MCQOPTIONS
Bookmark
Saved Bookmarks
→
Microwave Engineering
→
Noise Microwave Circuits in Microwave Engineering
→
Lumped elements can be used to make resonators tha..
1.
Lumped elements can be used to make resonators that rare to be operated at microwave frequencies.
A.
True
B.
False
Answer» C.
Show Answer
Discussion
No Comment Found
Post Comment
Related MCQs
Inductance of an open circuited λ/2 transmission line is dependent on the characteristic impedance of the transmission line.
The equivalent capacitance of a short circuited λ/4 transmission line is dependent on the characteristic impedance of the transmission line.
A microstrip patch antenna has a width of 5.08mm and surface resistivity of 1.84*10-2. Then the attenuation due to conductor loss is:
The equivalent resistance of a short circuited λ/4 transmission line is independent of the characteristic impedance of the transmission line.
An air coaxial cable has attenuation of 0.022 and phase constant of 104.7, then the quality factor of a λ/2 short circuited resonator made out of this material is:
A coaxial cable is air filled with air as dielectric with inner and outer radius equal to 1 mm and 4 mm. If the surface resistivity is 1.84*10-2Ω,then the attenuation due to conductor loss is:
Short circuited λ/2 transmission line has a quality factor of:
INDUCTANCE_OF_AN_OPEN_CIRCUITED_‚ÂÀ√≠¬¨‚Ñ¢/2_TRANSMISSION_LINE_IS_DEPENDENT_ON_THE_CHARACTERISTIC_IMPEDANCE_OF_THE_TRANSMISSION_LINE.?$#
The equivalent capacitance of a short circuited λ/4 transmission line is dependent on the characteristic impedance of the transmission line?#
If the attenuation due to dielectric loss and attenuation due to conductor loss in a microstrip transmission line is 0.024Np/m and 0.0724 Np/m, then the unloaded quality factor if the propagation constant is 151 is:
Reply to Comment
×
Name
*
Email
*
Comment
*
Submit Reply