The most adopted earthen section for tank bunds is of the type ______ – McqOptions

MCQOPTIONS

1.	The most adopted earthen section for tank bunds is of the type ___________________
A.	homogeneous embankment type
B.	zoned embankment type
C.	diaphragm type
D.	both diaphragm and zoned type embankment
Answer» B. zoned embankment type

Discussion

No Comment Found

Related MCQs

What is the approximate value of side slope of the bund for smaller tanks with water depths not exceeding 2.5 m in favorable soils such as red and white gravel, red and black loams?
The most adopted earthen section for tank bunds is of the type ___________________
If A1 and A2 represent the areas enclosed between two successive contours, then the cubic content between these contours is roughly taken as _________________
The usual arrangement made in a tank-bund scheme to spill the surplus excess water is known as ________________________
The top-level of a tank weir in a tank bund scheme is kept at ________
If A1 represents the area of a tank bed at bottom and A2 is the area of the tank at F.T.L, then the storage capacity of the tank of height H is given as ________________________
The cubic meters of water that can be stored in an irrigation tank between full tank level and sill level of the lowest supply sluice is known as __________________
The provision of suitable breaching sections becomes more important in irrigation tanks which are isolated.
The storage created on the upstream side of a smaller stream by the construction of low earthen bunds is technically known as _________________
The depth of water stored in an irrigation tank rarely exceeds ______________