The thyristor turn-off requires that the anode current – McqOptions

MCQOPTIONS

1.	The thyristor turn-off requires that the anode current
A.	falls below the holding current
B.	falls below the latching current
C.	rises above the holding current
D.	rises above the latching current
Answer» B. falls below the latching current

Discussion

No Comment Found

Related MCQs

___________ commutation technique is commonly employed in series inverters.
The natural reversal of ac supply voltage commutates the SCR in case of
The type of commutation in which the pulse to turn off the SCR is obtained by separate voltage source is
The type of commutation when the load is commutated by transferring its load current to another incoming thyristor is
An SCR is connected in series with L = 5 mH and C = 20 μF. Find the resonant frequency of the circuit.
In case of class B commutation or resonant-pulse commutation with L = 5 μH and C = 20 μC with the initial voltage across the capacitor (Vs) = 230 V. Find the conduction time for auxiliary thyristor.
In case of class B commutation or resonant-pulse commutation with L = 5 μH and C = 20 μC with initial voltage across the capacitor (Vs) = 230 V. Find the peak value of resonant current.
The class A commutation or load commutation is possible in case of
In case of class A type commutation or load commutation with low value of R load the
The thyristor turn-off requires that the anode current