Primary and the secondary winding of the transformer are interlaced m – McqOptions

MCQOPTIONS

1.	Primary and the secondary winding of the transformer are interlaced mainly for __________
A.	reducing leakage flux
B.	reducing cost
C.	reducing heating
D.	saving the copper of the winding
Answer» B. reducing cost

Discussion

No Comment Found

Related MCQs

A 10 KVA, 2000/200 V, single phase transformer operating at 50 Hz with a current of 50 A flowing through the l.v. winding. Then the Self inductance of l.v. winding is?
There is a 10 KVA, 2000/200 V, single phase transformer operating at 50 Hz. Maximum flux linkages in secondary will be?
There is a 10 KVA, 2000/200 V, single phase transformer having below following parameters are r1=10Ω, r2=0.1Ω, l1 = 40mH, l2=0.4 mH, M = 10H. Then the expected secondary self inductance will be?
Consider a 10 KVA, 2000/200 V, single phase transformer having below following parameters are r1=10Ω, r2=0.1Ω, l1 = 40mH, l2=0.4 mH, M = 10H. Then the expected primary self inductance will be?
The voltage regulation of a transformer at full-load 0.8 p.f lagging is 2%. Its voltage regulation at full load 0.8 p.f leading _____________
The voltage conversion ratio of the transformer is inverse of the current transformation.
In a transformer,eddy-current loss is 1000 watts which is half of the total core loss. If thickness of lamination and frequency are increased by 10%, What is the new core-losses?
Which of the following matches are matched correctly?
Choose the matching which is not matched correctly?
Identify the matching which is not matched correctly?