MCQOPTIONS
Bookmark
Saved Bookmarks
→
Microprocessors
→
Semiconductor Memory Interfacing
→
The clock frequency applied at the CLK pin is inte..
1.
The clock frequency applied at the CLK pin is internally divided by
A.
2
B.
4
C.
8
D.
1
Answer» B. 4
Show Answer
Discussion
No Comment Found
Post Comment
Related MCQs
TO_FILTER_THE_OUTPUT,_A_0.047MICROFARADS,_12V_CAPACITOR_IS_CONNECTED_BETWEEN_THE_PINS?$
The signal that causes the 80286 to perform the processor extension interrupt while executing the WAIT and ESC instructions are$
The minimum number of clock cycles required in an input pulse width of the RESET pin i?
The pin that is used to insert wait states in a bus cycle is
The LOCK (active low) is activated automatically by hardware using
If M/IO (active low) signal is ‘0’ then it indicates$
The signals S1 (active low), S2 (active low) are
The 8 address lines, A23-A16 of 80286 are zero during
The clock frequency applied at the CLK pin is internally divided by
The 80286 is available in the package as
Reply to Comment
×
Name
*
Email
*
Comment
*
Submit Reply