In the method of phase control, the phase relationship between ___ & – McqOptions

MCQOPTIONS

1.	In the method of phase control, the phase relationship between ___ & ___ is controlled by varying the firing angle
A.	supply current, supply voltage
B.	end of the load current, end of the load voltage
C.	start of the load current, start of the load voltage
D.	load current, load voltage
Answer» D. load current, load voltage

Discussion

No Comment Found

Related MCQs

A single-phase half-wave thyristor circuit with R load is triggered at an angle of α = 0°. As such, the maximum value of the average output voltage would be given byConsider Vs = Vm sinωt.
For the below given circuit with firing angle α & angular frequency of ω, the circuit turn-off time in secs can be given by
For a single phase thyristor circuit with R load & firing angle α, the conduction angle can be given by
Below shown ideal circuit is triggered at a firing angle of α. From ωt = π to 2π+α
Below shown ideal circuit is triggered at a firing angle of α. The voltage across the SCR is zero from ωt =
In a single phase half-wave thyristor circuit with R load & Vs=Vm sinωt, the maximum value of the load current can be given by
In the method of phase control, the phase relationship between ___ & ___ is controlled by varying the firing angle
In the below given circuit, the SCR is triggered at a certain firing angle α.The load current falls to zero at ωt =
The average output voltage is maximum when SCR is triggered at ωt =
A voltage source Vs = Vm sinωt is connected in series with a resistance R and an SCR. At some firing angle delay of α a positive gate pulse is applied to the SCR which turns on the SCR. Considering ideal conditions, at the instant α the voltage at the resistor terminals Vo