The membrane filtration level with the smallest pore size (0.0001 0. – McqOptions

MCQOPTIONS

1.	The membrane filtration level with the smallest pore size (0.0001 0.001 m) is called_____________
A.	Micro filtration
B.	Reverse osmosis
C.	Nano filtration
D.	Ultra filtration
Answer» C. Nano filtration

Discussion

No Comment Found

Related MCQs

For surface water system, the required residual disinfectant concentration may not be less than _______ mg/L for more than ___________ hours before the first customer.
Which of the following mechanisms is not used by a membrane filter to remove particulate material from the water?
A raw water reservoir would be an example of which membrane pretreatment method (where the goal is to reduce the loading and fouling potential of the water fed to the membrane)?
Which of the following remains the primary use of membrane filtration in water treatment?
The filtered water that has been treated by a membrane filter is called _____________
The flow rate through the membrane filter itself expressed as a gallon per square foot per day is called?
The membrane filtration level with the smallest pore size (0.0001 0.001 m) is called_____________
What is the specific flux of the system if it contains 75 sq. ft. of filter area and operates for 24 hours at a flow rate of 5 gpm? Assume that the water temperature is 20 and the TMP of the system is 20 psi.
What is the flux of a membrane filter if it contains 75 sq. ft. of filter area and operates for 24 hours at a flow rate of 5 gpm? Assume that the water temperature is 20 .