The mode of propagation of propagation supported by coupled line coupl – McqOptions

MCQOPTIONS

1.	The mode of propagation of propagation supported by coupled line couplers is:
A.	TM mode
B.	TE mode
C.	TEM mode
D.	quasi TEM mode
Answer» D. quasi TEM mode

Discussion

No Comment Found

Related MCQs

The capacitance per unit length of broadside parallel lines with width W and separation d is:
Three section binomial couplers have very low directivity as compared to other coupler designs.
Multisection couplers have a very narrow operational bandwidth which is a major disadvantage.
If the coupling coefficient of a coupled line coupler is 0.1 and the characteristic impedance of the material is 50 Ω, then the odd mode characteristic impedance is:
For coupled line coupler, if the voltage coupling factor is 0.1 and the characteristic impedance of the microstrip line is 50 Ω, even mode characteristic impedance is:
THREE_SECTION_BINOMIAL_COUPLERS_HAVE_VERY_LOW_DIRECTIVITY_AS_COMPARED_TO_OTHER_COUPLER_DESIGNS.?$
The_capacitance_per_unit_length_of_broadside_parallel_lines_with_width_W_and_separation_d_is:$
Multisection couplers have a very narrow operational bandwidth which is a major disadvantage?
Dielectric and conductor loss have no effect on the directivity of the coupled line coupler.
If the coupling coefficient of a coupled line coupler is 0.1 and the characteristic impedance of the material is 50 ‚âà√≠¬¨¬©, then the odd mode characteristic impedance is:$