The joint in the trusses are generally formed by welding the materials – McqOptions

MCQOPTIONS

1.	The joint in the trusses are generally formed by welding the materials at the ends of the trusses on a common plate. Which gives strength to the design. What is that plate called?
A.	Gusset Plate
B.	Ignified plate
C.	Non-metallic plate
D.	Gymnite plate
Answer» B. Ignified plate

Discussion

No Comment Found

Related MCQs

Truss cannot be acted upon three force members. Because the truss in a single plane.
A truss is facing a two force member and both of them are in the opposite directions. And the truss is in equilibrium. And both of them are coming towards each other. The forces are called __________
A truss is facing a two force member and both of them are in the opposite directions. And the truss is in equilibrium. And both of them are getting away from each other.The forces are called?
There are no rules for the designing of the truss. But there are rules designing the bridges.
When the bridges are extended over long routes or distance then a rocker or a roller is used at the joints. As when the temperature is raised the elongations and the contractions of the joints part are not much affected if the rollers and rockers are used.
The transmission of the load on a certain type of a structure follow as from stringers to floor beams and then joints. Determine the structure.
Trusses lie in a single plane. And the calculations used to solve the forces are from vector math.
The joint in the trusses are generally formed by welding the materials at the ends of the trusses on a common plate. Which gives strength to the design. What is that plate called?