MCQOPTIONS
Bookmark
Saved Bookmarks
→
Signals & Systems Questions and Answers
→
Applications of Signals on Circuits in Signals & Systems Questions and Answers
→
The final value of X(s) = \(\frac{12(s+1)}{s(s^2+4..
1.
The final value of X(s) = \(\frac{12(s+1)}{s(s^2+4)}\) is _________
A.
1
B.
2
C.
3
D.
Undetermined
Answer» E.
Show Answer
Discussion
No Comment Found
Post Comment
Related MCQs
A relay coil having voltage of magnitude 210 V and frequency 50 Hz is connected to a 210 V, 50 Hz supply. If it has resistance of 50 Ω and an inductance of 0.2 H, the apparent power is _____________
Let x(t) be a continuous time, real valued signal band limited to F Hz. The Nyquist sampling rate in Hz, for y(t) = x(0.5t) + x(t) – x(2t) is ______________
Given, R = 10 Ω, L = 100 mH and C = 10 μF. Selectivity is ____________
A current I given by I = – 8 + 6\(\sqrt{2}\) (sin (ωt + 30°)) A is passed through three meters. The respective readings (in ampere) will be?
A voltage LT is given as \(\frac{4s^2+3s+2}{7s^2+6s+5}\). It is applied across a 2H inductor having zero initial current. The current in the inductor at t = ∞ is ___________
Given that, F(s) = \(\frac{w}{s^2+w^2}\). Re[s]>0. The final value of f(t) is ___________
The Laplace transform of a signal is given as Y(s) = \(\frac{1}{s(s-1)}\), then the final value is ___________
The final value of X(s) = \(\frac{12(s+1)}{s(s^2+4)}\) is _________
The impulse response h[n] of a linear time-invariant system is h[n] = u [n+3] + u [n-2] – 2u [n-7] where, u[n] is the step unit response. The above system is ________________
For any given signal, average power in its 6 harmonic components as 10 mW each and fundamental component also has 10 mV power. Then, average power in the periodic signal is _______________
Reply to Comment
×
Name
*
Email
*
Comment
*
Submit Reply