The prestressing force of 90 to 95 percent is obtained at about: – McqOptions

MCQOPTIONS

1.	The prestressing force of 90 to 95 percent is obtained at about:
A.	Half of transmission length
B.	Three fourth of transmission length
C.	Four third of transmission length
D.	1.5 of transmission length
Answer» C. Four third of transmission length

Discussion

No Comment Found

Related MCQs

A pre tensioned beam is prestressed using 5mm diameter wires with an initial stress of 80 percent of the ultimate strength of steel fpu = 1600n/mm2. Calculate average bond stress?
A pretensioned beam is prestressed using 5mm diameter wires, τ bp = 7.42, ϕ = 0.00725, Lt = 485mm. Calculate the bond stress at l/4 and l/2 the transmission length from the end?
A pre tensioned beam is prestressed with the cube strength of concrete at transfer is 30n/mm2 (β = 0.0235) calculate the transmission length?
The prestressing force of 90 to 95 percent is obtained at about ____________
The stress in a steel wire gradually increases from zero to the ____________
The magnitude of the average bond stress compared to the maximum local bond stress is considerably ____________
According to Marshall the wires of 2 and 5mm diameter are stressed to ____________
The relations proposed by Marshall for bond stress are given as ____________
The bond stress is zero at the distance equal to the ____________
The magnitude of bond stresses is developed between ____________