The correct way of representing the compression ratio is __________ – McqOptions

MCQOPTIONS

1.	The correct way of representing the compression ratio is __________
A.	C.R.=\(\frac{Total \, cylinder \, volume}{Clearance \, Volume} \)
B.	C.R.=\(\frac{Clearance \, Volume}{Total \, Clearance \, Volume} \)
C.	C.R.=\(\frac{Total \, clearance \, volume}{Cylinder \, Volume} \)
D.	C.R.=\(\frac{Clearance \, volume}{Total \, cylinder \, volume} \)
Answer» B. C.R.=\(\frac{Clearance \, Volume}{Total \, Clearance \, Volume} \)

Discussion

No Comment Found

Related MCQs

The minimum temperature required for a liquid fuel to form a spontaneously combustible mixture is known as ____________
Which of the following is not a function of a flywheel?
A diesel engine transmits 25 KW at the end of the crankshaft, moving at 1650 rev/min, find the torque exerted by the piston.
A six-cylinder 4-stroke engine has bore diameter 11 cm and stroke length 12.2 cm running at 2800 rev/min consumes 455m2 of air per hour. What would be the volumetric efficiency of the engine?
A high-speed diesel engine operating at 2000 rev/min has a single cylinder. During the compression stroke, the fuel injection starts 20° before TDC and ends at TDC. Determine the duration the fuel injection takes place.
Which of the following is not an example of drawbar dynamometer?
The correct way of representing the compression ratio is __________
The device in which air-fuel mixture is prepared away from the cylinder of an engine is known as __________
The process of removal of burnt or exhaust gases from the engine cylinder is known as ___________
Which engine is designed to convert chemical energy of heavier fuel oil into mechanical energy?