DIGITALLY_RECORDING_AND_STORING_LOAD_AND_DEFLECTION_DATA_AT_LEAST____________?$
The flexural strength (or modulus of rupture) is obtained for the first peak load, Pmax as:______________?
The tolerances on the cross-section of the test specimens shall be within ¬¨¬®¬¨¬± ____________$
Load measuring device shall be capable of measuring loads to an accuracy of ___________
Rule (ruler/scale), capable of reading the dimensions of test specimens to an accuracy of ________
Calipers, capable of reading the dimensions of test specimens to an accuracy of ____________