The precast prestressed I and inverted T beams have been standardized – McqOptions

MCQOPTIONS

1.	The precast prestressed I and inverted T beams have been standardized by:
A.	Pulverization association
B.	Cement and concrete association
C.	Brick association
D.	Steel association
Answer» C. Brick association

Discussion

No Comment Found

Related MCQs

Calculate spacing of a prestressed concrete T slab using 12mm diameter of two legged stirrups such that fc is 415, vcw = 1900kn, balance shear is 934×103?
Calculate the slope angle such that eccentricity is 750, length is 40m and stress induced is 1000n/m2?
Check for ultimate shear strength such that shear force, Vu = 2834 kn, According to IRC: 18-2000, the ultimate shear resistance of the support section uncracked in flexure loss ratio is 0.8, p is 12000×103, area is 0.88 x 106mm2?
Calculate failure by crushing of concrete such that bw is 200, d is 1750, fck is 60n/mm2, b is800, Df is 400?
Calculate the mid support section given that Ap = 7980mm2, fck = 60n/mm2, b = 800mm, fp = 1862n/mm2, bw = 200mm, Mu(required) = 16865knm, Dt = 400mm, d = 1750mm, failure by yielding of steel?
Calculate effective length of Road on a highway given the overall thickness is 500mm and thickness of wearing coarse is 80mm (x is 3.6m)?
Calculate bending moment of dead load given total load = 14n/mm2, Dead load bending moment dead weight of slab = 12kn/m2, dead weight of w.c = 1.76kn/m2, span length is 10.4m?
Calculate Permissible stresses compressive stresses in concrete at transfer and working loads, as recommended given fct = 15n/mm2, fst = 0.8, fcw is 12n/mm2?
Long span continuous prestressed concrete bridges are built of which type of box girders?
In India, a large number of long span bridges have been constructed using __________