Mark the stable operating point when the load torque shifts from Tl1 – McqOptions

MCQOPTIONS

1.	Mark the stable operating point when the load torque shifts from Tl1 to Tl2.
A.	A
B.	A,B
C.	B,C
D.	A,C
Answer» B. A,B

Discussion

No Comment Found

Related MCQs

A 3-phase, 50 Hz, 6-pole induction motor has a shaft output of 10kW at 930 rpm. Friction and windage losses is 1% of the output. Total stator losses is 600W. What is the stator input?
A 3-phase, 50 Hz, 6-pole induction motor has a shaft output of 10kW at 930 rpm. Friction and windage losses is 1% of the output. Total stator losses is 600W. What is the rotor input?
Mark the stable operating point when the load torque shifts from Tl1 to Tl2.
The stable point to use the induction motor possesing the below characteristic.
At which point shall the induction machine be operated to attain a stable operation?
The stable point in the operation of the induction motor is?
For a three phase induction motor, maximum torque is double the full load torque and starting torque is 1.6 times the full load torque. To get a full load slip of 5%, percentage reduction in the rotor resistance should be?
Introducing the external resistance decreases _________
Introducing the external resistance increases _________
A 10 kW, 400 V, 3-phase, 4-pole, 50 Hz induction motor develops the rated output at rated voltage with its slip rings shorted. The maximum torque is twice the full load torque occurs at the slip of 10% with zero external resistance in the rotor circuit. An external resistance is now tripled in the rotor circuit. Then the stator current will _________