In coupled line directional couplers, power from one line to another i – McqOptions

MCQOPTIONS

1.	In coupled line directional couplers, power from one line to another is transmitted through a microstrip line running between them.
A.	true
B.	false
Answer» C.

Discussion

No Comment Found

Related MCQs

The capacitance per unit length of broadside parallel lines with width W and separation d is:
Three section binomial couplers have very low directivity as compared to other coupler designs.
Multisection couplers have a very narrow operational bandwidth which is a major disadvantage.
If the coupling coefficient of a coupled line coupler is 0.1 and the characteristic impedance of the material is 50 Ω, then the odd mode characteristic impedance is:
For coupled line coupler, if the voltage coupling factor is 0.1 and the characteristic impedance of the microstrip line is 50 Ω, even mode characteristic impedance is:
THREE_SECTION_BINOMIAL_COUPLERS_HAVE_VERY_LOW_DIRECTIVITY_AS_COMPARED_TO_OTHER_COUPLER_DESIGNS.?$
The_capacitance_per_unit_length_of_broadside_parallel_lines_with_width_W_and_separation_d_is:$
Multisection couplers have a very narrow operational bandwidth which is a major disadvantage?
Dielectric and conductor loss have no effect on the directivity of the coupled line coupler.
If the coupling coefficient of a coupled line coupler is 0.1 and the characteristic impedance of the material is 50 ‚âà√≠¬¨¬©, then the odd mode characteristic impedance is:$