The bearings and shaft seals are cooled using ____________ – McqOptions

MCQOPTIONS

1.	The bearings and shaft seals are cooled using ____________
A.	part of the propellant flow
B.	radiation cooling
C.	part of the Exhaust Flow from the nozzle
D.	lubricants
Answer» B. radiation cooling

Discussion

No Comment Found

Related MCQs

____________ is limited by the possibility of excessive cavitation.
If the densities of the propellants are very different from one another, the pump head raise is ___________ for the lower-density propellant compared to higher-density propellant.
The total propellant flow at the pump outlet is ____________ the flow in combustion chamber and the discharge pressure is __________ chamber pressure plus the other insignificant pressure losses in the system.
Which of these will lead to lower reliability from design perspective of turbopumps?
A geared turbopump has ___________ efficiency for the turbine and ____________ efficiency for the pump.
The bearings and shaft seals are cooled using ____________
Majority of the kinetic energy imparted by the impeller to the flow is converted to ___________ in diffuser.
The propellant enters the pump through __________
Main purpose of a turbopump is to ____________
Which of the following is the term used to denote a turbine with one or more pumps?